E Digital Camera User’s Guide K1123PCM1DMX Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.
Unpacking As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Digital camera Rechargeable lithium ion battery (NP-70) Charger unit (BC-70L) To attach the strap to the camera Attach strap here. * The shape of the power cord plug varies according to country or geographic area.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 âťšâť™ Quick Start Basics 8 What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 First, charge the battery prior to use..
âťšâť™ Using BEST SHOT 44 What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 âťš Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 âťšâť™ Advanced Settings 47 Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 REC Mode Settings . . . . . . . . . . .
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . . 68 Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming) . . 69 Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Dubbing) . . 69 âťš To play snapshot audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 104 âťšâť™ Configuring Monitor Screen Settings 105 Using the On-screen Histogram to Check Exposure . . . . . . . . . . . . . . . . . . 105 âťš How to Use the Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 âťšâť™ Appendix 107 Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Power Supply. . . . . . . . . . . . . . . . . . .
Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. Record Delete Play You can use the images you record in a variety of different ways. Store images on your computer. Print images. 8 Attach images to e-mail.
What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions. Face Detection Point the camera at a person and it automatically detects the person’s face for beautiful portraits every time. See page 28 for more information. Anti Shake The camera corrects automatically to minimize image blur due to camera movement and highspeed subject movement.
First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps under “To charge the battery” to bring the battery to a full charge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-70) for power. Never try to use any other type of battery. To charge the battery 1. Positioning the positive + and negative - terminals of the battery with those of the charger unit, load the battery into the charger unit. 2.
Other Charging Precautions • Use the special charger (BC-70L) to charge the special lithium ion battery (NP-70). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident. • A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it. • A battery discharges slightly even when it is not loaded in the camera.
Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Battery Indicator Indicator Color Cyan Low * * * Amber * * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
Configuring the Display Language the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. [ON/OFF] [BS] =8? =4? =2? =6? [SET] 1. Press [ON/OFF] to turn on the camera. 2. Use [8], [2], [4], and [6] to select the language you want and then press [SET]. 3.
Preparing a Memory Card Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory. • For information about memory card capacities, see page 131.
IMPORTANT! • Never insert anything besides a supported memory card (page 14) into the memory card slot. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center. To format (initialize) a new memory card You need to format a new memory card before using it for the first time. 1. Turn on the camera and press [MENU]. 2.
Turning the Camera On and Off To turn power on To enter the REC Mode, press [ON/OFF] (Power) or [r] (REC). To enter the PLAY mode, press [p] (PLAY). The back lamp will light (green) momentarily and the camera will turn on. If you are entering the REC mode, the lens will extend from the camera at this time. • Take care to ensure that nothing is restricting or coming into contact with the lens as it extends. Holding the lens with your hand so it cannot extend creates the risk of malfunction.
To shoot a snapshot 1. Press [r] (REC) to turn on the camera. Make sure R is on the display. If it isn’t, see page 44. Snapshot mode icon Monitor screen Shutter button [r] (REC) 2. Point the camera at the subject. You can zoom the image, if you want. Zoom Controller 3. Half-press the shutter button to focus the image. w Wide Angle Back lamp z Telephoto Focus frame When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.
4. Continuing to keep the camera still, press the shutter button the rest of the way down. This records the snapshot. Full-press Shooting a Movie [0] Press [0] to start movie recording. Press [0] again to stop movie recording. See page 40 for details. Snap (Image is recorded.) IMPORTANT! • While the “Anti Shake” setting is “D Auto” or “A Camera AS”, half pressing the shutter will cause the camera to vibrate and emit an operation sound. This is normal and does not indicate malfunction (page 30). .
Holding the Camera Correctly Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases.
Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 62. 1. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory. • Information about the displayed snapshot also is included (page [p] (PLAY) 122). • You also can clear the information to view only the snapshot (page 105).
Deleting Images If memory becomes full, you can delete images you no longer need to free up storage and record more images. • Remember that a file (image) delete operation cannot be undone. • Deleting an audio snapshot (page 69) deletes both the snapshot and the audio file. To delete a single file 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). 2. Use [4] and [6] to scroll through the files until the one you want to delete is displayed. 3.
Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc. • If unwanted light is shining directly onto the lens, shade the lens with your hand when shooting an image.
Snapshot Tutorial Using the Control Panel The Control Panel can be used to configure camera settings. 1. In the REC mode, press [SET]. This will cause a Control Panel to appear along the right side of the monitor screen. The settings available for the currently selected Control Panel also appear. You can use the control panel to configure various camera settings. • If “On” is selected for the Panel setting (page 97), the Control Panel is always displayed along the right side of the monitor screen.
Changing the Image Size (Size) . Pixels A digital camera image is a collection of small dots called “pixels”. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer pixels when printing an image (L size) through a print service, attaching an image to e-mail, when viewing the image on a computer, etc. Pixel .
. To select the image size 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the top Control Panel option (Image Size). 3. Use [4] and [6] to select an image size and then press [SET]. Image Size (Pixels) Suggested Print Size and Application 8M (3264x2448) A3 Print 3:2 (3264x2176) A3 Print 16:9 (3264x1840) HDTV 6M (2816x2112) A3 Print 4M (2304x1728) A4 Print 2M (1600x1200) 3.5"x5" Print Best when preserving memory capacity is relatively more important than image quality.
Using Flash (Flash) 1. In the REC mode, press [2] ( ) to select the flash setting you want. Each press of [2] ( ) cycles through the available flash settings. • If “On” is selected for the Panel setting (page 97), you can change the flash setting by pressing [2] ( ) once, using [4] and [6] to select the setting, and then pressing [SET]. 2. Flash [2] ( ) > Auto Flash Flash fires automatically in accordance with exposure (amount of light and brightness) conditions. ? Flash Off Flash does not fire.
NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time depends on operating conditions (battery condition, ambient temperature, etc.) With a fully charged battery it takes anywhere from a few seconds to 6 seconds. • Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement.
Using Face Detection (Face Detection) The face detection feature adjusts focus and brightness to the faces in the image. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the third Control Panel option from the top (Face Detection). 3. Use [4] and [6] to select “G Face Detection: On” and then press [SET]. 4. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5. Half-press the shutter button.
Tips for Best Face Detection Results • The camera performs center focus if it cannot detect a face. • Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face detection. • Face detection may take a bit longer when you hold the camera sideways. • Detection of the following types of faces is not supported. – Face that is obstructed by hair, sunglasses, a hat, etc.
Reducing the Effects of Camera and Subject Movement (Anti Shake) You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature.
NOTE • Anti Shake is disabled during movie recording. • ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while “D Auto” is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot. • The ISO sensitivity setting (page 32) must be “AUTO” for “S Image AS” to work.
Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (ISO Sensitivity). 3. Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions ISO 64 Lower sensitivity Slow shutter speed Less noise ISO 1600 Higher sensitivity Fast shutter speed (Set for shooting in dimly lit areas.
3. Use [4] and [6] to select the shooting condition you want and then press [SET]. ‡ Auto WB Configures the camera to adjust white balance automatically ¤ Daylight For shooting outdoors on a clear day ' Overcast For shooting outdoors on an overcast rainy day, in the shade, etc.
Correcting Image Brightness (EV Shift) You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0EV to +2.0EV • Unit: 1/3EV 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the third Control Panel option from the bottom (EV Shift). 3. Use [4] and [6] to adjust the exposure compensation value. [6]: Increases the EV value. A higher EV value is best for light-colored subjects and backlit subjects. [4]: Decreases the EV value.
Using the easy Mode The easy mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital imaging. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the second Control Panel option from the bottom (easy Mode). 3. Use [4] and [6] to select “| On” and then press [SET]. This enters the easy mode. 4. Focus the image. While the focus frame is aligned with the subject, half-press the shutter button. 5. Shoot the image.
. Using the easy Menu The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode. While the camera is in the easy mode, all the other settings (besides Flash, Selftimer, Image Size, and easy Mode) on the REC tab menu (page 123) and Quality tab menu (page 124) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode. IMPORTANT! • To use the Set Up tab menu (page 124), you need to exit the easy mode.
3. Use [8] and [2] to select the setting you want, and then press [SET]. Menu Item: Available Settings: Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off) Self-timer • (10-second self-timer) / l* Image Size (* / $ / ! easy Mode k / l* Exit Menu Exit the easy menu • An asterisk (*) indicates reset default settings. • See the following for details. – Flash (page 26) – Self-timer (page 53) – Image Size (page 24) • The following are the settings you can select for “easy Mode”.
Changing the Control Panel Date/Time Style 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time. NOTE • You can select either of two display style (page 100) for the date: Month/Day or Day/Month. • The time is displayed using 24-hour format.
Shooting with Zoom Your camera provides you with 4X optical zoom (that changes the lens focal distance). 1. In the REC Mode, slide the zoom controller to zoom. w Wide Angle z Telephoto Zoom Controller z (Telephoto) : Enlarges the subject and narrows the range w (Wide Angle) : Reduces the size of the subject and broadens the range 2. Press the shutter button to shoot the image. NOTE • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto.
Recording Movie Images and Audio To record a movie 1. Configure the quality setting for the movie (page 59). The length of the movie you can record will depend on the quality setting you select. 2. In the REC mode, press [0] (Movie). This will start recording and display Y on the monitor screen. Movie recording includes monaural audio. 3. Remaining recording time Press [0] again to stop recording. • Each movie can be up to 10 minutes long.
NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc. – Good recording results are not possible when the camera is too far away from what you are Microphone trying to record.
Recording Audio Only (Voice Recording) Voice Recording lets you record audio only, without a snapshot or movie. You can record about 53 minutes and 45 seconds of Voice Recording using the camera’s built-in memory only. 1. In the REC mode, press [BS]. 2. Use [8], [2], [4], and [6] to select the ` (Voice Recording) scene and then press [SET]. This causes ` to appear on the monitor screen. 3. Press the shutter button to start recording.
About audio data • Audio files can be played back on a computer using Windows Media Player or QuickTime (pages 85, 93) – Audio Data: WAVE/IMA-ADPCM (WAV extension) – Audio File Size: Approximately 165KB (Approximately 30 seconds of recording at 5.5KB per second) To play back an audio recording 1. In the PLAY mode, use [4] and [6] to display the Voice Recording file you want to play. ` is displayed in place of an image for a Voice Recording file. 2. Press [SET] to start playback.
Using BEST SHOT What is BEST SHOT? BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings.
3. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different BEST SHOT scene, repeat the above procedure from step 1. 4. Press the shutter button. NOTE • The BEST SHOT YouTube scene sets up the camera for recording movies that are optimized for uploading to YouTube.
. BEST SHOT Precautions • Selecting the Night Scene or Fireworks scene results in a slow shutter speed setting. Since a slow shutter speed increases the chance of digital noise in the image, the camera automatically performs a digital noise reduction process when either of these scenes is selected. This means that it will take a bit longer for the image to be saved which is indicated by the back lamp flashing green. Do not perform any key operation during that time.
Advanced Settings The following are menu operations you can use to configure various camera settings. • You also can use the Control Panel (page 23) to configure some of the settings that appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel. Using On-screen Menus . Example Menu Screen Operation Press [MENU] to display the menu screen. • Menu contents are different in the REC mode and PLAY mode.
3. Use [8] and [2] to select the menu item you want, and then press [6]. 4. Use [8] and [2] to change the setting. 5. After the setting is the way you want, press [SET]. • Pressing [4] registers the selected setting and returns to the menu. • To configure settings on another tab after pressing [4] to return to the menu, use [8] to move the highlighting up to the tabs, and then use [4] and [6] to select the tab you want. Example: When “Focus” is selected on the “REC” tab Tabs Settings .
REC Mode Settings (REC) Selecting a Focus Mode (Focus) Procedure [r] (REC) * [MENU] * REC Tab * Focus Settings Type of Shot Focus Mode Snapshot Q Auto Focus General recording Automatic ´ Macro Close ups Automatic E Pan Focus Shooting with a relatively wide focus range ) Infinity Scenery and other distant subjects W Manual Focus When you want to focus manually Movies Approximate Focus Range*1 Snapshot Movies Approximately 40 cm to 9 (infinity) (1.
*4 (m) Normal Macro Zoom Steps Close Up Telephoto Center distance Z1 (Wide) Approx. 1.6 (5.2') 9 0.20 (7.9") 2 Approx. 2.1 (6.9') 9 0.20 (7.9") 3 Approx. 2.8 (9.2') 9 0.20 (7.9") 4 Approx. 3.5 (11.5') 9 0.30 (11.8") 5 Approx. 4.3 (14.1') 9 0.30 (11.8") 6 Approx. 5.3 (17.4') 9 0.30 (11.8") 7 Approx. 6.1 (20.0') 9 0.40 (15.7") 8 Approx. 7.3 (24.0') 9 0.50 (19.7") 9 (Tele) Approx. 8.2 (26.9') 9 0.60 (23.6") NOTE • Above values are for reference only.
NOTE • Auto Focus can be used when recording snapshots only. • Whenever you perform an optical zoom operation while shooting with Auto Focus, Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell you the focus range, as shown below. Example: oo cm to 9 * oo is the actual focusing range value. • The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page 55) are disabled while Manual Focus is selected as the focus mode.
Using Continuous Shutter (Continuous) Procedure [r] (REC) * [MENU] * REC Tab * Continuous While Continuous Shutter is turned on, images are continually recorded until memory becomes full, as long as you keep the shutter button depressed. Releasing the shutter button stops shooting. NOTE • With continuous shutter, exposure and focus for the first image are applied for successive images as well. • Continuous shutter cannot be used in combination with any of the following.
Using the Self-timer (Self-timer) Procedure [r] (REC) * [MENU] * REC Tab * Self-timer With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. „ 10 sec 10-second Self-timer ‚ 2 sec 2-second Self-timer • When shooting under conditions that slow down the shutter speed, you can use this setting to prevent image blur due to camera movement.
Shooting with Face Detection (Face Detection) Procedure [r] (REC) * [MENU] * REC Tab * Face Detection For details, see the Control Panel procedure on page 28. Reducing the Effects of Camera and Subject Movement (Anti Shake) Procedure [r] (REC) * [MENU] * REC Tab * Anti Shake For details, see the Control Panel procedure on page 30. Specifying the Auto Focus Area (AF Area) Procedure [r] (REC) * [MENU] * REC Tab * AF Area U Spot This mode takes readings of a small area in the center of the image.
Using the easy Mode (easy Mode) Procedure [r] (REC) * [MENU] * REC Tab * easy Mode For details, see the Control Panel procedure on page 35. Assigning Functions to the [4] and [6] Keys (L/R Key) Procedure [r] (REC) * [MENU] * REC Tab * L/R Key You can assign one of the five functions listed below to the [4] and [6] keys.
Turning on Image Review (Review) Procedure [r] (REC) * [MENU] * REC Tab * Review While Review is turned on, the camera will display a image for about one second immediately after you press the shutter button to record it. Using Icon Help (Icon Help) Procedure [r] (REC) * [MENU] * REC Tab * Icon Help While Icon Help is turned on, a textual description will appear on the display for certain icons when you switch between REC functions.
Configuring Power On Default Settings (Memory) Procedure [r] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.
Image Quality Settings (Quality) Specifying Snapshot Size (Size) Procedure [r] (REC) * [MENU] * Quality Tab * Size For details, see the Control Panel procedure on page 25.
Specifying Movie Image Quality (Quality (Movie)) Procedure [r] (REC) * [MENU] * Quality Tab * » Quality (Movie) Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HQ) setting will result in better image quality, but it also shortens the amount of time you can shoot. Image Quality (Pixels) Approximate Data Rate HQ 640x480 Normal 640x480 6.1 Megabits/second 10.5 Megabits/second LP 320x240 2.
Specifying the Metering Mode (Metering) Procedure [r] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of the subject is metered for exposure. B Multi Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading. This type of metering provides error-free exposure settings for a wide range of shooting conditions.
Controlling Color Saturation (Saturation) Procedure [r] (REC) * [MENU] * Quality Tab * Saturation You can specify one of five saturation settings from +2 (most saturated) to –2 (least saturated). Adjusting Image Contrast (Contrast) Procedure [r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark).
Viewing Snapshots and Movies Viewing Snapshots See page 20 for the procedure for viewing snapshots. Viewing a Movie 1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. 2. Press [SET] to start playback. Movie icon: » Recording time Image quality Movie Playback Controls Fast forward/fast reverse [4] [6] • Each press of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, press [SET].
Zooming an On-screen Image 1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. 2. Slide the zoom controller towards z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Slide the zoom controller towards w to unzoom the image. – When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed.
Viewing Snapshots and Movies on a TV Screen 1. Use the AV cable that comes with the camera to connect it to the TV. Yellow TV White Video AV cable (bundled) Audio USB/AV port AUDIO IN jacks (white) VIDEO IN jack (yellow) Making sure that the 6 mark on the camera is aligned with the 4 mark of the AV cable connector, connect the cable to the camera. • Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place.
NOTE • Audio is monaural. • Certain TVs may cut off part of the images. • Before connecting to a TV to display images, be sure to configure the camera’s [r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 102). • Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required. • All icons and indicators that appear on the monitor screen also appear on the TV screen.
Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 47.
Selecting Images for Printing (DPOF Printing) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing See page 75 for details. Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Protect On Protects specific files. 1 Use [4] and [6] to scroll through the files until the one you want to protect is displayed. 2 Use [8] and [2] to select “On” and then press [SET]. An image that is protected is indicated by the › icon.
Rotating an Image (Rotation) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation 1. Use [8] and [2] to select “Rotation” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. 2. When the displayed image is at the orientation you want, press [MENU]. NOTE • Note that this procedure does not actually change the image data. It simply alters how the image is displayed on the camera’s monitor screen.
Cropping a Snapshot (Trimming) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained. Zoom factor Represents snapshot area Use the zoom controller to zoom the image to the size you want, use [8], [2], [4], and [6] to display the portion of the image you want to cut out, and then press [SET].
2. Press the shutter button again to stop audio recording. • Take care that you do not block the camera’s microphone with your fingers while recording. • Good recording results are not possible Microphone when the camera is too far away from what you are trying to record. • Your camera supports the following audio data formats. – Audio Format: WAVE/IMA-ADPCM (WAV extension) – Approximate Audio File Size: 165KB (Approximately 30 seconds of recording at 5.
Voice Recording Playback Controls Fast forward/fast reverse [4] [6] Play/pause [SET] Volume adjustment Press [2] and then press [8] [2] Display content switching [8] (DISP) Stop playback [MENU] • Audio of an Audio Snapshot also can be played back on a computer using Windows Media Player or QuickTime (pages 85, 93).
Printing Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer 1. Turn on the camera and press [MENU]. 2. On the “Set Up” tab, select “USB” and then press [6]. 3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET]. .
. To print 1. Turn on the printer and load paper. 2. Turn on the camera. This will display the print menu screen. 3. Use [8] and [2] to select “Paper Size”, and then press [6]. 4. Use [8] and [2] to select a paper size and then press [SET]. • The following are the available paper sizes. 3.5"x5", 5"x7", 4"x6", A4, 8.5"x11", By Printer • Selecting “By Printer” prints using a paper size selected on the printer. • See the documentation that comes with your printer for information about paper settings.
Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service. • Whether or not you will be able to use DPOF settings for printing depends on the printer you are using.
. Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images 1. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. • If you want to include the date in the images, press [BS] so “On” is shown for date stamping. 2. Press [SET]. DPOF settings are not cleared automatically after printing is complete.
. Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configure DPOF settings (page 75). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t. Configuring camera settings Configure the Camera’s Time Stamp setting (page 99). • The camera’s Time Stamp setting imprints the date into a snapshot when you shoot it, so the date is always included when you print.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there • Save images and view them manually (USB connection) (pages 81, 90). • Save images and view them automatically (Photo Loader with HOT ALBUM*) (page 84). Images will be grouped by recording date and displayed in a calendar format.
Using the Camera with a Windows Computer Install the required software in accordance with the version of Windows you are running and what you want to do. When you want to do this: Operating System Version Install this software: See page: Save images to a computer and view Vista / XP / 2000 them there manually Installation not required. 81 Save images to a computer automatically/ Manage images Vista / XP / 2000 Photo Loader with HOT ALBUM 3.1 DirectX 9.0c (When DirectX 9.
. Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the “Read me” file that comes with each application for details. Information about computer system requirements also can be found under “Computer System Requirements for Bundled Software” on page 119 of this manual. . Precautions for Windows Users • Photo Loader with HOT ALBUM, YouTube Uploader for CASIO, and Photo Transport will not run under 64-bit versions of Windows Vista.
Viewing and Storing Images on a Computer You can connect the camera to your computer in order to view and store images (snapshot and movie files). . To connect the camera to your computer and save files 1. Turn on the camera and press [MENU]. 2. On the “Set Up” tab, select “USB” and then press [6]. 3. Use [8] and [2] to select “Mass Storage”, and then press [SET]. 4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer.
5. Turn on the camera. 6. Copy images to your computer. Windows Vista 1Select “Open folder to view files”. 2Drag the “DCIM” folder to your Windows desktop to copy it. Windows XP 1Select “Open folder to view files” and then click “OK”. 2Drag the “DCIM” folder to your Windows desktop to copy it. Windows 2000 1Double-click “My Computer”. 2Double-click “Removable Disk”. 3Drag the “DCIM” folder to your Windows desktop to copy it. 7. After you finish copying images, disconnect the camera from the computer.
. To view images you copied to your computer 1. Double-click the copied “DCIM” folder to open it. 2. Double-click the folder that contains the images you want to view. 3. Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 95. • An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation.
Save images to a computer automatically/Manage images Installing Photo Loader with HOT ALBUM on your computer makes it possible to transfer images from the camera to your computer automatically. . To install Photo Loader with HOT ALBUM 1. Start up your computer, and place the bundled CD-ROM into its CDROM drive. Normally, this should cause the menu screen to appear automatically.
Playing Movies Windows Media Player, which is already installed on most computers, can be used for movie playback. To play back a movie, first copy the movie to your computer and then double-click the movie file. . Movie Playback Precautions • Be sure to move the movie data to the hard disk of your computer before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc. • Proper movie playback may not be possible on some computers.
. To upload a movie file to YouTube • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including neighboring copyrights) unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s). • The maximum file size for each upload is 100 MB. 1. Record the movie you want to upload using the “For YouTube” BEST SHOT movie scene.
Transferring Images from Your Computer to Camera Memory If you want to transfer images from your computer to the camera, install Photo Transport on your computer from the CD-ROM that comes with the camera. . To install Photo Transport 1. On the CD-ROM menu screen (page 84), select “Photo Transport”. 2. After reading the information about installation conditions and system requirements for installation in the “Read me” file, install Photo Transport. . To transfer images to the camera 1.
. To transfer computer screen captures to the camera 1. Connect the camera to your computer (page 81). 2. On your computer, click the following: Start * All Programs * Casio * Photo Transport. This starts up Photo Transport. 3. Display the screen whose screen capture you want to transfer. 4. Click the [Capture] button. 5. Draw a boundary around the area you want to capture. Move your mouse pointer to the upper left corner of the area you want to capture and then hold down the mouse button.
Viewing User Documentation (PDF Files) 1. Start up your computer, and place the bundled CD-ROM into its CDROM drive. Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu screen automatically, navigate to the CDROM on your computer and then double-click the “AutoMenu.exe” file. 2. On the menu screen, click the “Language” down arrow button and then select the language you want. 3. Click “Manual” to select it and then click “Digital Camera”.
Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. When you want to do this: Save images to your Macintosh and view them there manually Operating Install this software: System Version Mac OS 9 Mac OS X Mac OS 9 Save images to your Macintosh automatically/ Manage images Mac OS X Play movies See page: Installation not required. Use commercially available software.
4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh. USB port USB cable Large connector • The camera does not draw power over the USB cable. Make sure the camera’s Small connector battery is sufficiently charged before USB/AV port connecting.
. To view copied images 1. Double-click the camera’s drive icon. 2. Double-click the “DCIM” folder to open it. 3. Double-click the folder that contains the images you want to view. 4. Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 95. • An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.
Playing a Movie You can use QuickTime, which comes bundled with your operating system, to play back movies on a Macintosh. To play back a movie, first copy it to your Macintosh and then double-click the movie file. . Movie Playback Precautions Proper movie playback may not be possible on some Macintosh models. If you experience problems, try the following. – Change the movie image quality setting to “Normal” or “LP”. – Upgrade to the latest version of QuickTime.
Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. • For details about how folders are organized in memory, see “Memory Folder Structure” (page 95). Name and Maximum Number Allowed Example Each folder can contain up to 9999 files named CIMG0001 through CIMG9999.
Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF DCF is a standard that makes it possible to view and print images recorded on one manufacturer’s camera on DCF-compliant devices produced by other manufacturers. You can transfer DCF-compliant images recorded with another camera to this camera and view them on this camera’s monitor screen. . Memory Folder Structure 100CASIO * CIMG0001.JPG CIMG0002.AVI CIMG0003.WAV CIMG0004.
. Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen. . Built-in Memory and Memory Card Data Handling Precautions • Whenever copying memory contents to your computer, you should copy the DCIM folder and all of its contents.
Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 47. Turning Control Panel Display On or Off (R Panel) Procedure [MENU] * Set Up Tab * R Panel Use this procedure to turn Control Panel display on or off. Off On Turns off Control Panel display. This setting helps to view more of the image when the 16:9 aspect ratio is selected.
Configuring Camera Sound Settings (Sounds) Procedure [MENU] * Set Up Tab * Sounds Startup Specifies the startup sound Sound 1 - 5: Built-in sounds (1 through 5) Off: Sound off Half Shutter Shutter Operation Operation (=) Specifies the sound volume. This setting is also used as the audio level during video output (page 64). Play (=) Specifies the volume of movie and Audio Snapshot audio output. This volume setting is not used during video output (from the USB/AV port).
Configuring World Time Settings (World Time) Procedure [MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Use [8] and [2] to select “World” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2.
Setting the Camera’s Clock (Adjust) Procedure [MENU] * Set Up Tab * Adjust [8] [2] Change the setting at the cursor location [4] [6] Move the cursor between settings [BS] Toggles between 12-hour and 24-hour format When the date and time settings are what you want, press [SET] to apply them. • You can specify a date from 1980 to 2049. • Be sure to select your Home City (page 99) before setting the time and date.
Specifying the Display Language (Language) Procedure [MENU] * Set Up Tab * Language . Specify the display language you want. 1 Select the tab on the right. 2 Select “Language”. 3 Select the language you want. 1 23 Configuring Sleep State Settings (Sleep) Procedure [MENU] * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time. Press any button to turn the monitor screen back on.
Configuring Auto Power Settings (Auto Power Off) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) • Auto Power Off is disabled under any of the following conditions.
Configuring USB Protocol Settings (USB) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Mass Storage Select this setting when connecting to a computer (pages 81, 90). With this setting, the computer sees the camera as an external storage device.
Formatting Built-in Memory or a Memory Card (Format) Procedure [MENU] * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all contents on the memory card or in built-in memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it. • Formatting built-in memory will delete the following data.
Configuring Monitor Screen Settings You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode. Information display on Information display + Histogram on Information display off Displays information about image settings, etc.
How to Use the Histogram A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. If the histogram appears too lopsided for some reason, you can use EV shift to move it left or right in order to achieve better balance. Optimum exposure can be achieved by EV shifting so the graph is as close to the center as possible.
Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. . Directly Viewing the Sun or Bright Light • Never look at the sun or any other bright light through the cameras viewfinder. Doing so can damage your eyesight. . Flash • Never use the flash unit in areas where flammable or explosive gas may be present.
. Smoke, abnormal odor, overheating, and other abnormalities • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera, taking care to protect yourself against burn injury. 3. Contact your dealer or nearest CASIO authorized service center. .
. Locations To Be Avoided • Never leave the camera in any of the following types of locations. Doing so creates the risk of fire and electric shock. – Areas subject to large amounts of humidity or dust – Food preparation areas or other locations where oil smoke is present – Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed vehicle parked in the sun, or other areas subject to very high temperatures • Never place the camera on an unstable surface, on a high shelf, etc.
• Should you ever notice leakage, strange odor, heat generation, discoloration, deformation, or any other abnormal condition while using, charging, or storing a battery, immediately remove it from the camera or charger unit and keep it away from open flame. • Do not use or leave the battery under direct sunlight, in an automobile parked in the sun, or in any other area subject to high temperatures. Doing so can damage the battery, and cause deterioration of its performance and loss of service life.
. Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
. Caring for your camera • Never touch the lens or flash window with your fingers. Finger smudges, dirt, and other foreign matter on the lens or flash window can interfere with proper operation of the camera. Use a blower or other means to keep the lens and flash window free of dirt and dust, and wipe gently with a soft, dry cloth. • To clean the camera, wipe it with a soft, dry cloth. . Old Rechargeable Battery Handling Precautions • Insulate the positive and negative terminals with tape, etc.
. Other Precautions The camera becomes slightly warm during use. This is normal and does not indicate malfunction. . Copyrights Except for your own personal enjoyment, unauthorized use of use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a network are prohibited. This product contains the software of FotoNation, Inc. FotoNation is a registered trademark of FotoNation, Inc. FaceTracker is a trademarks of FotoNation, Inc. This product’s YouTube upload functionality is included under license from YouTube, LLC. The presence of YouTube upload functionality in this product is not an endorsement or recommendation of the product by YouTube, LLC.
Power Supply Charging If the [CHARGE] lamp does not light red... Charging cannot be performed because ambient temperature or the temperature of the charger is too hot or too cold. Leave the camera in a location whose temperature is within the range where charging can be performed. When the camera returns to a temperature where charging can be performed, the [CHARGE] lamp will light red. If the [CHARGE] lamp flashes red... The battery is faulty or the battery is loaded in the charger incorrectly.
Battery Precautions . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 5°C to 35°C (41°F to 95°F). Outside this temperature range charging can take longer than normal or even fail.
Using a Memory Card See page 14 for information about supported memory cards and how to load a memory card. To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one. • Never remove a card from the camera while the back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card. .
. Memory Card Handling Precautions Certain types of cards can slow down processing speeds. In particular, you may experience problems saving high-quality (HQ) movies. Use of certain types of memory cards increase the time it takes to record movies, which can cause movie frames to be lost. This condition is indicated by » and Y flashing on the monitor screen. Use of a memory card with a maximum transfer speed of at least 10MB per second is recommended. .
Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.
General Guide The numbers in parentheses indicate the pages where each item is explained. .
Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera. .
. Movie Recording Panel : Off 45 1 2 9 8 6 7 1Recording mode (page 40) 2Remaining movie memory capacity (page 40) 3Movie image quality (page 59) 4Focus mode (page 49) 5White balance setting (page 32) 6Exposure compensation (page 34) 7Battery level indicator (page 12) 8Histogram (page 105) 9Movie recording time (page 40) Panel : On 4 1 2 3 9 5 6 8 7 .
. Movie Playback 12 3 4 5 6 7 1File type 2Protect indicator (page 67) 3Folder name/file name (page 94) 4Movie recording time (page 62) 5Movie image quality (page 58) 6Date/time (page 38) 7Battery level indicator (page 12) Reset Initial Default Settings The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 104). Menu items depend on whether the camera is in the REC mode or PLAY mode.
“Quality” Tab Size 8M (3264x2448) T Quality (Snapshots) Normal » Quality (Movies) HQ EV Shift 0.0 White Balance Auto ISO Auto Metering B Multi Color Filter Off Sharpness 0 Saturation 0 Contrast 0 Flash Intensity 0 “Set Up” Tab R Panel Off Sleep 1 min Sounds – Auto Power Off 1 min File No. Continue REC/PLAY Power On World Time Home USB Mass Storage Timestamp Off Video Out NTSC 4:3 Adjust – Format – Date Style – Reset – Language – .
When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on. 1)The battery may not be loaded correctly (page 11). 2)The battery may be dead. Charge the battery (page 10). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-70 rechargeable lithium ion battery. The camera suddenly powers down.
Problem Possible Cause and Recommended Action The flash does not fire. 1)If ? (Flash Off) is selected as the flash mode, change to another mode (page 26). 2)If the battery is dead, charge it (page 10). 3)If a BEST SHOT scene that uses ? (Flash Off) is selected, change to a different flash mode (page 26) or select a different BEST SHOT scene (page 44). Camera powers down during Selftimer countdown. The battery may be dead. Charge the battery (page 10).
Problem Possible Cause and Recommended Action Subjects are too dark when shooting images in a seashore or ski area. Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode setting to < (Flash On) for daylight synchro flash (page 26), or adjust EV shift to the + side (page 34). The image is out of focus during movie recording. 1)Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range.
Problem Possible Cause and Recommended Action Other The wrong date and time are displayed. The date and time setting is off. Set the correct date and time (page 100). The messages on the display are in the wrong language. The wrong display language is selected. Change the display language setting (page 101). Images cannot be transferred over a USB connection. 1)The USB cable may not be connected securely. Check all connections. 2)The wrong USB communication protocol is selected.
Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 104).
RETRY POWER ON The lens came into contact with an obstruction while moving. The camera will turn off automatically when this message appears. Remove the obstruction and turn power back on again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or an authorized CASIO authorized service center. The card is locked. The LOCK switch of the SD or SDHC memory card loaded in the camera is in the locked position. You cannot store images to or delete images from a memory card that is locked.
Number of Snapshots and Movie Recording Time Snapshot Image Size (Pixels) 8M (3264x2448) 3:2 (3264x2176) 16:9 (3264x1840) 6M (2816x2112) 4M (2304x1728) 2M (1600x1200) VGA (640x480) Image Quality Fine Approximate Image File Size 4.48 MB Built-in Memory Snapshot Recording Capacity SD Memory Card (1GB) Snapshot Recording Capacity 3 210 Normal 2.4 MB 7 392 Economy 1.63 MB 10 578 Fine 4.2 MB 4 224 Normal 2.26 MB 7 418 Economy 1.53 MB 11 615 Fine 3.64 MB 4 259 Normal 1.
Movies Approximate Data Rate (Frame Rate) Built-in Memory Movie Recording Capacity SD Memory Card (1GB) Movie Recording Capacity File Size of 1-minute Movie HQ 640x480 10.5 Megabits/second (30 frames/second) 11 seconds 11 minutes 43 seconds 80.0 MB Normal 640x480 6.1 Megabits/second (30 frames/second) 19 seconds 20 minutes 8 seconds 47.2 MB LP 320x240 2.6 Megabits/second (15 frames/second) 46 seconds 46 minutes 53 seconds 20.
Specifications File Format Snapshots: JPEG (Exif Version 2.2); DCF 1.0 standard; DPOF compliant Movies: Motion JPEG AVI, IMA-ADPCM audio (monaural) Audio (Voice Recording): WAV (monaural) Recording Media Built-in Memory (Image Storage Area: 17.
Sensitivity (Standard Output Sensitivity, Recommended Exposure Index) Snapshots: Auto, ISO 64, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600 Movies: Auto Self-timer Approximate Trigger Times: 10 seconds, 2 seconds, Triple Self-timer Flash Modes Auto, Off, On, Red-eye reduction Flash Range (ISO Sensitivity: Auto) Wide Angle: 0.15 m to 3.2 m (0.5' to 10.5') Telephoto: 0.6 m to 1.5 m (2.0' to 4.9') * Range is affected by optical zoom.
Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
. Rechargeable lithium ion battery (NP-70) Rated Voltage 3.7 V Rated Capacitance 1050 mAh Operating Temperature 0 to 40°C (32 to 104°F) Dimensions 31.5 (W) x 44.1 (H) x 7.5 (D) mm (1.24" (W) x 1.74" (H) x 0.30" (D)) Weight Approximately 24.5 g (0.86 oz) . Charger unit (BC-70L) Input Power 100 to 240 V AC, 80 mA, 50/60 Hz Output Power 4.
CASIO COMPUTER CO.,LTD.
