CASIO DT-X30 Series Windows Mobile OS Software Manual (Version 1.00) CASIO Computer Co., Ltd. Copyright ©2009. All rights reserved.
Table of the Contents Chapter 1. 1.1 1.2 Chapter 2. 2.1 2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 2.1.7 2.1.8 2.1.9 2.1.10 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.2.7 2.3 2.3.1 2.3.2 2.3.3 2.3.4 2.3.5 2.4 2.4.1 2.4.2 2.4.3 2.5 2.5.1 2.5.2 2.5.3 2.6 2.6.1 2.6.2 2.7 2.7.1 2.7.2 2.7.3 Editorial Record Preview Product Overview Model by Feature Available Options Functions Basic Specifications Windows Mobile 6.
2.7.4 2.7.5 2.7.6 2.7.7 2.7.8 2.7.9 2.7.10 2.7.11 2.8 2.8.1 2.8.2 2.8.3 2.8.4 2.8.5 2.8.6 2.9 2.9.1 2.9.2 2.10 2.10.1 2.10.2 2.11 2.11.1 2.11.2 2.11.3 2.11.4 2.11.5 2.11.6 2.11.7 2.11.8 2.11.9 2.11.10 2.12 2.12.1 2.12.2 2.12.3 Chapter 3. 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.
3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.31.1 3.31.2 3.31.3 3.31.4 3.31.5 3.31.6 3.32 3.33 3.34 3.35 3.36 3.37 3.38 3.39 3.40 Chapter 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.
4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 Chapter 5. 5.1 5.2 5.3 5.4 5.5 Chapter 6. 6.1 6.2 6.3 6.
Editorial Record Manual Version no. 1.
Preview The features and specifications described in this reference manual give you an overview of the functional detail of the DT-X30 series handheld terminals with the integrated Windows Mobile® Version 6.1 OS. For DT-X30 series handheld terminals with the integrated Windows® CE OS, see DT-X30 Software Manual available separately.
1. Product Overview 1.1 Model by Feature The major features integrated in each model of the DT-X30 series are shown below. Table 1.1 Model no. OS (Note 1) Scan Engine WLAN (802.
1.2 Available Options The following dedicated options are available for DT-X30 series. Table 1.2 Option Cradle Battery Battery charger Product USB Cradle Ethernet Cradle Battery Pack Dual Battery Charger Cradle-type Battery Charger Car Mounted-type Battery Charger Model no.
2. Functions This chapter describes about detailed specifications of the functions implemented in the terminal and the options. 2.1 Basic Specifications This chapter describes about basic specifications of the terminal. 2.1.1 Windows Mobile 6.1 The terminal integrates Microsoft® Windows Mobile® Version 6.1 as its operating system. The operating system features with the following capabilities. • • • • • • • • • Easy-to-use user interface Improvement of kernel (note) Large file size (4GB) is supported.
2.1.2 Display Basic Specifications The QVGA (320 x 240 dots) mode is supported by the terminal. Table 2.1 Display specification Display size X direction Y direction 65,536 colors 2-way TFT LCD* (16 bpp, Red: 5 bits, Green: 6 bits, Blue: 5 bits) 240 dots 320 dots * Dead Pixels The LCD panel employed in this product uses high precision and substantial number of components which commonly cause a small number of the pixels not to light or to remain lit all the time.
Backlight Auto Dimming The Control Panel can be used to set up whether or not the Auto Dimming function is used and the waiting time until when dimming begins. Auto dimming is set effect only when the power is provided by the lithium-ion battery pack. It will not function when an external power supply is used.
2.1.3 Touch Panel An input can be made into any portion of the screen on the touch panel. The touch panel has the following resolutions. Table 2.2 Resolution X direction Y direction 240 dots 320 dots • Capturing touch coordinates in X and Y directions and controlling the pointing are possible by application. Prior to using the touch panel for the first time, calibrating the touch panel is required. Tap Sound The Control Panel can be used to set up the tap sound to mute, low or loud.
2.1.4 Keys Keyboard Layout The following is the keyboard layout employed in the terminal. Figure 2.
Key Assignments The following are the key codes and function assignments. Table 2.3 KEY Control keys Input mode ---- Fn Character input mode CLR Function mode Character input mode Function mode Character input mode ↑ Function mode Character input mode ↓ Function mode Character input mode ← Function mode Character input mode → Function mode 1 A Operation Specialized key operation (toggle). Specialized key operation (toggle). a Specialized key operation (toggle).
Table 2.4 KEY F1 Function keys Input mode Character input mode F2 Function mode Character input mode F3 Function mode Character input mode F4 Function mode Character input mode F5 Function mode Character input mode F6 Function mode Character input mode F7 Function mode Character input mode F8 Function mode Character input mode Function mode 1 A a F 1 A a F 1 A a F 1 A a F 1 A a F 1 A a F 1 A a F 1 A a F Operation Performs as F1 key. Performs as F1 key. Performs as F1 key.
Table 2.5 Trigger keys KEY Input mode R Trigger Character input mode L Trigger Trigger Center Function mode Character input mode Function mode Character input mode Function mode Table 2.
7 8 9 . (Decimal point) Character input mode Function mode Character input mode Function mode Character input mode Function mode Character input mode Function mode 1 A a F 1 A a F 1 A A F 1 A a F Performs as 7 key. Performs as “P”, ”Q”, ”R” and ”S” keys. Performs as “p”, ”q”, ”r” and ”s” keys. Start the application. Performs as 8 key. Performs as “T”, ”U” and ”V” keys. Performs as “t”, ”u” and ”v” keys. Start the application. Performs as 9 key. Performs as “W”, ”X”, ”Y” and ”Z” keys.
Enabling or Disabling Fn Key For keys that perform specialized operations while the key input mode has been set to Function mode, “Enable” or “Disable” can be set on each individual key in the registry below to control the operations. [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD] Or, using the SysSetFnKeyOperation function of the System Library can achieve the same control operation explained above. Table 2.
Permit or Prohibit Key Locks The System Library can be used to permit or prohibit the operations of keys except for the Power and Trigger keys. The functions of the System Library relevant to the “Permit or Prohibit Key Locks” are as follows. SysSetAllKeyLock : Sets up “Enable” or “Disable” for lock with specified key. SysGetAllKeyLock : Retrieves “Enable” or “Disable” status for lock with specified key.
2.1.5 Audio Basic Specifications WAV playback, voice recording and playback are supported. By using the Microsoft SoftwareMixer function, output sounds from multiple applications can be mixed and output (in 44.1 KHz, 16-bit stereo mixing). Voice Recorder is integrated in the terminal as the sound system application to make it possible to perform WAV file streaming playback and local file playback in HTTP.
2.1.6 Buzzer Sounds Basic Specifications The buzzer sound in various modes such as scanning confirmation, alarm, warning, and other available sounds can be output via the integrated speaker. The sounds have four attributes and default values. Table 2.
2.1.7 Memory Management The high speed and large capacity RAM (MobileDDR 128MB) and FlashDisk (NAND Flash 128MB) are integrated in the terminal. Although RAM has been used for RAM XIP (for OS), program memory (for program files) and object store (for work area) in the past, it is unified presently to integrate FlashDisk on root folder.
RAM RAM XIP Program Memory Execute OS files deployed on RAM OS Work Execute Program CAMERA Buffer DrvGlob Buffer The integrated RAM has a total capacity of 128 MB and is used for the below purposes. Driver glob and buffer : Work area for driver and so on. OS area : Area to carry out deployed OS. Program memory : Memory area to carry out program and for the OS work area. Figure 2.4 • The DriverGlob is allocated for the work area of drivers.
2.1.8 Reset The role of the boot loader in Windows Mobile (OAL) (see Figure 2.6) is to boot the OS after initializing the hardware. On the terminal, it is possible to carry out the inspection tool and OS update tool with special key operation as described in the respective figures below. BootSelector (Soft reset (Default)) (Fn+5+Reset) (Fn+CLR+PWR+Reset) (Fn+CLR+RESET) (Fn+CLR+”.
User Disk Clear This operation is carried out if Fn and CLR and “.” keys are held down at the same time and then the reset switch is pressed for a period of one second or longer while the terminal is in operation. A message (see Figure 2.7) to confirm memory initialization appears. The R Trigger key is used to confirm the User Disk Clear. Figure 2.7 After the R Trigger key is pressed twice, User disk is formatted and RAM are initialized to the factory condition (see note). Figure 2.
Power-on Reset After the battery pack and memory backup battery are demounted and then put back into the terminal, this state occurs when the Power switch is turned on for the first time. When the Power switch is turned on in this state, the Boot Loader performs the reset (RTC is initialized if it is necessary). Table 2.
2.1.9 Memory Corruption Check To confirm checksum is carried out in order to detect whether the OS deployed in the memory is corrupted or not, and the OS is reloaded if it is necessary. Table 2.13 On Soft Reset Confirm the checksum Carried out On OS Clear, Reload, Hard Reset, User Disk and Power-on Reset On Suspend and Resume - OS load Carried out when error of check-sum occurs.
2.1.10 LED Basic Specifications There are two LEDs integrated in the terminal, one on the right side for the user notifications and the other for charging the battery complete notification. Table 2.14 LED Right side LED Left side LED Color Red Green Blue Orange Cyan Magenta Orange Green Red Description User notification (alarm), scanning a bar code Scanning a bar code Connection established via Bluetooth Connection established via WLAN, WWAN or GPS User defined User defined While charging battery pack.
Bluetooth Connection Status This is used for notification of Bluetooth connection establishment status which is controlled with the System Library. Table 2.17 Operation mode Specification Bluetooth established ON in blue for 1 second, OFF for 2 seconds Note: Indication for scanning a bar code has the priority over other indications. Attribute L_BT WLAN Connection Status This is used for notification of WLAN connection establishment status which is controlled with the System Library. Table 2.
WWAN Connection Status This is used for notification of WWAN connection establishment status. Table 2.20 Operation mode Specification Attribute WWAN established ON in orange for 1 second, OFF for 2 seconds L_WWAN Notes: • Indication for scanning a bar code has the priority over other indications. • User access is supported by the System Library (CLBSetIndicator function). • The color of indications for WLAN, WWAN and GPS is the same.
2.2 Laser Scanner This chapter describes about detailed specifications of the integrated Laser Scanner (model dependant). 2.2.1 Basic Specifications The following industrial standard bar code symbologies are supported by the integrated Laser Scanner. Table 2.22 Supported symbologies Symbology Check Digit Calculation No. of min. digits 8 (fixed) 10 (fixed) 7 (fixed) 9 (fixed) 2 (Note 3) 2 (Note 4) 4 (Note 5) 2 1 1 1 1 (Note 6) 14 (fixed) 14 (fixed) 1 14 (fixed) 1 No. of max.
6. Minimum digit on NW7 symbology The no. of minimum digits can be set to one digit only when scanning NW7 symbology is enabled. 7. Minimum digit on Interleaved 2of5 symbology The no. of minimum digits can be set to two digits only when scanning Interleaved 2of5 symbology is enabled. 8. Minimum and maximum digits on IATA symbology The no.
2.2.2 Scanning Method The Laser Scanner has “scanning state” (emits laser beam to read a bar code) and “standby state” (scanning is halted and in standby state). These two states are controlled to start scanning bar code and stop the scanning. Table 2.23 Scanning methods Scan method Single scan Continuous scan (controlled with Trigger key) Continuous scanning (controlled by program) Description Conditions for scanning to end Press Trigger key to start scanning.
The functions of the Laser Scanner Library relevant to the Scanning Method are as follows. OBRStartScanning : Emits laser beam and start scanning a bar code. OBRStopScanning : Stops emitting laser beam and scanning a bar code. OBRSetScanningType : Sets up scanning mode. OBRGetScanningType : Retrieves the scanning mode. OBRClose : Sets up scanning disable status. OBRSetScanningCounter : Sets up the no. of times for continuous scanning. OBRGetScanningCounter : Retrieves the no.
2.2.3 Scanning Parameters Conditions that allow scanning a symbology in a specific mode can be set for each readable symbology. Readable Symbology Bar code symbologies that are enabled or disabled for scanning can be specified. If only specific symbologies are to be scanned, set “Enable” for scanning on these symbologies only and “Disable” on the other symbologies. This educes decode processing time and lowers the error rate. The default is “Enable scanning on all the symbologies”. Readable Digits The no.
The functions of the Laser Scanner Library relevant to the Scanning Parameters are as follows. OBRSetScanningCode : Sets up scanning with individual bar code symbology. OBRGetScanningCode : Retrieves scanning status with individual bar code symbology. OBRSetCode39Option : Sets up scanning with Code39 symbology. OBRGetCode39Option : Retrieves decode options of Code39 symbology. OBRSetNW7Option : Sets up scanning with NW-7 symbology. OBRSetNW7OptionEx : Sets up scanning with NW-7 symbology.
: Retrieves decode options of RSS Expanded symbology. OBRSetRSS14StackedOption : Sets up scanning with RSS-14 Stacked symbology. OBRGetRSS14StackedOption : Retrieves decode options of RSS-14 Stacked symbology. OBRSetRSSExpandedStackedOption : Sets up scanning with RSS Expanded Stacked symbology. OBRGetRSSExpandedStackedOption : Retrieves decode options of RSS Expanded Stacked symbology.
2.2.4 Scanning Output Format Formats for outputting results of scanned bar codes can be set. Table 2.25 Output Formats No. of Symbology Standard digits WPC JAN-13 13 EAN-13 13 JAN-8 8 EAN-8 8 JAN-13 15 addon+2 EAN-13 15 addon+2 JAN-13 18 addon+5 EAN-13 18 addon+5 JAN-8 10 addon+2 EAN-8 10 addon+2 JAN-8 13 addon+5 EAN-8 13 addon+5 UPC-A 12 UPC-B 12 UPC-A 14 addon+2 UPC-B 14 addon+2 UPC-A 17 addon+5 UPC-B 17 addon+5 UPC-A 12 UPC-A 14 addon+2 UPC-A 17 addon+5 JAN-13 14 EAN-13 14 JAN-8 14 EAN-8 14 Continue.
UPC-E (note 1) UPC-A UPC-E Interleaved 2of5 14 (7)/8 (7)/8 (7)/8 (7)/8 (6)/7 (6)/7 (6)/7 (6)/7 14 14 14 14 (9)/10 (9)/10 (9)/10 (9)/10 (8)/9 (8)/9 (8)/9 (8)/9 (12)/13 (12)/13 (12)/13 (12)/13 (11)/12 (11)/12 (11)/12 (11)/12 3 to Max 3 to Max 1 to Max 1 to Max 3 to Max 1 to Max 2 to Max 00SMMMMMNNNNNCT 0MMNNNMCT 0MMMNN3CT 0MMMMN4CT 0MMMMMNCT MMNNNMCT MMMNN3CT MMMMN4CT MMMMMNCT 0000000MMNNNMCT 0000000MMMNN3CT 0000000MMMMN4CT 0000000MMMMMNCT 0MMNNNMCAAT 0MMMNN3CAAT 0MMMMN4CAAT 0MMMMMNCAAT MMNNNMCAAT MMMNN3C
Code93 1 to Max AAA ------ AAAT MSI 1 to Max 1 to Max 1 to Max 1 to Max 1 to Max 1to Max 1 to Max AAA ------ AAAT SBBB ----- BBCST AAA ------- AAAT SBBB ------ BBCST FAAA ------ AAAT GAAA ------ AAAT DDD ------ DDCCT IATA 1 to Max 16 14 16 14 1 to74 1 to 41 16 14 1 to74 DDDDDDDDDD --------- CT PADDDDDDDDDDDDDDCT 01DDDDDDDDDDDDDCT DDDDDDDDDDDDDCT 01DDDDDDDDDDDDDCT DDDDDDDDDDDDDCT DD ---- DDDT AA ---- AAAT 01DDDDDDDDDDDDDCT DDDDDDDDDDDDDCT DD ---- DDDT 1 to 41 AA ---- AAAT Code128 Code128 EAN128 (
Table 2.27 Code39 symbology A ASCII conversion post data B ASCII conversion pre-data C Mod43 check digit. Becomes data if there is no check digit attached. S Start and stop characters Table 2.28 NW7 symbology S Start and stop characters (any one of a, b, c and d) D Data C Mod16 check digit. Becomes data if there is no check digit attached. Table 2.29 Interleaved 2of5 symbology D Data C Mod10 check digit. Becomes data if there is no check digit attached. Table 2.
Table 2.36 RSS-14 symbology D Numeric data C Mod10 check digit Table 2.37 RSS Limited symbology D Numeric data C Mod10 check digit Table 2.38 RSS Expanded symbology D Numeric data A Alphabet data The functions of the Laser Scanner Library relevant to the “Scanning Output Formats” are those listed on page 39. See page 39. Termination Codes Choose one of the following five termination codes to attach to the end of decoded data.
Output Buffer The scanner scans a bar code and outputs the scanned data using one of the following methods described in the table. Table 2.39 Output Method OBR buffer output (see note) - Key message output - Clipboard output - Keyboard output - Description Scanned data is output to memory in the Laser Scanner driver. Scanned data already output to the memory can be captured using the Laser Scanner Library. Scanned data can be output with the window message to the specified window handle.
Conditions for Terminating Scanning Scanning is terminated when any one of the following conditions is met. • Scanning is succeeded. • Preset timeout period has elapsed. • OBR buffer becomes a full. • An abnormal condition is detected in the scan module. Scan Completion Notification When scanning is complete, a notification is issued to the application using one of the methods described in the table. Each notification method can be set to either “Enable” or “Disable”.
Capturing Event Factors When a notification for scanning completion is issued with “Event”, factors which made the scanning succeeded are automatically recorded. The recorded factors are also retrieved using the Laser Scanner Library. The function of the Laser Scanner Library relevant to the “Capturing Event Factors” is as follows. OBRGetLastEventStatus : Retrieves last event status.
2.2.5 Scan Result Notification When scanning a bar code is complete, a notification about the scanning result can be indicated to the user via either LED or buzzer. Each indication method can be set to “Enable” or “Disable”. Table 2.
2.2.6 Expanded Features Scan Width Control If the laser emits on several bar codes located near each other, scanning may fail. By narrowing the laser beam emission width, scanning can be focused onto only one bar code, not onto the other one located near by. The laser beam emission width can be set to one of the four modes as shown in following figure. The Laser Scanner Library can be used to set it. The default is “No control on laser beam emission width”.
Scan Verification Beam If scanning takes place with the laser beam emitted onto multiple bar codes located near each other, it is difficult to distinguish by the user which bar code was correctly scanned. In such the condition, if a laser beam can be emitted again on to the same bar code verifying the actual scanned bar code the user wishes to scan and a notification about it is issued to the user, the scanning can be succeeded without having any difficulty or confusion.
Noise Filter If the background of a bar code is white color, a noise tends to be generated easily during scanning causing the error rate to increase. To reduce such the noise, the Noise Filter function is available with the terminal. Two methods, software noise filter and ASIC noise filter, are available. However, the ASIC noise filter has been set always effect by the system. Thus, it is not possible for the user to reset it in the Read operation tab of Setting Scanner. Table 2.
Setting Gain The laser module gain setting, Mode 0 to Mode 3, can be selected. Selecting an optimum gain mode enhances scanning performance especially for bar code distanced far away from the terminal and bar code printed in high-resolution (“PCS”). Table 2.45 Gain Mode Mode 0 Mode 1 Mode 2 Mode 3 Description Standard mode This mode generates ordinary scanning performance for bar codes with various printing qualities and in various scanning conditions.
Configuration File The various setting values can be stored in a file and resumed. The setting file storage location and its name are “\Documents and Settings\System Settings\OBRDRV.ini”. If there is no such the setting file, the default values are used to initiate the scanning. Table 2.46 Symbol ogy Parameter READCODE Description Range Default Enable or disable 1 131071 scanning the symbologies.
CODE39_CHKD Check digit calculation 0 0 1 CODE39_CHKCH Check character output 0 1 1 NW7_MIN Valid minimum digits 2 2 NW7_MAX Valid maximum digits 63 63 NW7_OUTFORMAT Output format 0 0 0: Disable 1: Enable 0: Disable 1: Enable 0: Output NW7 bar code NW 7 Option with start and stop characters. 1 1: Output NW7 bar code without start and stop characters.
UPCEADDON_CHKD UPCEADDON_CHKCH Check digit calculation 1 Check character output 1 0: Disable 1: Enable 0: Disable 1: Enable UPCE_MIN Valid minimum digits 7 7 Fixed UPCE_MAX Valid maximum digits 7 7 Fixed UPCE_OUTFORMAT Output format 0 0 0: Output UPC-E bar code with “0” UPC-E Option at the forefront. 1 1: Output UPC-E bar code without 2 2: Output UPC-E bar code in GTIN “0” at the forefront. format.
CODE128_MIN Valid minimum digits 1 2 CODE128_MAX Valid maximum digits 98 98 0 0 CODE128_OUTFORMAT Output format 0: (note 4) Output Code128 bar code after Full ASCII conversion. 1 1: Output Code128 bar code without Full ASCII conversion performed. 2 2: Output EAN128 bar code only (note 6). 6 6: Output EAN128 bar code only (note 6) with code ID (note 2). 10 10: Output EAN128 bar code only (note 6) after Fnc→ GS conversion. 2 2: Output EAN128 bar code only (note 6).
MSI Option MSI_MIN Valid minimum digits 1 1 MSI_MAX Valid maximum digits 57 57 MSI_OUTFORMAT Output format 0 0 MSI_CHKD Check digit calculation 0 1 MSI_CHKCH Check character output 0: No calculation 1 1: 1 digit, mod 10 2 2: 2 digits, mod11/mod 10 3 3: 2 digits, mod10/mod10 0: Disable 1: Enable 0 1 1 IATA_MIN Valid minimum digits 1 4 IATA_MAX Valid maximum digits 65 65 IATA_OUTFORMAT Output format 0 0 IATA_CHKD Check digit calculation 0 0 1 IATA Option N
Valid minimum digits 14 14 Fixed RSS14_MAX Valid maximum digits 14 14 Fixed RSS14_OUTFORMAT Output format 0 0 0: Option RSS-14 Stacked RSS14_MIN standard format. 1 RSS Expanded 1 Enable (fixed) Enable (fixed) Check character output 1 1 RSSEXP_MIN Valid minimum digits 1 to 74 1 RSSEXP_MAX Valid maximum digits 1 to 74 74 RSSEXP_OUTFORMAT Output format 0 0 Output RSS Expanded Stacked bar code in no format (fixed).
Option Option Multi-step Read Option Counter Comp Read Counter MULTISTEP Multi-step reading 0 0 1 CMPCNT No. of verifications 1 to 9 3 READCNT No.
Setting correction value 0 of thickness of bars 0 0: No correction 1 1: Thin black bar 2 2: Thin black bar (or Option thicken black bar) 3 3: Thin white bar 4 4: Thin white bar (or thicken white bar) MARGINCHECK Option Decode Learning Decode Customize BARWIDTH LEARINING Setting threshold values 0 for right and left margins Setting learning mode 0: Maximum 1 1: Middle 2 2: Narrow 3 3: Minimum 0: Disable 1: Enable 0 1 0 0 Notes: 1.
Dual Decoders System The dual decoders system initially decodes a scanned bar code data using the standard decoder, but if decoding fails, it uses the following additional decoder to scan the same bar code. This dual decoders system supports the bar code symbologies listed below.
Changing the threshold values for Right and Left margins When a bar code is printed inside of quadrangle, scanning may not be possible because there is not enough left and/or right marginal space. By making change on the right and left marginal threshold values, scanning a bar code becomes possible. See the table below. Table 2.48 When the left marginal space is narrow. When the right marginal space is narrow. When both right and left marginal spaces are narrow.
Decoder Learning function This function is to automatically change parameters for criteria and threshold level used to judge on decoding bar code data so that scanning a bar code printed in poor quality can be improved. However, after changing the relevant parameters for the Decoder Learning function, the individual scanning characteristics of each terminal may be degraded.
Supported Symbologies Below is a list of the symbologies which can be effectively scanned using the Decoder Learning function.
List of Parameters Subject to Change The parameters subject to change are those which can be altered using the Customize function and those listed below. Table 2.49 Customizing the elements Element Description Changing Character Spacing Enables the threshold values of the bars forming the character Threshold Values spacing (the white space between characters formed by multiple black and white bars) to be responsively modified.
Changing Character Spacing Threshold Values The decoder identifies wide character spacing as an anomalous pattern, which may result in the inability to scan. Disabling the character spacing determination function overcomes this problem. Depending on the barcode system, some codes may have character spacing while others may not. This change is effective for those codes which have character spacing. The symbologies on which this change is effective are listed below.
Changing Thick Bar Determination Criteria Optical and print characteristics may result in discrepancies in the thickness of black and white bars, thereby preventing accurate ratios from being obtained during scanning. By checking the left guard bar and central bar, the black and white bar discrepancies are obtained and incorporated into the thick bar determination. Changing the position of the bars to be checked can enhance the scanning accuracy of bar codes which contain some bars with anomalous ratios.
Changing Character Discrepancy Threshold Values When a comparison of the total value of bars comprising each character is performed during scanning and said value is either too large or too small compared to that of the other characters, it is processed as an anomalous pattern. This may result in the inability to scan due to the ratio of a single character becoming either larger or smaller than the others. This problem can be overcome by disabling the character discrepancy check.
Enabling or Disabling the Decoder Learning function The Decoder Learning function can be switched to either “Enable” or “Disable”. This switch can be made using the functions or settings file provided by the Laser Scanner Library. Note: Enabling the Decoder Learning function improves the scanning performance for poorly printed bar codes. However, it may also increase the likelihood of erroneous scanning depending on the bar code you scan.
2.3 CMOS Imager This chapter describes about detailed specifications of the CMOS Imager which is model dependant. See Table 1.1. 2.3.1 Basic Specifications The following industrial standard 1D symbologies are supported by the integrated CMOS Imager. Table 2.
Table 2.
2.3.2 Scanning Method Multi-step Read This function continuously performs decoding as long as one of the R/L Trigger keys is held down. Once bar codes are decoded they are not read any more. This function is useful for reading all bar codes without repeating the same action when more than one bar code is printed on one slip. Package Read This function outputs the read result retrieved from more than one bar code in a package.
The functions of the Imager Library relevant to the Scanning Method are as follows. IMGSetDecodeMode : Sets up scanning mode. IMGGetDecodeMode : Retrieves the scanning mode. IMGWaitForDecode : Carries out decoding symbol. IMGWaitForDecodeRaw : Carries out decoding symbol including its binary data.
2.3.3 Scanning Parameters Condition that allows scanning a symbology in specific modes can be set for each readable symbology. Readable Symbology Bar code symbologies that are enabled or disabled for scanning can be specified. If only specific symbologies are to be scanned, set “Enable” for scanning on these symbologies only and “Disable” on the other symbologies. This reduces decode processing time and lowers the error rate. The default is “Enable scanning on all the symbologies”. Readable Digits The no.
IMGSetIATA IMGGetIATA IMGSetITF IMGGetITF IMGSetISBT IMGGetISBT IMGSetMaxicode IMGGetMaxicode IMGSetMicroPDF IMGGetMicroPDF IMGSetMSI IMGGetMSI IMGSetPDF417 IMGGetPDF417 IMGSetQR IMGGetQR IMGSetRSS IMGGetRSS IMGSetTLC39 IMGGetTLC39 IMGSetUPCA IMGGetUPCA IMGSetUPCE IMGGetUPCE : : : : : : : : : : : : : : : : : : : : : : : : Sets up decode options for IATA 2of5 symbology. Retrieves the decode options for IATA 2of5 symbology. Sets up decode options for Interleaved 2of5 symbology.
2.3.4 Scan Result Notification The notification of the read completion of a symbol can be posted using one of the following two integrated devices. The buzzer sound level can be set up at the Control Panel. Table 2.
2.3.5 Expanded Features Decoder Customize function This function adjusts the scanning speed to facilitate scanning of hard-to-read symbols. Decoder Deliberation Levels The level of deliberation with which symbols are scanned can be set at five different levels. Setting the level to Very Quick or Quick limits symbols which can be decoded, but increases the decoding speed. Alternatively, setting the level to Deliberate of Very Deliberate allows many symbols to be read but slows down the decoding speed.
Complementary Scanning functions Automatic Linking of Combined Symbols The CMOS Imager provides support for combining symbols. When scanning the following combined symbols, the scanned data is stored in the internal buffer and all of the data from combined symbols or all scanned symbols is combined and output. Combined symbols can only be scanned when the decoding mode is set to “Normal Scan”. Note that combined symbols cannot be scanned in “Multi-step Scan” and “Package Scan” modes. Table 2.
Image Capture Function This function is used to capture image data and save it as JPEG file. Using the function together with the JPEG Library, the captured image data is output as image data in either 2-gray scale or 256-gray scale. The captured image data can also be output in low resolution by reducing its size. The following table shows the reductions and sizes. Table 2.
Signature Index Function This function scans both symbol and signature at one time and outputs the symbol data and indexed signature at the same time. The position and size of a signature can be specified in the user application based on the position of the symbol. The function automatically corrects the up and down positions of the captured symbol in correspondence with the up and down positions of the image data even if it has been captured upside down or diagonally, and then outputs it. Figure 2.
Streaming Display Function This function sequentially displays an image while continuously operating the CMOS Imager. With the image capturing function in “Image Capture Function”, the streaming display function can be used to display image preview. Table 2.58 Reduction Size 1/1 reduction 1/1, 1/2, 1/4 188 x 120 pixels 1/2 reduction 1/4 reduction Partial extraction is possible.
Imager’s APO This function will shut down the power to the CMOS Imager automatically if it has not been used for a while. After activating the APO (Automatic Power OFF) function, the imager’s power can be turned on again if one of the following functions is invoked. The time period of the APO function can be set up in the range of 0 to 1,800 seconds. Specifying “0” will disable it. The power consumption by the imager can be curbed while the APO function is activating.
Setting for Scanning Bar Codes For each symbology, parameters that can define the scanning performances are specified with its individual symbology name in the section name (see Table 2.59). Table 2.
Setting for Common Operations The settings in Table 2.60 are for the common operations not related to scanning bar codes. Table 2.60 Item [PrintWeight] Section PrintWeight [Intensity] Section Aimer Illumination [Multi-step] Section ReadMode ReadTimes Separator Description Setting Specify the calibration value for thickness of bars. Specify in the range of 1 to 7. 4 Specify the intensity of the Aimer. Specify of the intensity of the Illumination LED. Specify 0 or 100. Specify 0 or 100.
[Auto Power OFF] Section Auto Power OFF [Indicator] Section LED Buzzer Imager’s APO timer Specify in the range of 0 to 1800 (in second), “0” disables APO, “1 to 1800” turns off the power to the Imager after the time period has elapsed. 60 Specify turning on the LED when scanning is complete. 0; disable, 1; enable in green, 2; enable “success” in green and “failure” in red 0; disable, 1; enable 2 Specify turning on the buzzer when scanning is complete.
2.4 Digital Camera This chapter describes about detailed software specifications of the integrated digital camera (model dependant). The camera driver integrated in the DT-X30 series handheld terminals is compatible with the Windows Driver Model (WDM) of Microsoft. Application program runs on the terminal can utilize the camera functions by controlling DirectShow API. Note that the Camera Library developed by Casio is not operable on the Windows Mobile models.
2.4.1 Basic Specifications The terminal (model dependant) offers the following functions via the integrated digital camera module. Table 2.61 Item Recorded image file format (Still image capture/consecutive shooting) Size of captured still images Setting Parameter JPEG Mode UXGA Quad-VGA XGA SVGA VGA 1/4VGA Finder (preview) display Mode 1/4VGA Portrait Width Height 1200 1600 960 1280 768 1024 600 800 480 640 240 320 Portrait Width Height 240 320 Frame rate 15.
2.4.2 Capturing Images Capture Static Image and Save in File This function captures single static image and then outputs it in BMP or JPEG format file. Table 2.
Digital Zoom The digital zoom is a function used to cut out a part of image from the high-resolution image. The following image sizes and magnifications can be used for digital zoom shooting. Table 2.64 Digital Zoom Magnification 1/4VGA VGA SVGA XGA Quad-VGA UXGA x 1.5 Yes Yes Yes Yes No No x 2.0 Yes Yes Yes No No No Note: If shooting is performed in one of the modes marked as “No” in the table, shooting is made without digital zoom (“x 1.0”) effect.
Brightness Correction This is for correcting the brightness. “Brightness” referred to in this explanation is the target value for automatic exposure. Exposure is determined automatically in accordance with the brightness of the object, but a target value if you wish to set also can be set in the range of -6000 (dark) to 6000 (bright). The default is 0. Setting the properties of the DirectShow relevant to the Brightness Correction is as follows.
Flash The LED flash can be used when capturing still images. The LED flash has two modes: Flash Off (default) and Flash On. Table 2.66 Item LED Flash Setting Parameter Flash Off (default), Flash On Setting the property of the DirectShow relevant to the Flash is as follows. Set(CameraControl_Flash, SetValue, CameraControl_Flags_Manual) Values to set are as follows. 0 : Flash Off 1 : Flash On Compulsory Shutter Sound The shutter sound is generated by the audio during shooting photos.
Focus Adjustment The CMOS digital camera comes with a focus adjustment function to enable the operator to capture focused images. This adjustment comes in the form of a fixed-focus switch and an autofocus feature. The fixed-focus switch enables the application program to switch the focus to suit the distance to the object being captured. The autofocus feature automatically adjusts the focus to suit the distance of an object being captured.
2.4.3 Image Process This can allow the operator to specify the quality (compression ratio) of an image in JPEG. Setting the JPEG compression ratio of the DirectShow is as follows. SetQuality(SetValue) Values to set are as follows.
2.5 USB This chapter describes about detailed specifications of the USB. 2.5.1 Basic Specifications Switching USB • Switches between USB Client (USB Function) and USB Host. • Switching between USB Client (USB Function) and USB Host is carried out by a signal from the cradle. This cannot be performed in application. • Switching is not possible while a USB device is connected to the cradle and the terminal is recognizing the USB device. Switching can be performed once the USB device is disconnected.
2.5.2 COM Port COM ports used with the USB are as follows. Table 2.69 USB Function USB-MODEM COM2 COM5 2.5.3 Product ID USB product ID is as follows. Table 2.
2.6 IrDA This chapter describes about detailed specifications of the IrDA. 2.6.1 Communication Speeds The IrDA supports the following physical communication speeds. Table 2.71 Via SIR FIR IrDA protocol 9600, 19.2K, 38.4K, 57.6K, 115.2K bps 4M bps RAW IR 9600, 19.2K, 38.4K, 57.6K, 115.2K bps Notes: • A speed of communication via IrDA protocol is automatically determined by negotiation with the partner device.
2.7 Bluetooth This chapter describes about detailed specifications of the Bluetooth. 2.7.1 Basic Specifications Version Bluetooth® Version 2.0 + EDR Master The master establishes a connection with Bluetooth equipment in slave mode waiting for connection with the master. Client (Slave) The client (slave) becomes in waiting mode for communication initiated by the master. Security/Encryption This performs security (PassKey exchange) and encryption as laid down in the Bluetooth standard.
2.7.2 Communication Profiles The Bluetooth profiles described in the table are supported. Table 2.73 Function GAP (General Accessible Profile) SDP (Service Discovery Profile) Serial Profile (Client) Serial Profile (Server) DUN (Dial-Up Network) PAN (Personal Area Network) OBEX Object Push Profile File Transfer Profile Purpose Used in the substructure segment of Bluetooth communications such as device discovery, link establishment and security.
2.7.3 Security This feature supports security functions laid down in the Bluetooth standard. The Bluetooth security is divided into authentication and encryption. These are realized by the use of PassKey (otherwise known as PIN code). PassKey is a shared (common) authentication key used when forming a connection and trust relationship (bonding) with Bluetooth equipment. A maximum of 16 characters (in ASCII code) can be used, but there may be limitations on the no.
2.7.5 Communication Procedure The following is the basic procedure for using Bluetooth to carry out communication. 1. Opening the Bluetooth (Initializing) This function initializes the Bluetooth using either the Bluetooth tool or the Bluetooth Library. It will turn on the power to the Bluetooth module integrated in the terminal and initialize the Bluetooth protocol stack. 2. Searching a Bluetooth equipment Searches a Bluetooth equipment using the Bluetooth tool or the Bluetooth Library.
2.7.6 Communication Procedure by Profile While Bluetooth communication takes place, there is a chance that the communication link may be interrupted due to radio wave condition in air, so the retry process is always recommended in application to verify the communication.
2.7.7 Process after Communication Interruption With Bluetooth communication, there is a chance that the communication link may be interrupted due to radio wave conditions in air. An error occurred during the communication is detected by carrying out WriteFile API function, ReadFile API function, etc. In case where the communication is interrupted, carry out the normal Bluetooth interruption process using the Bluetooth tool or in application and then retry to establish the same connection for communication.
2.7.10 Simultaneous Use with WLAN Since Bluetooth employs the same frequency range (2.4GHz ISM band), Bluetooth cannot be operated concurrently with WLAN. However, it is possible to make mutual interference less by following the instruction without turning off the power of either device. • If the partner Bluetooth device supports AFH (Adaptive Frequency Hopping) - Separate the frequency range definitely for Bluetooth and for WLAN.
2.7.11 Communication Range The communication range for Bluetooth communication between two Bluetooth devices should be 3 meters or less. If there is an obstacle exists on the path that blocks radio wave, the actual range may become shorter. Secure free path for maximum range.
2.8 WLAN The IEEE802.11 b/g WLAN is operable with integrated WLAN module (model dependant). The IEEE802.11 b/g standard utilizes 2.4 GHz ISM (“Industry Science Medical”) frequency band, which is used for short range wireless communication. Device Name On the terminal, the device name used to capture data, with DeviceIoControl function, about the WLAN driver is “SDIO86861”. 2.8.
2.8.2 Expanded Features Power ON/OFF Control The power to the integrated WLAN module can be controlled in application. Turning off the power when the WLAN module is not in use can save power, prevent line congestion and allow the on-board use of the terminal in aircraft. However, it is recommended to consult a cabin crew prior to use of it. Operation Configuration File The operation configuration file can be used to set each default value of the WLAN settings.
2.8.3 Roaming This feature automatically switches one Access-Point to another in where two or more Access-Points with the identical SSID code exist are installed. 1. Searches for Access-Points that can communicate with the terminal, and lists up radio wave status of each Access-Point. 2. Compares radio wave status of the currently connected Access-Point with those for the listed Access-Points. 3.
2.8.4 Zeroconfig This feature coordinates with the module firmware and the WLAN driver to perform some of the WLAN link management and the Network management. • If multiple SSIDs are registered as prioritized connections, attempt to establish connection will be performed to each registered SSID. In this case, the interval of time period for reconnecting will become prolonged. If the reconnection time ranks important, register one SSID only as prioritized connection.
2.8.5 Channels The no. of WLAN channels set by default at the factory is “1CH-13CH” (13 channels) compatible with the ETSI standard (EU radio standard). 2.8.6 WLAN Setting with Configuration File The configuration file can be used to set the default values for the WLAN settings. By loading the configuration file into the terminal, setting to configure the WLAN operations can be easy. • The configuration file is “\Documents and Settings\System Settings\WLANCFG.ini”.
File Format The file format of configuration file is INI format which follows restrictions described below. • The maximum size of the configuration file is 60 Kbytes. • A line starting with “;” is regarded as comment. It does not regard as comment if located in mid-line. • The separator for KEY and VALUE is “=”. Space and tab, etc., also are included in either KEY or VALUE. If a space is inserted after “=”, for example, in “SSID= tunami”, the SSID value includes the space (“ ”)+tunami.
STATIC section This section specifies parameters necessary for the integrated WLAN module to establish connection with Access-Point. Table 2.78 KEY SSID ADHOC WEP KEYINDEX KEYDATA SECURITY AUTH WEP_OPEN_KEYINDEX WEP_OPEN_KEY WPA_PEAP_USER WPA_PEAP_PASS WPA_PEAP_DOMAIN WPA_PEAP_VALIDATESERVER WPA_TLS_DOMAIN WPA_TLS_VALIDATESERVER WPA_TLS_CERTIFICATE WPA_PSK_KEY WPA2_PEAP_USER WPA2_PEAP_PASS Continue. VALUE Set SSID. Set Infrastructure or AdHoc mode selecting either value.
WPA2_PEAP_DOMAIN WPA2_PEAP_VALIDATESERVER WPA2_TLS_DOMAIN WPA2_TLS_VALIDATESERVER WPA2_TLS_CERTIFICATE WPA2_PSK_KEY Set domain name of WPA2_PEAP. Set WPA2_PEAP server certificate to be valid or not selecting either value. 0: Server certificate invalid 1: Server certificate valid Set domain name of WPA2_TLS. Set WPA2_TLS server certificate to be valid or not selecting either value. 0: Server certificate invalid 1: Server certificate valid Set friendly name of WPA2_TLS client certificate.
Examples of settings for STATIC section Example 1; If WEP is used. [STATIC] SSID=tunami ADHOC=0 WEP=1 KEYINDEX=0 KEYDATA= 5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9BE Example 2; If WEP is used. [STATIC] SSID=tunami SECURITY=WEP AUTH=OPEN WEP_OPEN_KEYINDEX=1 WEP_OPEN_KEYDATA= 5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9BE Example 3; If WPA or PSK is used. [STATIC] SSID=tunami SECURITY=WPA AUTH=PSK WPA_PSK_KEY=5C1E1455A2D504920483C5EABE Example 4; If WPA or PEAP is used.
TCIP/IP section This section sets the integrated WLAN module’s IP address. Table 2.79 Key DHCP IPADDRESS SUBNETMASK DEFAULTGATEWAY DNS1 DNS2 WINS1 WINS2 VALUE Set “Enable” or “Disable” on the DHCP. If “1: Enable DHCP” is selected, the subsequent settings are not necessary to set. 1: Enable DHCP. 0: Disable DHCP. Set IP address. Set subnet mask. Set default gateway. Set primary DNS server address. Set secondary DNS server address. Set primary WINS server address. Set secondary WINS server address.
Example ; Configuration File [WLAN] WLANPOWER=1 POWERSAVE=1 WLANCFG=1 BandConfig=1 RoamingRSSILevel=-78 RoamingAvailableTime=15 RoamingRSSISpan=1 RoamingAvailableTime=60 BandConfig=1 MAX_SCAN_TIME=105 SCAN_CHANNELS=123456789ABCDE WLAN_CFGTOOL=WLANCONFIG [STATIC] SSID=tunamiAP1200imai ADHOC=0 SECURITY=WEP=1 AUTH=OPEN WEP_OPEN_KEYINDEX=01 KEYDATA= 5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9BE WEP_OPEN_KEY=516DFEC900486137CB9D8C82993F184B508A916F5B5E733A0159 [TCP/IP] DHCP=0 IPADDRESS=192.168.1.
2.9 WWAN This chapter describes about detailed specifications of the integrated WWAN module. 2.9.1 Basic Specifications The terminal (model dependant) supports the following communication protocols. Table 2.
2.9.2 Available Features Power Control This controls the WWAN module’s usage. Data Acquisition This acquires WWAN module information. GPRS Communication Data This obtains the following status data on the GPRS communication. Received signal intensity Operator Connection Control This enables connection to the GSM network. • Operator list acquisition • Operator connection method acquisition settings • Operator data acquisition GPRS Communication This connects to the IP network using Dial-up or RASAPI.
Notes: • The WAN Communication functions are provided by the WAN Settings tool. Refer to “WAN Settings” for detail. • User applications can be developed to support the WAN Communication functions using the WANGPRS Library. For detail, refer to the WANGPRS Library manual.
2.10 GPS Positioning Function This chapter describes about detailed specifications of the GPS. 2.10.1 Basic Specifications The terminal supports the following functions that come with the integrated GPS module. Table 2.
2.10.2 GPS Function API Latitude and longitude data are obtained using independent positioning to provide the following functions. • Obtains positional data from user application via the GPS intermediate driver (Windows Mobile standard GPS interface) • Displays satellite reception status with the GPS Information tool Note: Refer to “GPS Information” with the GPS Information tool for detail. The GPS intermediate driver provides GPS information in two ways.
NMEA Sentence Output The NMEA-0183 is output in text format with each item separated by a comma (,) and sentences separated by a new line code (CRLF). The checksum is added up at the line end. The checksum calculates the XOR’ed value of character data enclosed by $ , ' and * in hexadecimal string values. Table 2.85 $ Sentence-identifying character , value (, value)… *Checksum CRLF Multiple sentence types are defined.
GGA Sentences This displays GPS fix data. Example of output: $GPGGA,095635.00,3540.05802,N,13921.63542,E,1,06,1.54,212.5,M,39.2,M,,*59 Table 2.86 Item $GPGGA 095635.00 3540.05802 N 13921.63542 E 1 06 1.54 212.5 M 39.2 M Description UTC time is displayed in the hhmmss.ss format. Displays latitude. The value at the left shows a longitude of 35 degrees and 40.05802 minutes. N and S indicate north and south respectively. Displays longitude. The value at the left shows a longitude of 139 degrees and 21.
GSA Sentences This outputs GPS DOP and active satellite data. Example of output: $GPGSA,A,3,13,17,28,04,02,23,,,,,,,2.38,1.54,1.82*09 Table 2.87 Item $GPGSA A 3 13,17,28,04,02,23, ,,,,,, 2.38 1.54 1.82 Description Positioning mode A = 2D/3D auto-select M = 2D/3D manual-select Positioning status 1＝no signal 2＝2D 3＝3D Satellites from which signal is being transmitted. Displays up to 12 satellites. Shows PDOP.
GSV Sentences This outputs data on GPS Satellites in View. GSV sentences show current data on the satellites from which a signal can be received. A single sentence contains data up to four satellites. Data on the fifth and subsequent satellites is output in multiple lines. In the example below, data is provided on eight satellites in two sentences.
RMS Sentences This outputs data on the Recommended Minimum. Example of output: $GPRMC,095636.00,A,3540.05781,N,13921.63500,E,0.851,193.03,011107,,,A*62 Table 2.89 Item $GPRMC 095636.00 A 3540.05781 N 13921.63500 E 0.851 193.03 011107 A Description UTC time is displayed in the hhmmss.ss format. Indicates status: A = data is valid. V = data is invalid during measurement. Displays longitude. The value at the left shows a longitude of 35 degrees and 40.05781 minutes.
Positioning Data Using the GPS Intermediate Driver API The Windows Mobile GPS intermediate driver provides an API to analyze NMEA character strings and obtain positioning data. The GPS intermediate driver API can be used in the following procedure. 1. Create an event with CreateEvent() in order to detect GPS module status changes and output. 2. Connect to the GPS module with GPSOpenDevice(). GPS module status and positional changes can be registered for each event with GPSOpenDevice().
Figure 2.13 List of the Functions The functions which can be used with the GPS intermediate driver API are listed below. Table 2.91 Function Description Closes the GPS intermediate driver and connects to the GPS device. GPSCloseDevice Retrieves the status of the GPS module. GPSGetDeviceState Retrieves GPS positioning data. GPSGetPosition Opens the GPS intermediate driver and connects it to the GPS device.
2.11 Power Control This chapter describes about detailed specifications of the power controls. 2.11.1 Monitoring Low Voltage Four levels of the low voltage monitor control are provided for the terminal. Table 2.
Memory Backup Battery The following shows levels available for the memory backup battery. The terminal’s system checks the status of the backup battery every five minutes. Since power source of charging the memory backup battery is supplied by the battery pack, charging it may not be carried out sufficiently if the battery pack has not been accommodated for a long period or is not being fully charged.
The status of both battery pack and memory backup battery can be monitored with Microsoft’s GetSystemStatusEx2() API function in your application to retrieve the status values described in the table. Table 2.96 Member ACLineStatus Description Retrieves the status of AC power. Retrieves the status of battery pack. Returned Value AC_LINE_OFFLINE : AC power is off. AC_LINE_ONLINE : AC power is on. BatteryFlag BATTERY_FLAG_HIGH : OK BATTERY_FLAG_LOW : Low BATTERY_FLAG_CRITICAL : Almost exhausted.
2.11.2 Power ON Factors The following is the power ON factors. These factors can be set enabled or disabled using the System Library. Power ON Factors • The Power key is pressed while the power is off. • A time period set for the Alarm function elapsed. • The terminal is mounted on cradle while the power is being supplied by AC Adaptor via the cradle. • Trigger key is pressed. • Reset switch on the back of the terminal is pressed.
2.11.3 Power OFF Factors The following is the power OFF factors. • The Power key is pressed while the power is on. • Neither key input, disk access, nor communication is performed within a preset time period. • Output voltage from the battery pack is low (VDET2, VDET3) (see note below). • The battery cover lock switch is open. • Internal temperature in the terminal exceeds the limit set by the system (see note below). Note: The warning message appears a next time when the power is turned on.
2.11.4 Controls on Power Key Time period after pressing down the Power key It takes approximately one second for the system to recognize turning on or turning off the power after the Power key is pressed down. Disable Power Key after Turning On the Power After turning on the power, the Power key is set disabled for a certain period of time. This prevents turning off the power while various drivers are being loaded. This time period can be set with the System Library.
2.11.5 Power Saving Idle The power is saved by putting the CPU into idle state when event standby status is detected by either the terminal or application running on the terminal. The peripheral devices are in operating state while the CPU is in the idle state. Auto Power OFF (APO) The power is automatically turned off (“APO”) if no key input, no disk access, or no communication is made during a preset time period.
Virtual Power OFF/WLAN Standby This is standby mode for WLAN operation. The System Library is used in application to turn off the LCD, keys and set the CPU frequency to “POWERSAVE” mode to save the power. Other peripheral devices are in operating state. Table 2.
2.11.6 CPU Power State Control The following shows the power states operable on the terminal. Table 2.100 State Discharge RTC backup SLEEP mode RUN mode POWERSAVE NORMAL TURBO AUTO IDLE mode DeepIdle Contents State in that the battery pack and the super capacity have been discharged. Neither content in the RAM nor the RTC is backed up. State in that only the RTC is being backed up. The content in the RAM is not backed up.
Discharge Operating / Memory backup battery insertion Memory backup battery empty RTC backup SLEEP mode Operating battery empty Power ON Power ON Power OFF WakeUp VDET2 / VDET3 Battery Cover open RUN mode Mode Turbo Power save Normal NORMAL TURBO No activity POWERSAVE Interrupt IDLE mode DeepIdle Figure 2.
2.11.7 Virtual OFF by Application Virtual OFF The Virtual OFF is a function and its main object is to save power. Internally, the terminal is running normally but it seems to be with the power being turned off – unable to display and input a key. This function is mainly used to provide the terminal user with fast resume from standby state in WLAN communication. Virtual OFF State Transition The state transition diagram of Virtual OFF is below.
SysSetVirtualOffMode（ENABLE） SysDisablePowerOff SysDisableAPO Virtual OFF Mode Ordinary ON State Mode SysSetVirtualOffMode（DISABLE） SysEnablePowerOff See note. SysEnableAPO PBT_APMSUSPEND Key lock Display OFF Audio OFF Retrieve current CPU mode Cancel key lock Display ON Audio ON Return CPU mode to the previous state Change CPU mode to POWERSAVE PBT_APMRESUMESUSPEND Virtual OFF Mode OFF State Figure 2.
2.11.8 Virtual OFF by System The “Virtual OFF” explained in Chapter 2.11.7 and adopted in the past for the CASIO previous models is controlled by application. The DT-X30 and new coming models in future will support a new virtual off mode - Virtual OFF by the System. The Virtual OFF by application is set in ON state of the ordinary condition and is controlled by the System Library in application.
Note: Each device goes into the following state in the Virtual OFF. Table 2.101 Device Display Key WLAN Bluetooth IrDA USB Scanner Operation Not operable Not operable Operable Operable Operable Operable Operable Device Audio Buzzer Vibrator LED FlashDisk CPU Operation Not operable Not operable Not operable Operable Operable at 104MHz 2.11.9 Charging/Supplying the Power The optional Dual Battery Charger (HA-G32DCHG) can be used to charge battery packs (two at a time).
2.11.10 Temperature Control If temperature rise is detected in the terminal when running at the highest clock frequency (under such the condition that the CPU speed at “TURBO”, the integrated WLAN module in active mode, etc.), a warning message (see Figure 2.18) appears and the power is turned off to protect the integrated devices in the terminal. Figure 2.
2.12 Security This chapter describes about detailed specifications of the security. 2.12.1 Setting Password for Terminal This is the password setting implemented in the Windows Mobile models (model dependant). Your password can be set at the Control Panel. Click the Lock icon to initiate the Password Settings screen, and then enter your password in each field. 2.12.2 Setting Individual ID Individual ID is written into a predetermined area in the FlashDisk at time of shipping from the factory.
3. Control Panel Applets The Control Panel applets are programs that display the content of the various parameters for the terminal itself and to change the settings. Note: Different from the Windows CE models, the terminology - Control Panel - is not used for the Windows Mobile models. However, in this reference manual application program which is initiated by navigating to Start → Settings is called “Control Panel applet”. The Control Panel has three tabs.
Table 3.2 System Tab Name About Description Displays system information. Backlight Changes the backlight brightness. Buzzer Sets up buzzer sound volume. Certificates CASIO -- MS Yes -- Yes Yes -- Displays the terminal’s digital certificate. -- Yes Clock & Alarms Changes the date, time, and alarm settings. -- Yes CPU Speed Sets up the CPU’s clock frequency. Yes -- Customer Feedback Enables Customer Feedback possible.
Table 3.3 Connections Tab Name Beam Description Enables the terminal to receive all incoming beams. CASIO -- MS Yes Yes -- Connections Carries out connection establishment with Bluetooth device. Connection Manager -- Yes Domain Enroll Controls the terminal to your network. -- Yes Network Cards Configures network adapters. -- Yes USB to PC Enables advanced network functionality. -- Yes WAN Settings Sets up the power for WAN and the parameters required for WAN configuration.
3.1 Buttons This applet is for setting parameters concerned with operations with the keyboard. Program Buttons Tab This tab is for reassigning a program to a key. Figure 3.1 Note: The DT-X30 has no keys for program assignment. You cannot assign a program to a key in this applet. Up/Down Control Tab This tab is for specifying the key repeat rate. Figure 3.2 Delay before first repeat This adjustable slide is to set a waiting time period until when repeating key entry starts.
Others Tab Figure 3.3 User definition key Specifies “Enable” or “Disable” for the user definition key. Turn-over key automatic decision Specifies “Enable” or “Disable” for the turn-over key automatic decision. If “Enable” is chosen, sets a period of time to wait for the decision delay.
3.2 Input This applet is for changing the current input method and options. Input Method Tab Figure 3.4 To change the input method, select a favorite method in the Input method pull-down menu. The Windows Mobile® models have the four input methods. Block Recognizer Keyboard Letter Recognizer Transcriber : Use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. Do gestures to enter Return and Backspace.
Word Completion Tab This tab is for setting the word completion feature. Figure 3.5 To enable the word completion feature, select Suggest words when entering text checkbox and set other relevant options. Options Tab This tab is to adjust preferences for writing and recording. Figure 3.
3.3 Lock This applet is to set up a password that is used to start up the terminal. Password Tab Figure 3.7 Prompt if device unused for Check the checkbox if password input is required every time the terminal is turned off and then turned on during the time period selected in the pull-down menu. For example, selecting “0” in the pull-down menu makes the password enter screen pop up every time when the terminal is turned on asking the user to enter a password before starting any operation.
Hint Tab This tab is for setting up a password hint. Figure 3.8 To help you recall your own password, enter a word or phrase that reminds you of the password.
3.4 Menus This applet is used for changing the content of the Start menu. You can select up to seven programs. Figure 3.
3.5 Owner Information This applet is for setting information related to the owner. Identification Tab Figure 3.10 Name This field is for specifying the owner’s name inputting alphabets from the Input Panel appeared at the lower part on the screen. Company This field is for specifying name of the company that the owner belongs to. Address This field is for specifying an address. Telephone This field is for specifying a phone number. E-mail This field is for specifying an e-mail address.
Notes Tab Figure 3.11 Notes Using this field, a memo can be freely written. Options Tab Figure 3.12 To display identification information or note when starting up the terminal, select either the Identification information checkbox or the Notes checkbox.
3.6 Sounds & Notifications This applet is to set up event sounds and notification options. Sounds Tab This tab is to set up “Enable” or “Disable” for sound types of each event listed in the figure below. Figure 3.13 Check the checkbox of each event you wish to set up sound. Notification Tab Figure 3.14 In the Event pull-down menu, tap an event name and then set up the relevant options for how you want to be notified. The options include special sound, message, and flashing light.
3.7 Today This applet is used for customizing the Today screen. Appearance Tab This tab is used for changing the appearance of the Today screen. Figure 3.15 To change the current theme, highlight a new theme in the Select a theme for your device menu. To change the background image in the Today screen, follow the steps below. 1. Select the Use this picture as the background checkbox and tap Browse button to make a list of your picture files appear. 2.
Items Tab This tab is used for changing the items that appear in the Today screen. Figure 3.16 To add or remove items in the Today screen, check the checkbox next to each item name to add, or remove the check to remove. To change the listed order of an item displayed in the Today screen, select the item and tap Move Up button for upper position or Move Down button for lower position.
3.8 About This applet is used for displaying and setting parameters concerned with the internal system of the terminal. Version Tab This tab displays OS version, integrated CPU name and available RAM size. Figure 3.17 Device ID Tab Figure 3.18 Device name This field is for setting device name for the terminal itself. Spaces with device name entered in the field are not allowed. Description This field is to enter text string for the device description.
Copyrights Tab This tab is for displaying the OS copyright information. Figure 3.
3.9 Backlight This applet is for setting brightness for the power source provided by either installed battery or external power source from the dedicated AC Adaptor via cradle, the backlight auto dimming, and the backlight auto off. Note: Do not remove the check from Turn off backlight when a button is pressed or the screen is tapped checkbox in both Battery Power Tab (see Figure 3.20) and External Power Tab (see Figure 3.21).
External Power Tab Figure 3.21 To set the backlight auto off, select Turn off backlight if device is not used for checkbox, and a period of elapse time in the pull-down menu. Battery Brightness Tab Figure 3.22 Brightness level The upper slider is for specifying brightness in one of nine grades which becomes effect while battery pack is being used as the power source.
External Brightness Tab Figure 3.23 Brightness level The slider is for specifying brightness in one of nine grades which becomes effect while an external power supply - by the dedicated AC Adaptor via cradle - is used as the power source.
3.10 Buzzer This applet is to set up “Enable” or “Disable” for buzzer sound and its sound volume in one of the three grades (minimum, medium, and maximum) for each event. Setting on the sound volume can be checked by clicking the respective triangle buttons on the right side. Figure 3.
3.11 Certificates This applet is used for editing certificates trusted by the user. Personal Tab Figure 3.25 Personal certificates identify the user of the terminal. Intermediate Tab Figure 3.26 Intermediate certificates help authenticate certificates received from other hosts.
Root Tab Figure 3.27 Root certificates authenticate certificates received from other hosts.
3.12 Clock & Alarms This applet is for setting date, time and time zone. Time Tab This tab is for setting time zone, time and date. Figure 3.28 Alarms Tab This tab is for setting alarms. Figure 3.29 To set alarms, follow the steps below. 1. Tap < Description > and enter a name for the alarm. 2. Tap the day of the week for the alarm. You can select multiple days by tapping each desired day of the week. 3. Tap the time to open a clock and set the time for the alarm. to specify the type of alarm you want.
More Tab This tab is for setting options. Figure 3.30 To display the clock in the title bar, select Display the clock on the title bar in all programs checkbox.
3.13 CPU Speed This applet is for setting the CPU operating speed. Figure 3.31 TURBO This mode sets the CPU frequency to 624 MHz. The mode is disabled when the Automatic Mode is set effect. STANDARD This mode sets the CPU frequency to 312 MHz. The mode is disabled when the Automatic Mode is set effect. POWER SAVING This mode sets the CPU frequency to 208 MHz. The mode is disabled when the Automatic Mode is set effect.
3.14 Customer Feedback This applet is for enabling Customer Feedback. Figure 3.32 While Customer Feedback is enabled, general usage information is collected and sent to Microsoft. No personally identifiable information is collected, and there are no airtime charges to you.
3.15 Encryption This applet is for enabling to encrypt files placed on storage cards. Figure 3.33 Encrypt files when placed on a storage card Encrypted files are opened just like other files, provided you are using the terminal that encrypted them. There is no separate step for you to take to read these files.
3.16 Error Reporting This applet is for enabling Error Reporting. Figure 3.34 While Error Reporting is set enabled, serious error information is collected and sent to Microsoft.
3.17 External GPS This applet is used to configure the built-in GPS receiver. Programs Tab This tab is for selecting the port from which programs will access GPS data. The program port must be a different port than the one specified as the hardware port. Figure 3.35 Hardware Tab This tab is for selecting the port to which your GPS receiver is connected. The hardware port must be a different port than the one specified as the program port. Figure 3.
Access Tab This tab is for enabling multiple programs to access GPS data simultaneously, the terminal automatically manages access to your GPS receiver. It is highly recommended that this option always be selected. Otherwise, only one program at a time can access your GPS receiver. Figure 3.
3.18 Imager Setting This tool allows the user to change the parameters and operating modes required for reading 1D and 2D bar code symbologies with the integrated C-MOS imager (model dependant). The changed parameters and modes are saved in ini file and become effect automatically when the TDRead application invokes. 1D and 2D Tabs These tabs are to set up the 1D bar code symbologies in the 1D tab and 2D bar code symbologies in the 2D tab respectively.
Option Tab This tab is to set up relevant options for scanning a symbol of the specified bar code symbology. Figure 3.40 Enable With a check mark in the checkbox, it is possible to scan the bar code symbology selected in the pull-down menu. Digit Range This field is to set up the effective range of reading symbol of the selected bar code symbology, the pull-down menu on the left side is for the minimum number of digits and the other on the right side is for the maximum number of digits.
Decode Tab This tab is to set up options for decoding scanned bar code data. Figure 3.41 Print Weight This field is to set the intensity in the range of 1 to 7 for target printed symbol. Setting a value higher improves reading a symbol printed in dark color, or lower improves reading a symbol printed in pale color. Decode Deliberation This field is to specify decode deliberation mode by selecting one in the modes listed below.
Exposure/LED Tab This tab is to specify the intensity for both LEDs, Aimer and Illumination. Figure 3.42 Aimer Laser This field is to set the intensity of the Aimer to either “0” for turning off or “100” for turning on. Illumination LED This field is to set the intensity of the Illumination to either “0” for turning off or “100” for turning on.
Multi Step Tab This tab is to specify a reading mode by selecting one of the radio buttons in the figure. Figure 3.43 Normal Mode This radio button selects the normal read mode. Multi Step Mode This radio button selects the multi-step read mode which continuously reads multiple symbols until when the Trigger key is released.
System Tab This tab is to set a period of time for the APO (Automatic Power OFF) function to activate and “Enable” or “Disable” for turning on the power on the terminal with the Trigger key. Figure 3.44 Scanner APO This filed is to set a period of time in the range of 0 to 1800 (in second) for the APO function to activate. Setting “0” will disable the function. Power up device with trigger key This checkbox is to set “Turning on the power of the terminal with the Trigger key” effect.
IMGRead Tab This tab is for setting the parameters for “Image Scanner Read”. Figure 3.45 Timeout This field is to set a time period for the Timeout to activate in scanning operation. Scanning terminates either when the Trigger key is released or when the time period in milliseconds set in this field elapses. Add Suffix This field is to specify a suffix that is appended at the end of each decoded data.
About Tab This tab displays current version information of the imager setting tool. Figure 3.
3.19 Managed Programs This applet is used for displaying the information about programs installed by your system administrator. Figure 3.
3.20 Memory This applet is used to view the usage of main memory and storage card memory. Main Tab Figure 3.48 The amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. Storage Card Tab Figure 3.49 You can see how much memory is available on a storage card that is inserted into your terminal.
3.21 Power This applet is used to view the status of batteries and set power management options. Battery Tab Figure 3.50 This tab provides information about status of main battery (lithium-ion battery pack) and backup battery. Advanced Tab Figure 3.
3.22 Regional Settings This applet is for setting display method and format of your regional items such as numeric value, currency, date, and time. Region Tab This tab is for selecting your language and regional items. The items you select determine which options are selected by default on the other tabs. Figure 3.52 Number Tab This tab is for setting display format of numeric value. Figure 3.
Currency Tab This tab is for setting display format of currency. Figure 3.54 Time Tab This tab is for setting display format of time. Figure 3.
Date Tab This tab is for setting display format of date. Figure 3.
3.23 Remove Programs This applet is used to display all programs installed in the terminal and delete them. To remove a program, highlight the program in the field (see Figure 3.57) you want to remove, and tap Remove button. Figure 3.57 Note: Programs burnt in the ROM in the terminal cannot be deleted.
3.24 Scanner Setting This applet is to change the settings for the integrated Laser Scanner (model dependant). For detail about each parameter, refer to Chapter 2.2 “Laser Scanner”. Read barcode Tab This tab is for specifying bar code symbologies to scan. Multiple bar code symbologies can be specified. Figure 3.58 Driver Mode Tab This tab is to set “Enable” or “Disable” for scanning each bar code symbology of the symbologies listed in Read barcode tab and its parameters listed below. - Min (No.
Read operation and Read operation 2 Tabs These tabs are to set the following parameters related to scanning bar code symbologies. Choose a mode you wish to set in each pull-down menu. Options of read mode in Read operation Tab (see Figure 3.60) • • • • • Selection of the read method, “Continuous read” or “Single read”. Selection of beam width for the scan width control function, “Wide”, “Middle” and “Narrow”. Selection of the scan verification beam function, “Disable” or “Enable”.
Notification Tab This tab is to set up notification method selecting one of the methods listed below. The notification is issued when scanning a bar code is complete. Lights up the LED. Sounds the buzzer. Figure 3.62 Scanning Key Tab This tab is to set up “Enable” or “Disable” for each key of the keys listed below as the scan trigger key.
Others Tab Figure 3.64 Calibration Button This button displays the OBR calibration screen to set up the calibration of laser beam swing angle. Follow the guidance appeared on the screen to complete the calibration. The swing angle has been set at the factory prior to shipment. Only if it is almost certain that the swing angle is not right, adjust it in this mode. Restore default setting Button This button resets setting contents and restores all the settings to the defaults.
3.25 Screen This applet is for changing the screen orientation, aligning the screen, and adjusting the text size. General Tab This tab is for changing the screen orientation and aligning the screen. To change the screen orientation, tap one of the Orientation radio buttons. To realign the touch screen, tap Align Screen button and follow the instruction appeared. Figure 3.66 Clear Type Tab This tab is for enabling a font-smoothing technology. Figure 3.
Text Size Tab This tab is to adjust the text size. Figure 3.68 To adjust the text size, move the slider right or left to increase or decrease the text size.
3.26 Task Manager This applet is used to view running tasks, switch tasks, and stop tasks. Figure 3.69 1. 2. 3. To switch to selected program, tap the program that you want to use and navigate to Menu → Switch To. To stop running program, tap the program that you want to stop and tap End Task. To stop all running programs, navigate to Menu → End All Tasks. Table 3.
3.27 USB Connection This applet displays connection establishment with PC or other device in USB mode. It is also used to change the connection related parameter settings. Status Tab Figure 3.70 Figure 3.71 Can be connected to PC message appears in the tab (see Figure 3.70) when the terminal is connected to PC in USB Client mode (USB Function mode). Or, Can be connected to LAN or Modem message (see Figure 3.71) appears when the terminal is connected to LAN or modem in USB Host mode.
Connect Utility Tab Figure 3.72 Windows Mobile Device Center/ActiveSync Set this radio button effect to establish connection in Windows Mobile Device Center (or ActiveSync) between the terminal and PC via the USB connection. The radio button has been set effect by default. LMWIN/FLCE Set this radio button effect to establish connection in LMWIN (or FLCE) between the terminal and PC via the USB connection.
3.28 Version Info This applet is used to display each version number of the OS, boot section, loader, and service pack integrated in the terminal. Figure 3.
3.29 Windows Update This applet is used to keep the integrated operating system up to date. Figure 3.
3.30 Beam This applet is for enabling to receive all incoming IrDA and Bluetooth beams. Figure 3.75 To enable you to receive all incoming beams, check the Receive all incoming beams checkbox. Note: To conserve battery power, make the Receive all incoming beams effect only for a period you are receiving beamed files.
3.31 Bluetooth 3.31.1 Devices This applet carries out connection establishment with other Bluetooth device. Figure 3.76 Devices screen Below is a list of the devices displayed in the screen if existed. Table 3.
Toolbar in the screen The meanings of each icon appeared in the toolbar in the Devices screen are as follows. Table 3.6 Icons in the toolbar Icon Description Displays the main menu. Display the multi-menu. The content of this menu differs depending on which screen is displayed. When multiple screens are open, closes the current screen. When multiple screens are open, selects and then moves the selected screen. Searches Bluetooth devices, and updates the devices list. Configuration of the menu Table 3.
Searching Device To search Bluetooth device in the vicinity, click the (Update) icon in the toolbar. If a Bluetooth device is sought, the content of the devices list is updated. Device Properties Choose Properties in either the multi-menu or context menu to display Device Properties screen below. Figure 3.77 : Bluetooth address of the device sought. Address : Name of the device sought. Name : Type of the device sought. Type : This checkbox is selected if bonding with the device sought.
PassKey Exchange When bonding with Bluetooth device or retrieving services or establishing Bluetooth connection takes place, the terminal may display a window showing in the following figure requesting PassKey (PIN code). If the PassKey has been set, enter it in Enter passkey field, or a new PassKey if it has not been set beforehand. The same PassKey must be used by both the Bluetooth devices. • Characters to be entered in Enter passkey field must be in ASCII characters up to 16.
3.31.2 Services In Devices screen, double clicking a device appeared in the screen displays a list of the services available on the partner Bluetooth device as shown below. Figure 3.79 Services screen Double clicking any one of services appeared in the screen establishes Bluetooth connection using the service. Note the following. • Of services you choose, file transmission will be automatically carries out by the service.
Configuration of the toolbar The roles of each icon in the toolbar are as follows. Table 3.11 Icon Icons in the toolbar Description Returns to the Devices screen. Displays the main menu. Displays the multi-menu. The content of the menu differs depending on screen displayed. When multiple screens are open concurrently, closes the current screen appeared and returns to the screen one path before. When multiple screens are open, selects and moves a screen.
Connection via Serial Port Profile (SPP) The Serial Port Profile enables establishing connection with a Bluetooth device that supports Serial Port Profile (SPP), for virtual serial communication. Establishing connection via Serial Port Profile Double click the (serial port) icon appeared in following screen to display the Bluetooth connection screen (see Figure 3.81) shown below, and establishes connection via Serial Port Profile. Figure 3.80 Figure 3.
Establishing connection in ActiveSync via Serial Port Profile Click and hold the Serial Port Profile icon to display the context menu (see Figure 3.82), and highlight Use to connect for ActiveSync in the menu. The icon changes to the icon (ActiveSync). Figure 3.82 Figure 3.83 Double click the icon establishes connection via ActiveSync in Serial Port Profile. If Serial Port Profile is not used, click and hold the icon, and then highlight Do not use for ActiveSync connection.
Connection via Dial-Up Network (DUN) Profile This profile enables dial-up communication with a Bluetooth device via Dial-up Network (DUN). Double clicking the (dial-up) icon displays the screen shown in the following figure. Window for Dial-up If there is no telephone number has been set for the dial-up connection, the following window appears for setting a new phone number. Figure 3.84 Enter appropriate number in each field in the window above and click ok button.
Screen for Setting up Bluetooth Clicking Properties button in the Network Log On window, BluetoothDUN screen appears for setting up Bluetooth related parameters. Figure 3.86 Figure 3.87 Use this BluetoothDUN setup screen to configure various parameter settings. Settings in each tab of BluetoothDUN screen are described below. Ip Tab This tab is used to set up TCP/IP related settings for dial-up communication. Figure 3.
Proxy Tab This tab is used to set up proxy related settings. Figure 3.89 Modem Tab This tab is used to set up modem related settings. Click Dialing patterns … button in Figure 3.90 to display the Dialing patterns window in Figure 3.91. Figure 3.90 Figure 3.91 Closing the communication After establishing connection via Dial-up Profile, click the icon in the toolbar (see Figure icon in 3.81) to close the communication. To close the Bluetooth connection screen, click the the toolbar.
Personal Area Network (PAN) Profile Personal Area Network (“PAN”) Profile establishes connection with a Bluetooth device for communication via TCP/IP protocol. Establishing connection via Personal Area Network Profile Double clicking the (Personal Area Network) icon will display the Bluetooth connection screen shown in Figure 3.93 indicating connection with a Bluetooth device via Personal Area Network Profile has been established. Figure 3.92 Figure 3.
Changing the Network Settings To change the network settings of Personal Area Network, navigate to Start → Settings → Connections tab first, and then tap Network Cards or tap Wi-Fi → Network Adapters tab. Tap RX Bluetooth PAN Adapter (see Figure 3.94) displays the setup screen (see Figure 3.95) for changing IP address and server address. Figure 3.94 Figure 3.
Transmitting Files via Object Push Profile This profile enables file transmission via either Business Cards, Calendars, Email, and Note service. Double click either one of the (Business Cards) icon, (Calendars) icon, (Notes) icon to transmit files. (Email) icon, and Note: Before performing file transmission, file(s) that you wish to transmit must be specified. Example of File Transmission Using “Business Cards” Double click Send Business card icon (see Figure 3.96) to send the specified business card.
Handling Files via Bluetooth FTP Handling files and folders including transmitting files can be performed using Bluetooth FTP. Double clicking the (File) icon appeared by accessing the services of Bluetooth device establishes connection with Bluetooth FTP services of the partner Bluetooth device and then displays the screen for Bluetooth FTP as shown in the following figure. Remote files list A share folder has not been set by default. In order to set it and display in the list, create it.
Configuration of the Menus The configuration of menus of the Bluetooth FTP screen is shown below. Each menu is identical to the remote files list and local files list. Table 3.15 Context menu (When a file is selected) Menu Description Refresh Updates the list. Copy Copies the selected file. Delete Deletes the selected file. Direct Copy Transfers (or copies) the selected file by performing direct copy. Direct Move Transfers (or moves) the selected file by performing direct move.
Receiving File Choose a file in the remote file list to receive, and choose either Direct Copy or Direct Move menu in the context menu. Copies the selected file from remote to local folder. Moves the selected file from remote to local folder. Figure 3.99 Note: The progress indicator is shown at the bottom of the screen above while the file is being received.
Creating a New Folder Choose New Folder menu in the menu of remote file list or local file list to create a new folder. Figure 3.100 Figure 3.101 Renaming a File Choose Rename menu in the menu of remote file list or local file list to change file name. Figure 3.
Deleting a File Specify a file in remote files list or local files list, and choose Delete menu in the context menu as shown in Figure 3.103. Figure 3.103 Figure 3.104 Closing connection via Bluetooth FTP To close the established connection via Bluetooth FTP and return to the devices screen, click the icon in the toolbar to close the Bluetooth connection screen.
3.31.3 My Device In the Devices screen, click My Device menu in the main menu to display the My Device screen (see Figure 3.105) for various parameter settings to set up on the Bluetooth setup tool. Figure 3.105 My Device screen The icons of the services appeared in the screen are follows. Table 3.17 Icons Icons My Services My Settings My Shared Folders Description Chooses and sets up the available services on the terminal. Sets up Bluetooth setup tool. Sets up folder to be shared via Bluetooth FTP.
My Services Click My Services icon appeared in the My Device screen (see Figure 3.106) to display a list of services (Profiles) available for the Bluetooth setup tool. Figure 3.106 Figure 3.107 Below is a list of the services displayed in the My Services screen (see Figure 3.107). Table 3.18 Services and the descriptions Service Description Access Business Cards Transfers business card file (client) Access Calendars Sends calendar. Access Email Sends e-mail. Access Notes Sends notes file.
My Shared Folders This is used to set up a folder to be shared if connection is established as server mode to communicate in Bluetooth FTP. Figure 3.108 Figure 3.109 Creating a Shared Folder Create a shared folder using a window shown in the following figure for Bluetooth FTP communication. Figure 3.110 Shared Folder name Specify the name of folder to be shared. The name specified in this field will appear when master Bluetooth device establishes connection in Bluetooth FTP.
My Settings This is used to change the Bluetooth setup tool settings except settings for “My Services” and “My Shared Folders”. Device Tab This tab is used to specify the Bluetooth device name of the terminal in Name field in the following figure. If other Bluetooth device detects the terminal, the name set in this field will appear. Figure 3.111 Address Bluetooth address is indicated in this field. Name Bluetooth device name is specified with ASCII characters up to 100.
Discovery Tab This tab is used to set up Bluetooth device discovery-related settings. Figure 3.112 Discover devices automatically This checkbox enables the discovery on devices to be performed automatically when the Bluetooth setup tool starts up. Search for devices for [ ] seconds This field is to specify a time period in seconds for performing discovery.
Objects Tab This tab is used to set up files to be sent via OBEX file transmission. Figure 3.113 My Inbox Location This field is to specify the folder in which to receive files sent via Object Push communication. Object Type This pull-down menu chooses the type of object to send from the services, either Business Cards, Calendar, Email, or Notes. Object Location This pull-down menu chooses the file(s) to send corresponding to the selected type of object in Object Type pull-down menu.
Security Tab This tab is used to specify the security features defined by the Bluetooth standard. Figure 3.114 Never force Authentication This radio button allows that authentication does not take place when the terminal establishes connection in Bluetooth. Force Authentication except SDP This radio button allows that authentication takes place when the terminal establishes connection in Bluetooth for other purposes than retrieving service.
Communication Tab This tab is used to set up the Faster Connection and AFH (“Adaptive Frequency Hopping”) features. Figure 3.115 Detail Settings If any one of Avoid Wireless LAN Channel and Choose Bluetooth frequency manually radio buttons is set enabled in the Communication tab, the following detail settings can be possible using the screen below. Figure 3.
Available Bluetooth Frequency This field is used to manually set the frequency range(s) available for Bluetooth device. Set frequency range using these pull-down menus and then click Add button to add it to the list. To set more than one frequency range, perform the same operation in succession. To delete a specific frequency range from the list, choose the frequency range in the list, and then click Delete button. The selected frequency range is deleted from the list.
Power settings Tab This tab is used to display the radio frequency power of the integrated Bluetooth module. Figure 3.117 Power Class Output power class prescribed by Bluetooth standard is shown here. Default TX power Radio frequency power depending on the output power class prescribed by Bluetooth standard is shown here. Maximum TX power The value which is the same as “Default TX power” is shown here. Max Power Class The value which is the same as “Power Class” is shown here.
3.31.4 Shortcut By registering services of specified Bluetooth device to a shortcut, the services start up automatically by double clicking the shortcut a next time. Additionally, Bluetooth connection is automatically established when the Bluetooth setup tool is initiated if the settings registered to the shortcut have been set to "Auto." Registering Shortcut Register shortcuts in the Services screen. Figure 3.
Establishing Connection via Shortcut To establish a Bluetooth connection using a shortcut, access Shortcuts menu in the main menu to display the Shortcuts screen shown below. Shortcuts screen Figure 3.119 Configuration of the Menus The menu configuration of the Shortcuts screen is the same as that of the Devices screen. The menu configuration for the context menu and multi-menu of the Shortcuts screen are shown below. Table 3.
Connect Automatically If Connect Automatically is chosen in the context of the Shortcuts screen, a Bluetooth connection is established automatically when the Bluetooth setup tool starts up. A star icon appears to the left of the shortcut icon that has been set to Connect Automatically. Figure 3.120 If Connect Automatically is selected in the context menu for a shortcut already that has been set to Connect Automatically, the setting to “Auto” will be set disabled.
3.31.5 Default Devices The Default Devices sets up a Bluetooth device for connection. Normally, the setting for default device must be performed using the Bluetooth Library, but the Serial/Dial-up services can be set with the Bluetooth setup tool. Note, however, that Bluetooth setup tool can only set and delete the setting of default device; it does not establish connection with the default device. To establish connection automatically with the Bluetooth setup tool, use the feature of shortcut.
Displaying the Default Devices To display default devices, choose Default devices in the main menu (see Figure 3.122). The default devices set appears as shown in Figure 3.123. Figure 3.122 Figure 3.123 Deleting Default Device In the Default devices screen, choose the default device you wish to delete and then display the context menu. Click Unset menu to delete the selected default device. Clicking this menu deletes the setting of the specified device. Figure 3.
3.31.6 Setup Wizard The Setup wizard sets up the initial settings of the Bluetooth setup tool. Procedure for Initial Settings In the Devices screen, choose Setup Wizard in the main menu to start the initial settings. The following four screens will appear one by one every time when Next> button in each screen is clicked. 1. Welcome/Bluetooth network preferences 2. My Shared Folders 3. My Services 4. Congratulations The setting parameters in each screen are described below. 1.
2. My Shared Folders This screen is used to create a shared folder used for Bluetooth FTP communication in the server mode. Result of the settings in this screen is reflected in the settings. Figure 3.126 3. My Services This screen is used to choose services (Profiles) used for the Bluetooth setup tool. Services with check marks are set enabled. Result of the settings in this screen is reflected in the settings. Figure 3.
4. Congratulations Click Finish button to return to the Devices screen of the Bluetooth setup tool. Figure 3.
3.32 Connections This applet is for setting up multiple network connections. Tasks Tab Figure 3.129 To establish connection in GPRS, refer to “WAN Settings”. Advanced Tab Figure 3.
3.33 Domain Enroll This applet is used to enroll the terminal to your company network. Figure 3.
3.34 Network Cards This applet is used to configure network adapters. Figure 3.132 The installed network adapter drivers are listed here. Tap the adapter that you want to configure. Note: In some cases, this applet is displayed as the “Network Adapter” tab of the “Wireless Configuration” applet.
3.35 USB to PC This applet is for enabling advanced network functionality. Figure 3.133 To troubleshoot an ActiveSync cable connection, select Enable advanced network functionality checkbox.
3.36 WAN Settings This tool performs the WAN module power source settings, security settings, identification data settings, operator settings and status display. Power Tab This tab is to perform the WAN module power source ON/OFF settings. Figure 3.134 WAN Power This checkbox configures the WAN module power source to ON or OFF. Apply Button This button applies the settings selected in the checkbox.
Security Tab This tab provides the following functions according to the current SIM lock mode (unlock mode, PIN input standby mode or PUK input standby mode). SIM “Enable” or “Disable” setting is carried out in the Unlock mode. It is also possible to change the PIN code. A PIN code must be entered twice to change it. Figure 3.135 State The current SIM lock status is shown as “UnLock”. Enable SIM Lock This checkbox sets the SIM lock to “Enable” or “Disable”.
The SIM status can be changed to “Lock” by entering the correct PIN code in the PIN input standby mode. Figure 3.136 State The current SIM lock status is shown as “PIN”. Enter PINCODE Input the PIN code to change the lock status to “UnLock”. PIN Counter This displays the PIN code entry count for the current status. UnLock Button Entering the correct PIN code and clicking the “Enter PIN Code” box changes the lock status to “UnLock”.
A new PIN code can be set by entering the correct PUK code in the PUK input standby mode. The PIN code must be entered twice for a new PIN code to be set. Figure 3.137 State The current SIM lock status is shown as “PUK”. Enter PUKCODE Input the PUK code to reset the PIN code. Enter New PINCODE To reset the PIN code, enter the new PIN code then re-enter it in the second field for confirmation. PIN Counter This displays the PIN code entry count for the current status.
Identification Tab This tab displays the following identification data for the WAN module and the SIM card. Figure 3.138 Vendor This displays the name of the WAN module manufacturer. Module This displays the model number of the WAN module. Revision This displays the GSM/GPRS module revision number. IMEI This displays the telephone’s unique number (International Mobile Equipment Identity). IMSI This displays the subscriber’s identifier (International Mobile Subscriber Identity).
Operator Tab This tab enables the method of connecting the terminal with the operator (automatic connection, manual connection or adapt mode) to be set. The display screen changes depending on the present connection method setting. If the current Connect mode is set to Auto, the connection mode can be set. Figure 3.139 Connect mode Choose the method for connecting the terminal with the operator in the pull-down menu. Apply Button Enables the changes made on this screen.
If the connection method is set to manual connection or adapt mode, seeking is performed to locate connectable operators and the results are listed. The operators to be connected can then be selected from this list. Alternatively, a connection can be established with an operator by directly inputting their operator ID. Figure 3.140 Connect mode Choose the method for connecting the terminal with the operator in the pull-down menu. Scan operator This retrieves operators which can be connected (default).
Status Tab This tab displays the following information on the signal strength, operator connection and network. Figure 3.141 Current This indicates the current received signal strength. Name This displays the name of the operator who is currently connected. ID This displays the ID of the operator who is currently connected. Status This displays one of the current statuses for the WAN module.
Network Entry Tab This tab is for setting the Access Point Name of the service provider. Entry Input a connection name. Service Provider(APN) Input the Access Point Name from the service provider. Apply Button This button applies the settings entered in this tab. For use of this tab in detail, refer to Establishing GPRS Connection. Version Tab This tab displays the WAN configuration version.
Establishing GPRS Connection To establish GPRS connection, follow the steps below. 1. Configure the WAN power to ON using the WAN Settings tool. 2. Set the SIM lock disable using the WAN Settings tool. 3. Choose the operator using the WAN Settings tool. 4. Create a new connection using the WAN Settings tool. 5. Edit the connection settings using the Connections tool. 6. Establish GPRS connection using the Connections tool.
Step 2: Set the SIM lock disable using the WAN Settings tool 1. Dismount the check from the Enable SIM Lock. If the SIM lock mode is set effect, reset the PIN lock by inputting the correct PIN code in Security tab. The SIM lock mode is reset. 2. If the current SIM lock status shows “UnLock” in State field (see Figure 3.143), it is not necessary to reset the PIN lock because the PIN lock function is not used. Figure 3.143 3. If the current SIM lock status shows “PIN” in State field (see Figure 3.
Step 3: Choose the operator using the WAN Settings tool 1. Choose your suitable operator in Connect mode field (see Figure 3.145) to establish connection with the terminal by enumerating in Operator tab. Auto mode: The Auto mode is to establish connection with an operator by referring to the operator list saved in the SIM card. If you wish to set your operator in this mode, choose Auto in Connect mode combo box and tap Apply button. Figure 3.145 Manual mode: Choose Manual in Connect mode pull-down menu.
Adaptive mode: Choose Adapt in Connection mode pull-down menu. Follow the setting procedure detailed in the Manual mode to choose your operator. With this Adaptive mode, if you fail to establish connection, the connection mode is automatically changed to the Auto mode. Figure 3.147 Step 4: Create a new connection using the WAN Settings tool 1. On the WAN Settings screen, select Network Entry tab. 2. Specify a connection name in the ENTRY edit box. 3.
Step 5: Edit the connection settings using the Connections tool. 1. Navigate to Start → Settings → Connections tab and then double tap Connections icon. Figure 3.149 2. Under My Network, tap Manage existing connections. The connection name specified in step 4 appears. Figure 3.150 3. Tap Edit... button. The screen shown below appears. Figure 3.
4. Tap Next. The screen shown below appears. Figure 3.152 5. Tap Next. The screen shown below appears. Figure 3.153 6. Specify User name, Password, and Domain if required by the service provider. 7. Tap Advanced button. The screen shown below appears. Figure 3.
8. Check Use specific IP address checkbox and set IP address if required by the service provider. 9. Tap Servers tab. The screen shown below appears. Figure 3.155 10. Check Use specific server address checkbox and set IP addresses if required by the service provider. 11. Tap ok to return. 12. Tap Finish. Step 6: Establish GPRS connection using the Connections tool 1. Navigate to Start → Settings → Connections tab and then double tap Connections icon. Figure 3.156 2.
3. Tap and hold the connection name until a popup menu appears. Select Connect. Figure 3.157 4. When the connection is established, the icon in the title bar changes to the icon. To icon. A balloon window shown below appears. confirm the status of the connection, tap the Now you can communicate with the operator via TCP/IP. Figure 3.
3.37 Wireless Manager This applet is for enabling, disabling, and configuring all the wireless capabilities. Figure 3.
3.38 Wireless Configuration This applet is used to configure wireless networks. Wireless Tab Figure 3.160 Network Adapters Tab This tab is used to configure network adapters. Figure 3.161 Note: In some cases, this tab appears as the “Network Cards” applet.
3.39 WLAN Power This applet is to set up the settings for power to the integrated WLAN module and to display the detected status of the power. Figure 3.162 WLAN Power Enable Check this box to supply the power to the integrated WLAN module.
3.40 WLAN Settings This applet is to set up the parameters for WLAN configuration. The WLANConfig setting tool starts up by displaying the WLAN settings stored in the ini file if it exists in the terminal, or the default WLAN settings if the file does not exist, and then displays IP tab. IP Tab Figure 3.
Basic Tab This tab sets up SSID and Security. Click the radio button of Authentication to set “Open” for WEP. Choose either 128 bit radio button or 64 bit radio button for Key Length. For Key Index, up to four kinds of key can be registered. Figure 3.164 Search Button This button invokes the NetSearch utility. Security, Authentication Choose one of the four radio buttons in the Security field. By clicking WPA or WPA2 radio button, authentication in either PSK, EAP-PEAP, or EAP-TLS can be set up.
If EAP-PEAP or EAP-TLS is selected, user name, domain validate server, and etc. can be set up. Figure 3.166 WLAN Tab This tab sets up the basic WLAN settings such as power to the WLAN module, power save mode, WLAN standard, and the threshold level (RSSI level) of roaming. Figure 3.
Detail Settings Tab This tab sets up the detailed settings. It sets up whether or not to show popup window when WLAN is not connected to a network. AdHoc connection, all security settings and a comment for the configuration file (“ini” file) can also be set up. For Advance Settings and Version buttons, refer to the explanation below. Figure 3.168 Advance Settings Button This button displays a window of Advance Settings. The window sets up frequency channels from nos.
Version Button This button displays version information about the application currently running. Figure 3.170 If ok button in Figure 3.169 is clicked, following “Inifile Save Options” screen appears. This screen is to save the settings you made on each tab of Basic, IP, WLAN, and Detail of the WLANConfig tool. Clicking OK button saves the settings made on the four tabs to the ini file, and then starts up the terminal to run in WLAN operation.
4. Application Programs Once an application program is launched by navigating to Start → Programs menu, the application’s operation menu is displayed to continue the process. The following are the application programs implemented in the terminal Table 4.1 Name Today Description Default screen CASIO -- MS Yes Games Solitaire and Bubble Breaker -- Yes ActiveSync ActiveSync client -- Yes Backup Tool Backs up and restores user data to/from FlashDisk.
Messaging Electronic mail client -- Yes Messenger Windows Live Messenger -- Yes Mobile Camera Captures and displays static images. Yes -- NetSearch Displays a list of partners via WLAN. Yes -- Notes Takes a quick note. -- Yes Pictures & Videos Shows digital pictures & videos. -- Yes Remote Desktop Mobile Search Remote desktop client. -- Yes Searches for files and other items. -- Yes Task Manager Displays running programs.
4.1 Today When you turn on the terminal for the first time each day, you'll see the Today screen. You can also display it by tapping the Today's icon. On the Today screen, you can see important information at a glance for the day. Figure 4.
4.2 Games The terminal comes with two games; Solitaire and Bubble Breaker. Figure 4.
4.3 ActiveSync This application is an ActiveSync client program for the terminal to communicate with PC. Figure 4.
4.4 Backup Tool This tool backs up user’s data into the memory card and then restores it to deploy the backed up data in the terminal. Applicable data for backup and restoration with the tool • Files on the FlashDisk (except OS components) • Registry • Received mails • Cookie of browser and temporally files • Certificates Note: Changed sizes of the memory area, password and stylus correction related information are not backed up.
2. If you require a password to set in the screen appeared after clicking Backup now button, enter a password in Password field and then press F3 key (= Tab key) to confirm. Enter the same password in Confirm Password field and then press F2 key (= Back Tab keys). Click Yes button to complete the entering of password. Otherwise No button to return to the previous screen. 3. If you choose Yes button in the step above, Backup in Progress screen appears and the backup process is initiated.
Restoration Process 1. Press Restore now button. Figure 4.7 2. Enter the same password in Password field if it has been set up at a time of the backup process and click Yes button. Or, click No button to return to the previous screen. Figure 4.
3. If you choose Yes button in Figure 4.8, Restore in Progress dialogue screen appears indicating the initiation of restoration. While this screen is being appeared, do not operate any key on the keyboard or on the right and left sides. Figure 4.9 4. When the restoration is complete, a buzzer sounds in a short period indicating the completion. Click ok button in the popup message screen and X button at upper-right corner in the screen to close the tool. Figure 4.
Initiating the tool at command line The following explains how to initiate the backup tool at command line. CF_Backup.exe
Troubleshooting Table 4.2 Error messages Process Error message Backup Memory backup was cancelled because no storage card is loaded or because of insufficient storage card capacity. Correct the problem and try again. An error occurred while writing the backup file to card. Return to the menu, delete the backup file that was created, and try again. Memory backup was cancelled due to low battery power! Replace batteries and try it again. Restoration Restore failed because the data file could not be written.
4.5 Calculator The application can be used to operate nine-digit calculator. Figure 4.
4.6 Calendar Calendar is a program that helps you manage your schedule. Appointments and meetings in the Calendar can be viewed using a variety of different formats, and you can set alarms to notify you of upcoming appointment times. Figure 4.12 To create a new Appointment, navigate to Menu → New Appointment.
Table 4.3 Menus in the application Menu Description Day Switches to the Day view. Week Switches to the Day view. Month Switches to the Week view. Year Switches to the Month view. Agenda Switches to the Agenda view. Menu New Appointment Creates a new Appointment. Beam Appointment ... Sends the selected Appointment via IrDA or Bluetooth. Delete Appointment Deletes the selected Appointment. Reply Reply Replies the meeting notice. Reply All Replies the meeting notice to all attendees.
4.7 Contacts Use Contacts to store and manage the names, addresses, phone numbers, and email addresses of friends, co-workers, customers, etc. Figure 4.13 To create a new Contact, tap New. To find a contact, do one of the following: • Begin entering a name in the provided text box until the contact you want is displayed. • Use the alphabetical index displayed at the top of the contact list. • Filter the list by category. In the contact list, navigate to Menu → Filter. Table 4.
4.8 Copy Devices This application copies various settings and applications installed in one terminal (master terminal) to another (child terminals). Contents to be copied Table 4.5 Objective Content Remarks FlashDisk All files (except OS components) in the FlashDisk. Note: To make the master terminal and child terminals in the mirror state, the content in FlashDisk must be reset prior to performing Copy Devices.
2. The following screen appears while the master terminal is transmitting data. Figure 4.15 On child terminals 1. To receive data from the master terminal, click Receive Start button on each child terminal (if multiple terminals are to receive the same data.). Figure 4.
2. On the child terminal, the following screen appears while the child terminal is receiving data. Figure 4.
4.9 File Explorer This application is a file management program. It can copy files, transmit files, delete files, create folders and delete folders. Figure 4.18 Table 4.6 Menus in the application Menu Description Up Opens the parent folder. Menu Go To My Documents Opens the My Documents folder. My Device Opens the root folder. Folders ... Opens the upper folder. Open Path Opens the network share. Refresh Updates the list with latest information. Show All Files Displays all files.
4.10 FLCE This application enables the terminal to communicate with a PC with the LMWIN utility being running. The communication between the terminal and the PC is established via cradle. Input Command Line Screen Figure 4.19 Screen during Transmission While the communication continues, the following screen will appear. Refer to LMWIN Utility Manual available separately for detail of the operation. Figure 4.
4.11 Getting Started This application displays shortcut menus for setting up the terminal. Figure 4.
4.12 GPS Information This application displays the positioning information and satellite information retrieved by the GPS module integrated in the terminal (model dependant). Status Tab This tab displays the information of the satellite from which the signal is being received. Figure 4.22 Quality This displays the object subject to positioning. ”GPS” is displayed if the power to the GPS module is on. Selection ”Auto” is displayed if the power to the GPS module is on.
Position Tab This tab displays the position of the satellite from which the signal is being received. Figure 4.23 Latitude This displays the latitude of the positioning results. Longitude This displays the longitude of the positioning results. Heading This displays the traveling direction of the positioning results. Speed This displays the traveling speed of the positioning results. Always North top In the Check mode, the displayed direction is always shown with north on top.
4.13 Image Scanner Demo This application demonstrates the performances of reading 1D and 2D symbologies with the integrated CMOS Imager (applicable to models with the integrated Imager). The application consists of four menus; - Single Decode - Multi Decode - Image Capture - Sign Capture Single Decode This mode reads a single bar code symbol every time one of the Trigger keys is pressed and then displays scanned bar code, symbology name and the no. of digits. To exit this mode, tap Quit button. Figure 4.
Image Capture This mode captures an image through the CMOS Imager. Pressing the Trigger key first time displays preview of image and then capture the image when the key is pressed second time to save it in JPEG format in a storage area which is indicated at the lower part of the screen. Figure 4.26 Sign Capture This mode reads bar code symbol and captures signature both located in the same vicinity and then displays its result and captured signature on the screen. Figure 4.
4.14 Image Scanner Read After scanning 1D bar code symbol or 2D code symbol with the integrated Imager, a result of the scanning is output to application. The output method as well as other relevant parameters for scanning can be determined by the settings made in “Imager Setting”. To display the Settings menu, tap the ( ) icon in the Taskbar and then choose Settings. Operation Procedures 1. Navigate to Start → Programs → Image Scanner Read icon.
4.15 Internet Explorer This application displays web pages on the Internet and Intranet. Figure 4.29 Table 4.7 Menus in the application Menu Description Favorites Displays the Favorites menu. Menu Favorites Displays the Favorites menu. Add to Favorites Adds the current page to the Favorites menu. Go to Web Address Focuses on the Address Bar. Zoom Out Displays the current page smaller. Home Page Returns to the homepage. History Changes the display to a page listed in the history.
4.16 Internet Sharing This application enables your PC to use the terminal as a modem for connecting to the Internet. Figure 4.30 If your terminal has a data connection plan, your PC can use the terminal to connect to the Internet. To use the terminal as a modem using a USB cable, follow the steps below. 1. On your PC, open ActiveSync, and navigate to File → Connection Settings. 2. Clear the Allow USB connections checkbox. 3. 4. 5. 6. 7. Connect the terminal to the PC using a USB cable.
4.17 Laser Scanner Demo This application demonstrates the following scanning functions. • Automatic permission of setting readable bar code symbologies • Scanning bar codes using Trigger key. • Displaying scanning results. Figure 4.31 Codes appeared in the BarCode Type field (see Figure 4.31) refer to the respective symbologies listed in the table below. Table 4.
Notes: 1. EAN-128 symbology changes its name to “GS1-128”. 2. The RSS symbologies change its name to “GS1 DataBar xxxx”.
4.18 Laser Scanner Read After scanning a bar code with the integrated Laser Scanner (model dependant), a result of the scanning is output. The output method for the scanning result is defined by the settings made in “Scanner Setting”. Operation Procedures 1. Navigate to Start → Programs → Laser Scanner Read icon. The ( the Taskbar indicates that the scanning application is being started up. ) icon appeared in Figure 4.32 2. Start up an application that receives a result of scanning bar code. 3.
4.19 Messaging This application sends and receives electronic mail that supports the POP3 or IMAP4. Figure 4.33 To set up a new account, see “Setting up an e-mail account”.
Message List Screen Figure 4.34 Table 4.9 Menus in the Message List Screen Menu Description Delete Deletes the selected message. Menu New Creates a new message. Reply Reply Replies to the selected message. Reply All Replies to sender and CC'ed recipients of the selected message. Forward Forwards the selected message. Mark as Read Marks the selected message as read. Move ... Moves the selected message to other folder. Go to Folders ... Changes current folder.
Viewing Screen Figure 4.35 Table 4.10 Menus in the Viewing Screen Menu Description Reply Replies to the message. Menu Delete Deletes the message. Reply Reply Replies to the message. Reply All Replies to sender and CC'ed recipients of the message. Forward Forwards the message. Mark as Unread Marks the message as unread. Move ... Moves the message to other folder. View Text Size Changes the text size. Language Changes the language. Download Message Downloads current message with attachments.
Writing Screen Figure 4.36 Table 4.11 Menus in the Writing Screen Menu Description Send Sends the message. Menu Add Recipient ... Adds another contacts to recipient. Check Names Searches for name stored in Contacts. Insert Picture Inserts a picture into the message as attachment. Voice Note Inserts a voice mail into the message as attachment. File Inserts a file into the message as attachment. My Text Inserts a preset or frequently used phrase. Save to Draft Saves the message to Draft folder.
Setting up an e-mail account To set up an e-mail account, follow the steps below. 1. Navigate to Setup E-mail or navigate to Menu → Tool → New Account. The screen shown below appears. Figure 4.37 2. Enter your E-mail address and Password. 3. Tap Next. The screen shown below appears. Figure 4.38 4. To allow Auto configuration to connect to the Internet, obtain e-mail server settings (if possible) and enter this information for you, select Try to get e-mail settings automatically from the Internet checkbox.
6. When Auto configuration has finished, tap Next. The screen shown below appears. Figure 4.39 7. Enter Your name (the name you want displayed when you send e-mail) and Account display name that displays in Messaging. 8. Tap Next. The screen shown below appears. Figure 4.40 9. Select the intervals for downloading new messages from the Automatic Send/Receive pull-down menu. 10. Tap Finish. Before tapping Finish, you can tap Options to access additional settings.
If Auto configuration is unsuccessful or if you have an account you access using a VPN server connection, contact your ISP or network administrator for the following information and enter it manually: Table 4.
4.20 Messenger You can use Windows Live Messenger on the terminal to chat with friends or co-workers. You must have a Windows Live ID and password to use this service. Figure 4.
4.21 Mobile Camera This application captures static images. Figure 4.42 Portrait Screen Figure 4.43 Landscape Screen The orientation of static image is depending on the screen orientation of the terminal. See “Screen” settings. Table 4.13 Buttons in the top Toolbar Button Description Brightness Setting Opens Brightness Setting screen. List View Launches “Pictures & Videos” application. Folder Changes the folder to which captured image will be saved. Table 4.
Table 4.15 Buttons in the right Toolbar Button Description Trapezoidal Correction Changes the trapezoidal correction to “Correct” or “Don’t correct”. Size Magnification Chooses a capture size from “UXGA”, “QUADVG”, “XGA”, “SVGA”, “VGA” and “1/4VGA”. Chooses an image quality from “Bitmap”, “Fine”, “Normal” and “Economy”. Chooses a magnification from “1.0” and “1.5”.
4.22 NetSearch This application displays a list of partner stations communicable with the terminal via WLAN. • Partner stations on the list can be sorted in the order of field intensity, station name and channel. • Field intensity for the partner station currently being established with the terminal is displayed in green. • The information appeared in the screen is updated every five seconds. • The remote station’s WLAN standard IEEE802.11 b/g icon is displayed at the head of the station name.
Detail information about partner station The screen displays the following detail about the partner station. SSID WLAN standard No. of channels operable Intensity (%) Encryption MAC address Status IP address Physical address Navigate to Start → Programs → Communication → NetSearch icon to initiate the screen. Figure 4.
Detail Button This button displays the log of IP in detail. Figure 4.46 Ping(4) Button This button (see Figure 4.45) displays the PingUtility screen. Figure 4.
Signal(5) Button This button (see Figure 4.45) displays the signal strength in dBm and with a yellow straight line that also indicates the signal strength in percent for the operator to judge if the signal in air is ample enough to continue WLAN operation Figure 4.48 Options Screen Navigate to Start → Program → Communication → NetSearch icon → Display and then choose Options in the menu to display following screen. Figure 4.
4.23 Notes This application enables you to jot a quick note. Figure 4.50 To create a new note, tap New. To edit an existing note, tap the file name. Table 4.17 Menus in the List view Menu Description New Creates a new note. Menu View Recording Toolbar Shows or hides Recording Toolbar. Rename/Move Renames or moves the selected notes. Delete Deletes the selected notes. Create Copy Creates a copy of the selected note. Select All Selects all notes in the list. Send ...
Editing Screen Figure 4.52 Table 4.18 Menus in the Editing Screen Menu Description New Creates a new note. Menu View Recording Toolbar Shows or hides Recording Toolbar. Draw Turns Draw mode on or off. Undo Undoes the last action. Redo Redoes the last Undo command. Cut Cuts the selected items in the current note. Copy Copies the selected items in the current note. Paste Pastes the items that are cut or copied. Edit Clear Deletes the selected items in the current note.
4.24 Pictures & Videos This application enables you to view and share digital pictures & videos. Figure 4.53 To view picture and video clips, tap the picture or video clip to view. To take a photo, do one of the following: • Tap Camera icon. • Tap Camera on the command bar. • Navigate to Menu → Camera.
Table 4.19 Menus in the List view Menu Description Camera Launches “Mobile Camera” application. View Displays the selected picture. Menu Camera Launches “Mobile Camera” application. Send ... Creates a new e-mail message with the selected file attached. Beam ... Sends the selected file via IrDA or Bluetooth. Save to Contacts ... Attaches the selected picture to the Contact item. Delete Deletes the selected picture or video. Edit Cut Cuts the selected picture or video.
Viewing Screen Figure 4.54 To edit the picture, navigate to Menu → Edit. Table 4.20 Menus in the Viewing Screen Menu Description Send Creates a new e-mail message with the picture attached. Menu Zoom Opens the sub window for zooming the picture. Play Slide Show Plays pictures as slide show. Set as Today Background ... Sets current picture as a Today's wallpaper. Beam Picture Sends current file via IrDA or Bluetooth. Save Save to Contacts ... Attaches current picture to the Contact item. Save As ...
Editing Screen Figure 4.55 Table 4.21 Menus in the Editing Screen Menu Description Rotate Flips the picture 90 degree. Menu Crop Crops the picture by drawing a box. Auto Correct Adjusts the brightness and contrast levels of the picture. Undo Undoes the last action. Revert to Saved Reloads the last version of the image from the file. Save As ... Saves the picture with new name.
4.25 Remote Desktop Mobile This application is the RDP6.0 based remote desktop client. Figure 4.56 The following is the procedure. 1. Do the following: • In Computer, enter the name of the computer to which you want to connect. • Enter your User name and Password. • Enter Domain, if required. • Select Save password. 2. Tap Connect. To improve display performance for Remote Desktop Mobile, tap Options to change the parameters.
4.26 Search The application can search for files and other items stored on the terminal in the My Documents folder or on a storage card. Figure 4.57 To search for a file or an item, follow the steps below. 1. Enter the file name, word, or other information you want to Search for field. 2. In Type pull-down menu, select a data type to help narrow your search. 3. Tap Search.
4.27 Task Manager This application is used to view running tasks, switch tasks, and stop tasks. See 3.26 “Task Manager” for detail.
4.28 Tasks This application lets you keep track of jobs and tasks you need to do. Figure 4.58 To create a new Appointment, tap Tap here to add a new task or navigate to Menu → New Task. Table 4.22 Menus in the application Menu Description Complete Marks the selected Task as completed. Menu New Task Creates a new Task. Beam Task ... Sends the selected Task via IrDA or Bluetooth. Delete Task Deletes the selected Task. Edit Cut Cuts the selected Task. Copy Copies the selected Task.
4.29 Windows Live You can use Windows Live on the terminal to find information on the web. You must have a Windows Live ID and password to use this service. Figure 4.
4.30 Windows Media The terminal includes Windows Media Player Mobile, a program that plays music and videos. It can play media files that are stored on the terminal as well as songs and videos that you stream from the Internet. The media player also plays streaming TV, if this service is available from your provider. Windows Media Player Mobile also helps you organize your media files. After you save media files to your terminal, you can create playlists of both music and video files.
Playing Screen Figure 4.61 Table 4.24 Menus in the Play Screen Menu Description Now Playing Switches to Now Playing Screen. Menu Library Switches to Library view. Play/Pause Starts or pauses the playing of a file. Stop Ends the playing of a file. Shuffle/Repeat Shuffle Plays the playlist randomly. Repeat Plays the playlist repeatedly. Full Screen Hides the main menu, toolbar, etc. Options ... Sets up options for playing. Properties Displays the property of the current file.
Now Playing Screen Figure 4.62 Table 4.25 Menus in the Now Playing Screen Menu Description Play Plays the selected file. Menu Library Switches to Library view. Move Up Moves the selected file up in the playlist. Move Down Moves the selected file down in the playlist. Remove from Playlist Removes the selected file from the playlist. Shuffle/Repeat Shuffle Plays the playlist randomly. Repeat Plays the playlist repeatedly. Save Playlist Saves the playlist.
5. Utilities The utilities listed in the table below are mainly used as a co-process or auxiliary program in user applications. Table 5.1 Utility FCHKCE Auto Setup TextEditor CT Client DiskClean Description Confirms a result of data upload/download. Carries out automatically application at time of reset on the terminal. Rich text editor Measures the WLAN communication status. Format user disk and initialize RAM as the same status of the factory prior to shipment.
5.2 Auto Setup This utility automatically sets up a specified application. Execution Timing The timing for executing “Auto Setup” is as follows. When the terminal is reset; The utility carries out Setup.exe in the FlashDisk. Location of application for automatically stating up with Auto Setup Location of applications to be automatically set up with this utility is CE\ARM folder of the FlashDisk.
5.3 TextEditor This utility can display and edit text files such as log files and ini files. Figure 5.1 Table 5.3 Menus in the application Menu Description File New Creates new text. Open … Displays existing document file. Save Saves document file by overwritten. Save As … Saves document file with a specified name. Recent Files Displays recently displayed document file names. Version Displays version information. Edit Undo Restores the previous operation. Cut Cuts document in the selected range.
5.4 CT Client This utility performs status checking in the WLAN communication together with PC based server. Note: Refer to the “WLAN Survey Tool” manual for detail.
5.5 DSKClean This utility formats the user disk and initializes RAM to the factory condition, and reloads OS again from OS disk. This procedure is called User Disk Clear. See “Reset” for detail. Starting Up the User Disk Clear 1. Double tap DSKClean.exe located under Windows folder. Then screen shown in Figure 5.2 appears. Tap OK button to continue the rest of the operation. Figure 5.2 2. The screen below appears to confirm the operation. Tap OK button to continue. Figure 5.
3. The screen below appears, and then approximately 5 seconds later formatting the user disk and initializing RAM will automatically start. Figure 5.4 4. After formatting the user disk and initializing RAM are complete, the terminal suspends and resumes automatically to reload the OS from the OS disk.
6. PC Application Programs The following are applications run on the host PC which is linked to the terminal. Table 6.1 Application ActiveSync Windows Mobile Device Center LMWIN FCHK MS; Microsoft. Description Carries out data link with the terminal. Carries out data link with the terminal. Carries out data upload/download. Checks and confirms a result data upload/download. CASIO --- MS Yes Yes Yes Yes --- 6.
6.3 LMWIN This utility interoperates with the FLCE installed in the terminal to perform data upload and download. It is an option available separately. See LMWIN Utility manual for detail. 6.4 FCHK This utility checks and confirms results of data upload/download. See LMWIN Utility manual for detail.
