User's Manual

98
E
In case of power failure
If the power supply to the terminal is cut by a power failure or any other reason, simply wait for power to be
restored. The details of any on-going transaction as well as all sales data in memory are protected by the
memory backup batteries.
• Power failure during a registration
The subtotal for items registered up to the power failure is retained in memory. You will be able to continue with
the registration when power is restored.
• Power failure during printing a read/reset report
• Power failure during printing of a receipt and the journal
Printing on remote printer will resume after power is restored. A line that was being printed when the power
failure occurred is printed in full.
The memory protection battery is constantly charging and discharging as you switch the terminal on and off
during normal operations. This causes the capacity of the battery to decrease after approximately five years of
use.
Important !
•Remember a weak battery has the potential of losing valuable transaction data.
•A label on the back of the terminal shows the normal service period of the battery installed in the
terminal.
•Have the battery replaced by your dealer within the period noted on this label.
Troubleshooting and Options
Options
Remote customer display: QT-6060D
Hand held scanner: HHS-15
Slip printer: SP-1300
Cable: PRT-CB-8C
Power supply: AD31U or AD31E
Remote printer: UP-360, UP-250
Cable: PRT-CB-8A or PRT-CB-8B
Power supply: PS-180 and AC-170 for UP-250
Cash drawer:
MCR: QT-6046MCR
Interlink cable: PRL-CB-2
Consult with your CASIO dealer for details.