User manual

ManualsBrandsCasio ManualsFitness Trackers5560

Table Of Contents

Contents

Basic Operations

Watch Face Items

Navigating Between Modes

Mode Overview

Using the Crown

Hand and Day Indicator Movement

Solar Charging

Using Mobile Link with a Mobile

Phone

Getting Ready

A Install the required app on your phone.

B Configure Bluetooth settings.

C Pair the watch with a phone.

Auto Time Adjustment

Configuring World Time Settings

Viewing Stopwatch Data

Configuring Timer Settings

Setting the Alarm

Adjusting Hand and Day Indicator Alignment

Phone Finder

Configuring Watch Settings

Returning the Watch to Its Factory Default

Settings

Changing the Home City Summer Time Setting

Checking the Watch Charge Level

Connection

Connecting with a Phone

Canceling a Connection with a Phone

Using the Watch in a Medical Facility or

Aircraft

Unpairing

After Purchasing Another Phone

MA1802-EA

Watch Settings

Setting the Time/Date

Configuring Dual Time Settings

Swapping Your Current Location Time and

Dual Time Settings

Stopwatch

Measuring

Measuring a Split Time

Timer

Setting the Time

Using the Timer

Alarm

Configuring Alarm Settings

Turning the Alarm On or Off

Stopping the Alarm

Light

Turning On the Illumination Light

Adjusting Hand and Day Indicator

Alignment

Adjusting Hand and Day Indicator Alignment

Moving to Another Time Zone

Other Information

Summer Time Switching

Supported Phones

Specifications

Mobile Link Precautions

Copyrights and Registered Copyrights

Troubleshooting

Operation Guide 5560

Summary of content (19 pages)

PAGE 2
Operation Guide 5560 Basic Operations This section provides an overview of the watch and its operations. Note ● The illustrations included in this operation guide have been created to facilitate explanation. An illustration may differ somewhat from the item it represents. H [A] / [P] When configuring time settings in your current location (Home City), the second hand indicates whether it is an a.m. time or a p.m. time.
PAGE 3
Operation Guide 5560 ● Stopwatch Mode ● Alarm Mode In this mode, the main hour and minute hands indicate the current time in your current location (Home City), while the other hands show elapsed time as measured by the stopwatch. In this mode, the main hour and minute hands indicate the current time in your current location (Home City), while the dial hour and minute hands show the alarm time setting. ① Using the Crown The watch’s crown is a screw-in (screw lock) type.
PAGE 4
Operation Guide 5560 ● Fast Forward/Fast Reverse After pulling out the crown, rotating it quickly in succession in either direction will cause the hands to move forward or back at high speed. While the hands are moving forward at high speed, quickly rotating the crown in succession again will increase the speed even further. ● Stopping Fast Forward/Fast Reverse Rotate the crown in the direction opposite that of the ongoing operation or press any button.
PAGE 5
Operation Guide 5560 Low Battery Power ● Power Saving The second hand jumps at two-second intervals. Leaving the watch in a dark location for about one hour between the hours of 10 p.m. and 6 a.m. will cause the second hand to stop, and the watch to enter Level 1 power saving. If the watch is left in this condition for six or seven days, all hands will stop at 12 o’clock and the watch will enter Level 2 power saving. 30 Second hand Dead Battery All hands and the day indicator are stopped.
PAGE 6
Operation Guide 5560 Important! ● Note that the watch will not perform auto time adjustment if it enters the Calendar Mode while any one of the conditions below exists. — While a stopwatch elapsed time measurement or timer countdown operation is in progress — Battery power is low. — Watch is in Level 2 power saving. — While it is too far away from its paired phone — While communication is not possible due to radio interference, etc.
PAGE 7
Operation Guide 5560 ● Configuring the Summer Time Setting 1. Y On the Home Screen, tap the “CASIO WATCH+” icon. 2. X Hold down (C) for about two seconds. ● ● The second hand will move to [R]. Keep (C) depressed until the second hand starts moving again and completes one full revolution, stopping again at [R]. The second hand will move from [R] to ● Swapping Your World Time and Home Time 1. Y Tap the “CASIO WATCH+” icon. 2. X Hold down (C) for about two seconds.
PAGE 8
Operation Guide 5560 Configuring Timer Settings 1. Y On the Home Screen, tap the “CASIO WATCH+” icon. 2. X Hold down (C) for about two seconds. ● ● The second hand will move to [R]. Keep (C) depressed until the second hand starts moving again and completes one full revolution, stopping again at [R]. The second hand will move from [R] to e when a connection is established between the watch and phone. Adjusting Hand and Day Indicator Alignment 2. X Hold down (A) for about two seconds.
PAGE 9
Operation Guide 5560 Returning the Watch to Its Factory Default Settings Checking the Watch Charge Level Using CASIO WATCH+ to reset the watch returns to the settings below. Use the procedure below to check the current charge level with CASIO WATCH+. Important! ● ● ● ● Stopwatch elapsed time: 0 hours, 0 minutes, 0 seconds 1. Y On the Home Screen, tap the “CASIO Alarm — Alarm time: 12:00 midnight — Alarm setting: Off ● Mute setting: Off ● Connection time: 3 minutes ● Auto adjust: Off 2.
PAGE 10
Operation Guide 5560 Using the Watch in a Medical Facility or Aircraft Whenever you are in a hospital, on an aircraft, or in any other location where auto signal receive or connection with a phone may cause problems, you can perform the procedure below to disable it. To re-enable auto time adjustment, perform the same operation again. Unpairing After Purchasing Another Phone 1. X If the watch is connected with a phone, press any button to terminate the connection.
PAGE 11
Operation Guide 5560 Watch Settings Configuring Dual Time Settings 4. Press (B) to change the month. Use the procedure below to configure current location time and Dual Time settings manually. 10 Getting ready 9 Enter the Calendar Mode. l Navigating Between Modes 8 11 12 1 2 3 30 Dual Time lets you keep track of the current time in another time zone in addition your current location time. 4 7 6 Month 5 30 Day 5. Rotate the crown to change the day. 30 6. Press (A).
PAGE 12
Operation Guide 5560 Swapping Your Current Location Time and Dual Time Settings You can swap the time in your current location with the Dual Time by holding down (B) for about three seconds. ● Pressing (B) will cause illumination to turn on. Keep the button depressed for three seconds. Before swapping Current location time After swapping Stopwatch The stopwatch can measure elapsed time up to 23 hours, 59 minutes, 59 seconds.
PAGE 13
Operation Guide 5560 Using the Timer Timer The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. ● Configuring Alarm Settings 1. Press (B) to start the countdown. 1. Pull out the crown to the first click. This turns on the alarm. The beeper is muted in the cases described below. — When battery power is low Alarm on 30 Getting ready Enter the Timer Mode.
PAGE 14
Operation Guide 5560 Light The watch has an LED light that you can turn on for reading in the dark. Getting ready Enter the Calendar Mode or Alarm Mode. l Navigating Between Modes Calendar Mode Adjusting Hand and Day Indicator Alignment Strong magnetism or impact can cause the hands and/or the day indicator to go out of alignment. If this happens, adjust hand and day indicator alignment. 7. Rotate the crown to align the small hour and minute hands with 12 o’clock, and the small 24-hour hand with 24. 8.
PAGE 15
Operation Guide 5560 Moving to Another Time Zone Use the procedure below to easily change day and time settings of the watch to a destination location. Other Information This section provides non-operational information you also need to know. Refer to this information as required. Summer Time Switching ● Before Boarding 1. Configure the World Time (Dual Time) to the current time at your destination.
PAGE 16
Operation Guide 5560 Other : Power saving, battery level indicator, LED light (Super Illuminator, afterglow) Power Supply : Solar panel and one rechargeable battery Approximate Battery Life : Approximately 5 months Conditions Auto Time Adjustment: 4 times/day Alarm: Once (10 seconds)/day Illumination: Once (1.
PAGE 17
Operation Guide 5560 I can’t reconnect the watch and phone. Q1 The watch will not re-connect with the phone after they are disconnected. Is CASIO WATCH+ running on your phone? The watch cannot re-connect with the phone unless CASIO WATCH+ is running on the phone. On the phone’s Home Screen, tap the “CASIO WATCH+” icon. Then on the watch, hold down the CONNECT button (C) for about two seconds. Q2 I changed the phone’s Bluetooth from enabled to disabled, and now I can’t connect anymore.
PAGE 18
Operation Guide 5560 Auto Time Adjustment World Time Q1 When does the watch sync its time Q1 The time for a World Time City is not setting with the phone? The watch will connect with the phone and perform auto time adjustment at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete. Q2 Auto time adjustment is performed, but the time setting is not correct.
PAGE 19
Operation Guide 5560 Q6 Hands are stopped and buttons do not work. The watch is in the charge recovery mode. Wait until the recovery process is complete (for about 15 minutes). The watch will recover more quickly if you place it in a brightly lit location. Q7 The indicated current time and date are not correct. Strong magnetism or impact can cause the hands and/or the indicator to go out of alignment. Adjust hand and/or day indicator alignment.