Owner's Manual

you wish to hear. It is a good idea to turn down the amplifiers connected to the

OUTPUTS. Bring them up slowly until the desired level of PINK NOISE is reached.

The second entry in the Utility menu allows you to set the desired units of Delay. This

will be shown on the Output screen. Once again pressing ENTER (UTILITY button) to

toggle between Feet or Meters.

The last entry on the Utility menu enters the Serial Control mode. This is used when

connected through the USB cable to a PC running the Carvin XD88 control software.

Once the XD88 is connected to a PC via the USB cable, press ENTER (UTILITY button)

to set the unit in remote control mode. Press the RTA button to exit the Remote control

mode. Now you can control your XD88 from the PC. The maximum cable length for the

USB connection is 16 feet 5 inches or 5 Meters.