E DATA PROJECTOR XJ-H1600/XJ-H1650* XJ-ST145*/XJ-ST155* * USB Port Models User’s Guide z Be sure to read the precautions in the separate Setup Guide. For details about setting up the projector, see the Setup Guide. z Be sure to keep all user documentation handy for future reference.
z DLP is a registered trademark of Texas Instruments of the United States. z Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. z XGA is a registered trademark of IBM Corporation of the United States.
Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Operation During Projection ...........
Configuring Advanced Projector Settings .................. 21 Basic Setup Menu Operations .............................................................21 Displaying the Setup Menu........................................................................................ 21 Configuring Setup Menu Settings.............................................................................. 21 Basic Setup Menu Example.......................................................................................
Appendix ........................................................................ 44 Connecting to a Video Device ..............................................................44 Connection to a composite video output or S-video output ..................................... 44 Connection to a component video output ................................................................. 45 Connecting the HDMI Output of a Video Device or Computer to the Projector ....................................................
Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-H1600/XJ-H1650/XJ-ST145/XJ-ST155 z Mercury-free Hybrid Light Source: A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 3500 lumens. This projector does not use a mercury lamp, making it environmentally friendly.
XJ-H1650/XJ-ST145/XJ-ST155 z Projection of Data from USB Memory or a Memory Card without a Computer: USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projector’s USB-A port. The projector comes with special software for converting PowerPoint presentation data to a format that can be stored to USB memory or a memory card and projected without using a computer. Images and movies also can be projected directly from USB memory or a memory card.
Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector.
Back Terminals 1 7 2 3 4 5 6 8 9 bkbl bm bn bo bp bq br 1 USB-A port (XJ-H1650/XJ-ST145/XJ-ST155 only) 2 LAN port (XJ-H1650/XJ-ST145/XJ-ST155 only) 3 HDMI port 4 MONITOR OUT terminal 5 COMPUTER IN 1 terminal 6 COMPUTER IN 2 terminal 7 Remote control signal receiver 8 Power connector 9 SERIAL port*1 bk AUDIO OUT terminal bl Anti-theft lock hole bm AUDIO IN 1 terminal bn AUDIO IN 2 terminal bo AUDIO IN L/R terminals bp VIDEO terminal bq S-VIDEO terminal br USB-B port*2 (XJ-H1650/XJ-ST145/XJ-ST155 only)
Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key. z This displays the input source selection screen. 2. Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project. z For details about the 3D Input Mode, see the explanation in the following section. 3.
3D Input Mode Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D input mode, and then select the input source. Important! z Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 3D. z Separately available special software (CASIO 3D Converter) is required to project a 3D image with the projector when a computer (analog RGB) is the input source.
Returning to the Normal Input Mode from the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Use the [T] and [S] keys to move the highlighting to “To normal input mode” and then press the [ENTER] key. z This enters the normal input mode and closes the input source selection screen. Horizontal Flipping in the 3D Input Mode In side-by-side 3D, a full frame consists of two halves on the left and right for each eye.
Image Operations During Projection You can perform the following operations while projecting an image.
Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important! z The color mode cannot be selected in the following cases. z When “Off” is selected for the Eco Mode setting (page 19) z When the projector is in the 3D input mode. See “3D Input Mode” (page 11). z The color mode cannot be selected while “On” is selected for the setup menu “Option Settings 2 J Interactive Pointer” setting.
Momentarily Cutting Off the Input Source Image 1. Press the [BLANK] key. z This temporarily cuts off the image from the input source and projects a black screen in its place. 2. To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 33. Freezing an Image Pressing the [FREEZE] key freezes the projected image.
Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zero.
Changing the aspect ratio of the projected image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings are as shown below. For details about the meaning of each setting, see the “Aspect Ratio” setting under “Screen Settings Main Menu” on page 32.
Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker. To adjust the volume level 1. Press the [VOLUME] key. z This causes the [Volume] screen to appear on the projected image. 2. Press the [X] key to increase the volume, or the [W] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key. z This causes the [Volume] screen to disappear.
Eco Mode (Power Saving, Low Noise) The following three Eco Mode settings are available to specify whether priority should be given to low-power, low-noise operation or to projection brightness. On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and automatically adjusts projection brightness and color accordingly. Brightness is reduced for darker surroundings, which saves power and reduces operation noise.
Important! z The Eco Mode setting automatically changes to “Off” whenever the projector is in the 3D input mode (“3D Input Mode”, page 11) or “On” is selected for the “Option Settings 2 J Interactive Pointer” setting. z The “On (Auto)” setting cannot be selected for the Eco Mode while “On” is selected for “Screen Settings J Ceiling Mount” on the setup menu.
Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Basic Setup Menu Operations Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Main menu Pressing the [MENU] key displays the main menu. The currently selected menu item is the one that is highlighted. Sub-menu The sub-menu shows each individual setting under each main menu item, and its current setting.
Basic Setup Menu Example The procedure below shows how to configure the following three settings: z Image Adjustment 1 J Contrast z Image Adjustment 1 J Color Mode z Input Settings J Signal Name Indicator Note z The setup menu items that you can change depend on whether or not an image signal is being input to the projector, and on the currently selected input source. Perform the procedure below after starting projection of an image from an input source in the normal input mode.
To configure the “Image Adjustment 1 J Color Mode” setting 5. Use the [T] key to select “Color Mode”. 6. Press the [ENTER] key. z This displays the color mode menu. 7. Use the [T] and [S] keys to select the color mode you want, and then press the [ENTER] key. 8. After selecting the color mode you want, press the [ESC] key. To configure the “Input Settings J Signal Name Indicator” setting 9. Press the [ESC] key. 10. Use the [T] key to select “Input Settings”. 11. Press the [ENTER] key. 12.
Password Protecting the Projector The password feature lets you keep unauthorized individuals from using the projector. You can specify whether password input is required whenever you turn on the projector, and you can specify and change the password as required. Use the setup menu “Option Settings 1 J Power On Password” setting to configure power on password settings.
Keep a written record of your password! You will not be able to use the projector if you forget its password. We strongly suggest that you keep a written or other type of record of the password so you can look it up when necessary. To change the password 1. Press the [MENU] key to display the setup menu. 2. Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key. 3. Use the [T] key to select “Power On Password”, and then press the [ENTER] key.
To turn password protection on and off 1. Display the Power On Password setting screen by performing steps 1 through 5 of the procedure under “To change the password” on page 25. z At this time, make sure that “Power On Password” is selected on the Power On Password setting screen. 2. Use the [W] and [X] keys to select “On” or “Off”. z Changing the power on password setting from “Off” to “On” causes the confirmation dialog box shown below to appear.
Restoring Projector Settings to Their Initial Factory Defaults You can use the procedures in this section to restore all of the settings on a particular main menu or all of the settings on the setup menu to their initial factory defaults. To restore all settings on a particular main menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [T] and [S] keys to select the main menu whose settings you want to restore to their initial factory defaults.
To restore all settings on the setup menu to their initial factory defaults 1. Press the [MENU] key to display the setup menu. 2. Use the [T] key to select “Restore All Defaults” and then press the [ENTER] key. 3. After confirming that “Restore All Defaults” sub-menu is selected, press the [ENTER] key. z This displays a confirmation message asking if you want to initialize all settings. 4. Use the [S] key to select “Yes”. 5.
Setup Menu Contents This section contains tables that provide detailed explanations of all of the items included on the setup menu. The following describes the type of information that appears in each of the columns of the tables. Setting Name: This column shows the names of the settings as they appear on the sub-menu. Input: This column shows the input source for which each setting is supported.
Setting Name Input Setting Unit Description Color Mode RCV HDU Source Specific You can select from among various different color mode settings in accordance with image contents and projection conditions. Standard: Use this setting when you want to highlight the colors of your presentation. Graphics: Use this setting when you want photographs and graphics to appear natural. Theater: Use this setting to bring out the dark portions of your images.
Image Adjustment 2 Main Menu Setting Name Input Setting Unit Description Vertical Position RCV Signal Specific Use this sub-menu to adjust the vertical position of the input source image within the projection area. Horizontal Position RCV Signal Specific Use this sub-menu to adjust the horizontal position of the input source image within the projection area.
Screen Settings Main Menu Setting Name Input Setting Unit Description Keystone Correction R C V H D U N Single Use this sub-menu to correct vertical keystoning of the projected image. Aspect Ratio RCV HD Use this sub-menu to select an aspect ratio setting for the projected image. Source Specific Input Source: RGB or HDMI (PC) Normal*: Projects at the projector’s maximum possible size while maintaining the input signal aspect ratio.
Setting Name Input Setting Unit Description Startup Screen R C V H D U N Single Use this sub-menu to specify whether or not a startup screen should be projected whenever the projector is turned on. Logo: Select this option to project the projector’s built-in logo screen at startup. None*: Select this option when you do not want to project a startup screen. No Signal Screen R C V H D U N Single Use this sub-menu to specify what should be projected when there is no input signal to the projector.
Input Settings Main Menu Setting Name COMPUTER 1 Terminal/ COMPUTER 2 Terminal Input RC Setting Unit N Single Description Use this sub-menu to specify manually the type of signal being input from the projector’s COMPUTER IN 1/COMPUTER IN 2 terminal. Auto*: Automatically detects the signal being input from the COMPUTER IN 1/COMPUTER IN 2 terminal and configures the appropriate input protocol. RGB: Select this option when a computer is connected to the COMPUTER IN 1/COMPUTER IN 2 terminal.
Option Settings 1 Main Menu Setting Name Input Setting Unit Auto Keystone R C V H D U N Single Correction N Source Specific Description Use this sub-menu to turn auto keystone correction on or off. On*: Select this option to turn on auto keystone correction. Off: Select this option to turn off auto keystone correction.
Setting Name Language Input Setting Unit R C V H D U N Single Description Use this sub-menu to specify the language to use for messages, setup menus, etc.
Setting Name High Altitude Input Setting Unit R C V H D U N Single Description Use this sub-menu to turn the high-altitude fan speed setting on or off in accordance with the altitude of the area where you are using the projector. On: Select this setting when using the projector in a high altitude (1,500 to 3,000 meters above sea level) area where air is thin. This setting increases cooling efficiency. Off*: Select this setting at normal altitudes (up to 1,500 meters).
Wired LAN Settings Main Menu (USB Port Models Only) Setting Name Remote on Input Setting Unit R C V H D U N Single Description Specifies whether the projector can be turned on via wired LAN while the projector is in standby (projector off with power being supplied). Enable: Power on enabled. Disable*: Power on disabled. Important! Performing an “Initialize Network Settings” operation or “Restore All Defaults” operation with the setup menu will cause this setting to change to “Disable”.
Operational Info Main Menu Setting Name Input Setting Unit Description Input Signal R C V H D U N Source Specific This sub-menu item shows the currently selected input signal (RGB, Component, Video, S-video, HDMI (PC), or HDMI (DTV)). “- - - -” is indicated here when there is no input signal. Signal Name RCV HDU Source Specific This sub-menu item shows the signal name of the signal being input to the projector. For details about signal names, see “Signal Name” under “Supported Signals” on page 52.
Cleaning the Projector Periodically clean the projector exterior, lens, intake vents, and intake-exhaust vents on a regular basis. Important! Before cleaning the projector, be sure to unplug it from the power outlet and make sure it is cooled down completely. Cleaning the Projector Exterior Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping.
Error Indicators and Warning Messages Warning messages and indicators let you know what the problem is when a projector error occurs. When an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug the AC power cord while the fan is still operating, an error may occur when you plug the AC power cord back in. Indicator/Error Message POWER : Green steady LIGHT : – TEMP : – Message : Internal temperature is too high. Check projector air vents for blockage.
Indicator/Error Message POWER : Green steady LIGHT : – TEMP : – Message : A system problem has occurred. Normal projection is not possible. POWER : Green steady LIGHT : – TEMP : – Message : There is some problem with the system. The audio function may not operate correctly. POWER : Green steady LIGHT : – TEMP : – Message : Some problem occurred with the USB port or LAN terminal.
Indicator/Error Message POWER : Amber flashing J Red steady LIGHT : – TEMP : Amber flashing (1-second interval) Message : – Description and Required Action Power has turned off automatically because the light source unit cover is open. Perform the following steps. 1 After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector. 2 Check to make sure that the light source unit cover is closed.
Appendix Connecting to a Video Device The projector is able to project images from the composite video output, S-video output, or component video output of a connected video device. Important! Always turn off the projector and the video device before connecting them.
Connection to a component video output Projector Video device Component video cable (commercially available) COMPUTER IN 1 terminal AUDIO IN 1 terminal To component video output terminals To AUDIO output terminals COMPUTER IN 2 terminal White Red AUDIO IN 2 terminal Stereo mini plug Ù Pin plug type audio cable (commercially available) z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr.
Connecting the HDMI Output of a Video Device or Computer to the Projector The projector supports projection and output of HDMI video and audio output from a computer or video device. Important! Turn off the projector and the computer or video device before connecting them.
Remote Controller Signal Range When performing an operation on the remote controller, point it at the remote control signal receiver on the back or front of the projector. The following illustration shows the range of the remote controller signal. ±30 degrees max. 5 meters (16.4 feet) max. ±30 degrees max. 5 meters (16.4 feet) max. Front Back 5 degrees to 30 degrees ±30 degrees max. 5 meters (16.4 feet) max. 5 meters (16.4 feet) max.
Hanging the Projector from a Ceiling The projector can be hung from a ceiling. When doing so, the projector should be turned upside down, and secured to the ceiling. You also need to install a safety wire to ensure that the projector cannot fall accidentally. To attach the safety wire, remove the sticker on the bottom of the projector and attach the wire there. For full details, contact the retailer where you purchased the projector.
Projection Distance and Screen Size h* The following table shows the relationship between the distance and projected image size. XJ-H1600/XJ-H1650 Projection Size XJ-ST145/XJ-ST155 Approximate Projection Distance Approximate Projection h* Distance (cm / inch) (m / feet) Diagonal (cm) 27 69 0.85/2.79 1.0/3.28 0 45 114 0.6/1.97 6/2.36 40 102 1.3/4.27 1.6/5.25 0 60 152 0.8/2.62 8/3.15 60 152 1.9/6.23 2.3/7.55 0 80 203 1.1/3.61 10/3.
Aspect Ratio Setting and Projection Image The following shows how images are projected in accordance with the type of the input signal and the aspect ratio setting of the projector.
Input source: Video, S-video, component or HDMI (DTV) Input Signal Normal 16:9 4:3 Aspect Image Squeezed Image Letter Box Image 51
Supported Signals Important! Even if a signal is listed in the table below, it does not guarantee that you will be able to display its images correctly. RGB Signal VESA Signal Name Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480/60 640 × 480 31.5 60 640 × 480/72 640 × 480 37.9 73 640 × 480/75 640 × 480 37.5 75 640 × 480/85 640 × 480 43.3 85 800 × 600/56 800 × 600 35.2 56 800 × 600/60 800 × 600 37.9 60 800 × 600/72 800 × 600 48.
Component Signal HDTV SDTV Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) 1080p/50 56.3 50 1080p/60 67.5 60 720p/50 37.5 50 720p/60 45.0 60 1080i/50 28.1 50 1080i/60 33.7 60 576p/50 31.3 50 576i/50 16.6 50 480p/60 31.5 60 480i/60 15.7 60 Video Signal, S-video Signal Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) NTSC 15.7 60 NTSC4.43 15.7 60 PAL 15.6 50 PAL-M 15.7 60 PAL-N 15.6 50 PAL60 15.7 60 SECAM 15.
HDMI Signal Signal Name Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480/60 31.5 60 800 × 600/60 37.9 60 1024 × 768/60 48.4 60 1280 × 768/60 47.8 60 1280 × 800/60 49.7 60 1280 × 960/60 60 60 1280 × 1024/60 64 60 1400 × 1050/60 65.3 60 SDTV (480p) 31.5 60 SDTV (576p) 31.25 50 HDTV (720p) (50) 37.5 50 HDTV (720p) (60) 45 60 HDTV (1080i) (50) 28.13 50 HDTV (1080i) (60) 33.75 60 HDTV (1080p) (50) 56.25 50 HDTV (1080p) (60) 67.
Using Wired LAN to Control the Projector (XJ-H1650, XJ-ST145, XJ-ST155) The projector can be controlled by a computer or other external device by connecting the device to the projector’s LAN port. Supported External Devices This projector supports all commands of PJLink Class1 (Version 1.00). http://pjlink.jbmia.or.jp/english/ This projector is supported by the commands of the Crestron Electronics controller and software (RoomView®). http://www.crestron.
2. Look up the projector’s IP address. z Perform the following steps to look up the projector’s current IP address. 1. Press the [MENU] key to display the setup menu. 2. Use the [T] and [S] keys to select “Wired LAN settings” and then press the [ENTER] key. 3. Use the [T] and [S] keys to select “Wired LAN info” and then press the [ENTER] key. 3. On the computer, start up a Web browser. 4. In the Web browser address bar, input the projector’s IP address and then press the [Enter] key.
To control the projector using the Wireless Presentation System control panel 1. Depending on the type of LAN connection you are using, perform either of the following operations to display the top page of the projector’s System Admin page.
Group Image Item Input Description Specifies the input source. The following are the available input source options. 3D Off 3D On Computer 1/2 (Auto) Computer 1/2 (RGB) Computer 1/2 (RGB) Video Computer 1/2 (Component) S-video Video S-video HDMI USB Audio 3D Puts the projector into the 3D input mode or normal input mode.
5. After all of the settings are the way you want, click “Logout”. Note The “Status”, “Setup”, “Change Password”, and “Restore Factory Defaults” items along the left side of the screen are mainly for accessing information and configuring settings related to projector wireless LAN connection. You can access these items when connected over a wired LAN as well. For details, see “System Admin Page Operations and Settings” in the “Wireless Function Guide” on the CD-ROM that comes with the projector.
Projector RS-232C Control You can use a commercially available serial cable (cross) to connect the projector to a computer and control the projector from the computer. Connecting the Projector to a Computer Connect the projector to the computer as shown in the illustration below.
z See the “Command List” for details about command names and settings. z All commands use ASCII characters and decimal format integers. z The projector will return a question mark (?) when it is sent a command it cannot recognize. Also, any command that attempts to set a value that is outside the applicable allowable range will be ignored.
Command Name RW Color Mode: Selects the color mode. PST RW 1: Graphics, 2: Theater, 3: Standard, 4: Blackboard, 5: Game Aspect Ratio: Specifies the aspect ratio. ARZ RW 0: Normal*1, 1: 16:9, 2: Normal*2, 4: Full Get Light Time: Gets the light time from the projector.
Specifications Model Name Brightness (ANSI Lumens) XJ-H1600 XJ-H1650 Projection Lens XJ-ST155 2500 3000 3500 Projection System DLP chip XJ-ST145 DLP Size: 0.7 inch, Number of Pixels: XGA (1024 × 768) 1.2X manual optical zoom, manual focus Light Source Manual focus Laser and LED Terminals COMPUTER IN: RGB 15-pin mini D-Sub × 2 (Also used as component signal input terminal.
MA1106-C
