Manual

ManualsBrandsCarter-Hoffmann ManualsKitchenDMR Series

DOME AND INDUCTION BASE RACKS

OWNERS / OPERATORS MANUAL

Part Number: 18400-0001 Printed in The United States of America Rev: KBA010614

TABLE OF CONTENTS

UNPACKING, INSPECTION & FREIGHT DAMAGE…………………. 2

DAILY CLEANING…….………………………………………………….. 3

MAINTENANCE…………………………………………………………... 4

WARRANTY……………………………………………………………….. 4

MANUFACTURED BY:

CARTER-HOFFMANN

1551 McCormick Avenue

Mundelein, IL 60060 U.S.A.

Phone: 847-362-5500

Fax: 847-367-8981

Toll Free: 800-323-9793

Email: technicalservice@carter-hoffmann.com

BSR Induction Base

Rack

DMR Dome Rack

Summary of content (4 pages)

PAGE 1
DOME AND INDUCTION BASE RACKS OWNERS / OPERATORS MANUAL MANUFACTURED BY: CARTER-HOFFMANN 1551 McCormick Avenue Mundelein, IL 60060 U.S.A. Phone: 847-362-5500 Fax: 847-367-8981 Toll Free: 800-323-9793 Email: technicalservice@carter-hoffmann.com DMR Dome Rack BSR Induction Base Rack TABLE OF CONTENTS UNPACKING, INSPECTION & FREIGHT DAMAGE…………………. DAILY CLEANING…….………………………………………………….. MAINTENANCE…………………………………………………………... WARRANTY………………………………………………………………..
PAGE 2
UNPACKING AND INSPECTION This appliance should be thoroughly cleaned prior to use. See the CLEANING INSTRUCTIONS in this manual. 1. Remove the cabinet from shipping carton, ensuring that all packing materials and protective plastic has been removed from the unit. 2. Inspect all components for completeness and condition. 3. If any freight damage is present, a freight claim must be filed immediately with the shipping company. 4. Freight damage is not covered under warranty.
PAGE 3
DAILY CLEANING PROCEDURES CAUTION: Beware of sharp edges with sheet metal during cleaning process. CAUTION: Do not use steel wool pads as they will result in rusting from the ferrous metal in the pads. 1. Vinyl trim should be washed with a chlorine-free detergent and water. Rinse thoroughly with clear water and allow to dry. Never use abrasive cleaners, waxes, car polish, or substances containing strong aromatic solvents or alcohol.
PAGE 4
MAINTENANCE CAUTION: Do not move cabinet unless door is securely closed. Serious damage to hinges and door may result if bumped into tables, walls, or other equipment when the doors are open. CASTERS Some may have caster bearings that are equipped with Zerk grease fittings so that they may be easily lubricated with a grease gun. Lubricate bearings at least once every six months. Lubrication will be required more often if cabinet is cleaned with a hot water or steam cleaning system.