Specifications

R-91
QT-6000 Reference Manual
3-3-8. Order ID change
This command is used to change the target printer of order temporarily.
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select “8. Order ID Change” and press the <YES> key.
4. Select “YES” of the Definition Enable field, and enter an
appropriate ID number of each order printer and press the
<YES> key. Select “YES” of the last line to execute this
command.
Note: D
3
D
2
D
1
In case of D
3
= 1, D
2
& D
1
defines the terminal physical ID that connect to printer-1.
In case of D
3
= 2, D
2
& D
1
defines the terminal physical ID that connect to printer-2.
MGR C 01 10-10-01 12:34 000000
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
↓
0.00
Order ID Change
Definition Enable YES
1.Order1 103
2.Order2 202
3.Order3 203
4.Order4 104
5.Order5 000
6.Order6 000
7.Order7 000
OK? YES
0.00
D
3
D
2
D
1