User's Manual

6
E
Mode Switch
Getting to know your cash register
Note:
An error is gen-
erated (E01 dis-
played) whenever
the position of the
Mode Switch is
changed during
registration.
The position of the Mode Switch controls the type of operations you
can perform on the cash register. The PROGRAM key (marked PGM)
can be select any Mode Switch setting, while OPERATOR key (marked
OP) can be used to select OFF, REG or CAL only.
OFF
In this position, the power of the cash register is off.
REG (Register)
This is the position used for registration of normal transactions.
RF (Refund)
This is the position used for registration of refunds.
CAL (Calculator)
This is the position used for calculator mode.
PGM (Programming)
This is the position used to program the cash register to suit the
needs of your store.
X (Read)
This is the position used to produce reports of daily sales totals with-
out clearing the totals.
Z (Reset)
This is the position used to produce reports of daily sales totals. This
setting clears the totals.
OP
PGM
GETTING TO KNOW YOUR CASH REGISTER
Display
Operator display Customer display
!
Department Number Display
Anytime you press a department key to register a unit
price, the corresponding department number appears
here.
@
PLU Number Display
Anytime you perform a PLU registration, the corre-
sponding PLU number appears here.
#
Number of Repeat Display
Anytime you perform "repeat registration" (page 13),
the number of repeats appears here.
Note that only one digit is displayed for the number of
repeats.
!
#
%
@
$
*12345&78
$
Numeric Display
Entered values (unit prices or quantities) and calcu-
lated values (subtotals, totals or change amount due)
are displayed here. The capacity of the display is 8
digits.
This part of the display can be used to show the cur-
rent time or date between registration (page 38).
%
Character Display
In the character programming (P2) mode, it shows
the last entered character.
The total (
T
) or change (
C
) appears when a subtotal,
total, or change is obtained.
In the paper saving mode, it shows
*
.
PGM RF OFF REG CAL X Z
OP key
PGM key
OP key PGM key
REG
OFF
RF
PGM
XCAL
Z
1
2
#
4
12345&78