User manual - HS-60W
Operation Guide HS-60W
2
USING THE STOPWATCH 2
LAP/SPLIT TIMES
Lap and split times are automatically stored in memory. There is enough memory to hold up to 99 lap/split time
records (01 to 99), plus the total elapsed time. The displayed lap number will flash when memory is full.
Pressing C while memory is full will display the current lap/split times along with the flashing lap number, without
storing them in memory.
Records can be recalled by pressing the R button.
0
a
(a)
b
(b)
c
(c)
START
1ST LAP 2ND LAP 3RD LAP
1ST SPLIT
(
a
)
2ND SPLIT
(
a+b
)
3RD SPLIT
(
a+b+c
)
STOP RESET
BUTTON
OPERATION
DISPLAY
MEASURE-
MENT
Recording the Finishing Times of Multiple Runners
After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the R button.
*
Recorded times are retained in memory until you start a new net elapsed time operation (by pressing
A
) after
clearing the stopwatch screen to all zeros (by pressing
C
).
Example : To record the times of 10 different runners.
START 1ST RUNNER
FINISHES
2ND RUNNER
FINISHES
9TH RUNNER
FINISHES
10TH RUNNER
FINISHES
BUTTON
OPERATION
DISPLAY
Difference between this runner’s time
and the previous runner’s time
You can scroll through records in memory by pressing , even while the stopwatch is still
running.
Press .
Runner’s finishing position
Runner’s time
MEASURE-
MENT
SETTING TIME AND DATE
1)While the TIME screen is displayed, hold down C for a few seconds to
display the setting screen.
2)Press A to reset seconds count to 00.
3)Press C to move flashing between settings.
SECONDS HOUR MINUTES YEAR
MONTHDAYDAY OF THE WEEK
4)Press A to change (+) selected setting. Hold down A to change at high
speed.
5)To exit the setting screen, press B at any time or C while the day of the
week setting is flashing.
*
Year setting is possible up to 2099.
Auto Return
The setting screen automatically returns to the TIME screen if you do not perform any operation for a few minutes.
CARE OF YOUR STOPWATCH
• This stopwatch is water resistant up to five bars (atmospheres), which means you can use it in the rain or in
areas where splashing water is present. Never operate the buttons of the stopwatch while it is immersed in water.
• You should have the rubber seal that keeps out water and dust replaced every 2 to 3 years.
• Should moisture appear inside the stopwatch, have it checked immediately by your retailer or a CASIO
distributor.