User Guide

VFD — Variable Frequency Drive
NOTES:
1. Weights include economizer (STD).
2. Center of gravity.
3. Do not locate adjacent units with flue discharge facing econo-
mizer inlet. Minimum clearances to be:
Adjacent Units: 158-09
Top of Units: No overhang
Condenser Coil: 48-09
Economizer Side: 68-09
Gas Heat Side: 48-09
Filter Access Side: 108-09 (For Removal of Evaporator Coil)
4. For smaller service and operational clearances, contact
Carrier Application Engineering department.
5. Bottom ducts designed to be attached to accessory roof curb.
If unit is mounted on dunnage, it is recommended the ducts be
supported by cross braces as done on accessory roof curb.
6. Dimensions are in inches.
UNIT
SIZE
OPERATING
WEIGHT
A B CORNER WEIGHT (lb)
lb ft-in. ft-in. 1 2 3 4
48EJ,EKD038 4442 7- 8
11
⁄ 16 3-10
7
⁄ 8 1021 894 1180 1347
48EJE038 4602 7-10
1
⁄ 8 3-11
3
⁄ 16 1080 934 1200 1388
48EJ,EKD044 4668 7- 5
5
⁄ 16 3-10
7
⁄ 8 1033 906 1275 1455
48EJE044 4828 7- 6
13
⁄ 16 3-11
3
⁄ 16 1094 945 1293 1496
48EJ,EKD048 4955 7- 3
11
⁄ 16 3-10
1
⁄ 2 1068 953 1384 1550
48EJE048 5115 7- 5
3
⁄ 16 3-10
13
⁄ 16 1129 994 1401 1592
Fig. 4 — Base Unit Dimensions, 48EJ,EK038-048
6