Owner's Manual

119
Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4) only. Use
the standard USB driver that comes with your supported operating system.
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Macintosh
When you want to do
this:
Operating
System
Version
Install this software:
See
page:
Save images to your
Macintosh and view
them there manually
Mac OS 9
Installation not required. 119
Mac OS X
Save images to your
Macintosh automatically/
Manage images
Mac OS 9
Use commercially available
software.
121
Mac OS X
Use iPhoto, which comes bundled
with your operating system.
Play movies
Mac OS 9 Playback not supported. 122
Mac OS X
Movie file playback is supported
under OS X v10.3.9 or higher when
QuickTime 7 or higher is installed.
122
Connecting the Camera to Your Computer and Saving Files