Product Manual Thank you for purchasing our product. Please read this manual before installation and use to ensure that your product will function at peak performance. Read this manual thoroughly and store in a safe place for future references.
IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING Danger To reduce the risk of electrocution: 1. Do not use while bathing. 2. Do not place or store product where it can fall or be pulled into a tub or sink. 3. Do not place in or drop into water or other liquid. 4. Do not reach for a product that has fallen into water. Unplug immediately.
The functions may vary from different part no. Pare. cD Kyoto Functions SAVE THESE INSTRUCTIONS Unlimited Wash Rear Wash GROUNDING INSTRUCTIONS Front Wash Aerated Wash This product should be grounded. In the event of an electrical short circuit, grounding Automatic Wash reduces the risk of electric shock by providing an escape wire for the electric current. This Ingratiating Wash product is equipped with a cord having a grounding wire with a grounding plug.
User Friendly Design Kick control, Radar sensor, New features to offer you an enjoyable experience Rotated Switch Ge Parts Information + eco Overview == rr recreant Remote Control ~~ «=v vee Warnings And Safety Warnings «-greengrocer Attention «cre rear Installation Before You Install Installing Your Product Function Explanations Maintenance Surface Cleaning het Nozzle Maintenance Troubleshooting Power Button Wash Functions Dryer Heated Seat «--vvrrvvrr nnn Remote Control += vv sever Toilet Unit Soft-Closin
102/ HM Remote Control Open/close seat cover Open/close seat ring C Coercion Opposition ), LIBBY sat Ea ET TT Stop Front Wash Clean your front Clean your rear Drying the cleaning Flushing after or Rear Wash area with wam air toileting Adjust the wash Nozzle position For manual Stalemate cleaning Tum the Night intensity of rear can be adjusted nozzle cleaning with hot and cold Light ON/OFF wash and front in 5 positions water temperature wash | | Gases Pisa” Tem TR) Nozzle position ~~ Adjust the wash Adjustab
104f This product needs to be properly grounded. Risk of electric shock If unsure, contact an electrician. electrical installation company. Do not place a lit cigarette along with other burning objects into the unit. X Risk of fire. Do not touch, insert or pull out the power plug with a wet hand. Risk of electric shock. Do not use a power socket in poor condition or a damaged power plug. ¥Risk of fire and/or electric shock. Do not use during thunderstorms (pull out the power plug during storms).
@®Place the battery out of children and infant reach. fixity battery is swallowed, contact a doctor immediately. @If battery fluid leaks onto user, quickly rinse off area using water. @If battery fluid gets into eyes, do not rub your eyes. Quickly rinse it with water and consult a doctor immediately. 3 May result in vision impairment or blindness. When the battery is in use, do not do the following operations. @®Do not hold or store with metal objects (such as a necklace or a watch).
Jello] Before You g E Install Dimensional drawing, water pressure check Confirm dimensions of product with installation space Wall Drain holey distance 212in Side profile 16.3in 26.73in .31in ® Front view Top view Unit:inches is 108 psi. Confirmation of water pressure @® The minimum dynamic operating water pressure is 35 psi, and the maximum static water pressure {Tools: stopwatch, measuring cup.) Open the angle valve for water supply.
4. | Install the ceramic, water supply hoses and T-valve 1. Place the wax ring on the drain hole at the bathroom of 6 Attach the flush water hose to the T valve and tighten, the ceramic Bidet water hose Water supply Flush water hose 7, Attach the bidet water he Val hy 2. Install sealing flange into drain outlet the bidet Apotheoses va anathema 3. Install ceramic taller on corresponding position according to contour line.
7 Testing water flow 8 Connecting power 1.Fully open the angle valve as shown 1.Connect to the grounding. (1)Check if the power light is on. Plug i power plug. in the figure. Plugin AC 120 Tug (2)Powered on: Press and hold the knob for 3 seconds to enter the standby mode. 2.Confirm there is no leaks. In case of water leaking, unfasten the nuts install the in, standing them again 3. Check if the power is on.
HM Auto flush H will automatically flush when user leaves the seat naffer extolling The toilet will only flush once. MW Kick Flush Touch “Foot button” gently. When not seated, approach the product and gently touch this button with your foot, and three foot-touch operations can be performed, i.e., the first time to open the cover, the second time to open the seat, and the third time to close the cover and seat and flush. ¥Please do not touch the button forcefully. wash is not available during flushing.
Lid led T Maintenance Regular maintenance is required to ensure normal use ® Cut off the power and water supply before maintenance. © Direct water wash to the entire product is prohibited. & C1 H Maintenance of product surface and ceramics ® Wipe dust or stains with a soft wet cloth @® A wet soft brush, cloth or sponge may be used to clean the ceramic area % Do not use abrasive cleaning solutions, such as alcohol, hibachi, paint thinner, resole, benzene, gasoline, sic. /\ WARNING Do not spray water or deter
Foe Justifiable Troubleshooting Experiencing issues with your product? Find solutions below to solve your problems. Contact us if the problem persists. Power Button Fault Diagnoses Check whether the plug is loose or not Check the power supply Check whether the power is on (the power light is off) Press the rotated switch for 3s until the power light ion Not working Check whether there is electric Unplug from the outlet and re-plug in.
2) 2 LET 120/ Specifications 120v~ 60Hz 1050W (When inlet water temp in 59 °F) (4 levels) psi, ensuring the water flow at least 108psi (static state) Tom ado Flush Rough-in 12in Instant heating 2°F(4 levels) Butterfly thermostat, thermal fuse, flow sensor levels) Thermal Fuse, bi-Metal levels) Thermal Fuse Two AAA Batteries App 47.