ELİSE
ELISE TABLE 220*90*75 DISASSEMBLED ACCESSORIES AND ASSEMBLY CHART Minifix Shaft 13 pieces Minifix Head 13 pieces Dowel 14 pieces Bingo mini 7 pieces The minifix shaft is pinned to plastic plugs in all trays. The dowel is hammered into the empty holes located near the pinned holes. Bingo minis are pinned to m6 nuts where the products will touch the floor. The cover and the stand are attached to each other with minifix.
ELISE BOOKCASE 201*40*161 DISASSEMBLED ACCESSORIES AND ASSEMBLY CHART Minifix Shaft 42 pieces 3,5*18 Chipboard Screw 74 pieces Minifix Head 42 pieces Kavelye / Dowel 42 pieces Shelf Pim -Crystal28 pieces Grey Square Stand 13 pieces 4*35 Chipboard Screw 14 piece Half Camel Hinge 1 piece Half Camel Brake Hinge 1 piece Butt Hinge 6 pieces Butt Brake Hinge 4 pieces Tuna Handle Handle Screw 160mm 22mm 5 pieces 10 pieces The minifix shaft is pinned to plastic plugs in all trays.
ELISE BOOKCASE 201*40*161 The top tray is placed on the sides and minifixes are tightened with the help of a screw by paying attention to the backboard channel. The assembled cabinets are gathered together, and the rear panel and the cabinets are connected with the minifix. 4*30 screws are used for connecting through inner side of the cabinets. Shelf pins are attached and moving shelves are placed. One piece of brake hinge is used on each door.
ELISE ETEGARE 90*50*75 DISASSEMBLED ACCESSORIES AND ASSEMBLY CHART Minifix Shaft 10 pieces Minifix Head 10 pieces Dowel 16 pieces 3,5*18 Chipboard Screw 16 pieces Bingo Mini 6 pieces Chipboard Tuna Handle Screw 22mm 160mm 4 pieces 2 pieces Super Camel Hinge 2 pieces Super Camel Brake Hinge 2 pieces Shelf Pin -Crystal4 pieces The minifix shaft is pinned to plastic plugs in all trays. The dowel is hammered into the empty holes located near the pinned holes.
ELISE ETAGERE 90*45*75 The crystal shelf pins are placed in the holes drilled into the side trays and attached to the moving shelf pins. One brake hinge and one butt hinge are inserted on the doors and the doors are connected to the side trays by using 3.5*18 screws. The handles are fixed on the doors by using 22mm button-head handle screws. They are brought to the miter by adjusting through the hinge. NOTE: The number of accessories may change when the product dimensions change.
ELISE COFFEE TABLE 70*50*42 DISASSEMBLED ACCESSORIES Minifix Shaft 10 pieces Minifix Head 10 pieces Dowel 10 pieces Bingo Mini 4 pieces The minifix shaft is pinned to plastic plugs in all trays. The dowel is hammered into the empty holes located near the pinned holes. Bingo minis are pinned to m6 nuts where the products will touch the floor.
