Installation Guide

Parts List

Hardware

Assembly Instruction

Item# 646-4X

Lucia Nightstand with USB Port

RF10052

Screw JCB M6x30

x 6

x 2

x 1

RF40170

Knob

RF40005

Allen Key

Top

Left Panel

Right Panel

1 pc.

USB Adapter Specifications

Input Voltage AC 100-240V 50/60Hz

Input Current ≤ 350mA @ 220V AC w/ full load

Output Voltage 5.0V ± 0.25V

Load Regulation -0.5% (Max)

Output Current 3.1A Max

Output Ripple < 400mV p-p

Efficiency > 75% @ 220V AC

Output Plug USB Type A x 4

Over Power ≈ 17W @ 220V AC

Short Protection Auto Recovery

USB Port

PAGE 1
Assembly Instruction Item# 646-4X Lucia Nightstand with USB Port Hardware x6 RF10052 Screw JCB M6x30 A x2 RF40170 Knob B C x1 RF40005 Allen Key Parts List Top A Left Panel B Right Panel C x1 USB Port 1 pc. 1 pc. 1 pc. USB Adapter Specifications Input Voltage Input Current Output Voltage Load Regulation Output Current Output Ripple Efficiency Output Plug Over Power Short Protection AC 100-240V 50/60Hz ≤ 350mA @ 220V AC w/ full load 5.0V ± 0.25V -0.5% (Max) 3.
PAGE 2
B Step1: Invert the Top (A) on a soft surface. Attach Left (B) and Right Panel (C) into the Top (A) by using screws (RF10052) as per diagram 1. x6 A C RF10052 Diagram 1. x2 RF40170 Step2: Upright the unit. Attach the 2 Knobs (RF40170) into the each front’s drawers as per diagram 2. Diagram 2. Step3: Attach supplied AC cable from underneath the table and plug into a standard wall outlet. Unit is now ready to accept the supplied 3-in-1 cable.