Installation Guide

Website:www.casainc.com

Contact Phone Number:888-257-3857

Service Contact:service@casainc.com

1 Remove the rubber washer,

metal washer and locking nut

from the faucet. Install faucet

through center hole

2.Re-install the rubber washer

followed by the matal washer

and lock-nut.Hand tighten

then tighten further using

a screw driverto tighten

lock-nut screws

4.Turn on faucet for 1-minute

to ßush debris.

SINGLE HOLE BATHROOM FAUCET

3.Attach ßexible hose to

water supply.

PAGE 1
Website:www.casainc.com Contact Phone Number:888-257-3857 Service Contact:service@casainc.com SINGLE HOLE BATHROOM FAUCET 1 . Remove the rubber washer, metal washer and locking nut from the faucet. Install faucet through center hole 3.Attach ßexible hose to water supply. 2.Re-install the rubber washer followed by the matal washer and lock-nut.Hand tighten then tighten further using a screw driverto tighten lock-nut screws 4.Turn on faucet for 1-minute to ßush debris.
PAGE 2
Website:www.casainc.com Contact Phone Number:888-257-3857 Service Contact:service@casainc.com 5.To install the pop-up drain assmbly, remove the bottom drain gasket and drain mounting nut from the pop-up drain body.Plush the bottom drain gasketdown onto the top of the drain mounting nut and twist to attach together. 6.Insert the pop-up drain into the drain hole in the sink. Ensure the top gasket rests securely between the top of the sink and the top of the pop-up drain. 7.