Datasheet

ManualsBrandsCarlo Gavazzi ManualsRelaysSolid State Relay, 50A, 600V, Zero Switching

Specifications are subject to change without notice (28.11.2018) 1

• Zero switching AC Solid State Relay

• Direct copper bonding (DCB) technology

• Operational ratings: Up to 125 AACrms and 600 VACrms

• 2 input ranges: 3-32 VDC* and 20-280 VAC/22-48 VDC

• Built-in varistor on output

• LED indication

• Clip-on IP 20 protection cover

• Self-lifting terminals

• Housing free of moulding mass

• VDE certified for Glow wire test according to EN60335-1

Product De scrip tion

The industrial, 1-phase relay

with antiparallel thyristor out-

put is the most widely used

indus trial SSR due to its

multiple application possibil-

ities. The relay can be used

for resis tive, inductive and

capacitive loads. The zero

switching relay switches ON

when the sinusoidal curve

crosses zero and switches

OFF when the current cross-

es zero. The built-in varistor

secures transient protection.

The LED indicates the status

of the control input. The clip-

on cover secures touch pro-

tection (IP 20). Protected

output terminals can handle

cables up to 16 mm

Solid State Relay

Number of poles

Switching mode

Rated operational voltage

Control voltage

Rated operational current

Glow wire certified (EN60335-1)

Ordering Key

RAM 1 A 60 D 50 G

Solid State Relays

Industrial, 1-Phase ZS w. LED and Built-in Varistor

Types RAM1A..G

Selection Guide

Rated

operational

voltage

Blocking

voltage

Control

voltage

Max. operational Current

(with suitable heatsink)

25 AAC 50 AAC 50 AAC

High I

100 AAC 125 AAC

230 VACrms

650 V

3 - 32 VDC RAM1A23D25G RAM1A23D50G - - -

20-280 VAC/22-48 VDC RAM1A23A25G RAM1A23A50G

- - -

600 VACrms

1200 V

4 - 32 VDC RAM1A60D25G RAM1A60D50G

RAM1A60D51G RAM1A60D100G RAM1A60D125G

20-280 VAC/22-48 VDC RAM1A60A25G RAM1A60A50G

RAM1A60A51G RAM1A60A100G RAM1A60A125G

Type Selection

Switching mode

Rated operational

voltage

Control voltage

Rated operational

current

Options

A: Zero Switching 23: 230 VACrms A: 20-280 VAC/22-48 VDC 25: 25 AACrms

G: certied for glow wire

requirements of EN60335-1

(ZS) 60: 600 VACrms D: 3 - 32 VDC* 50: 50 AACrms

51: 50 AACrms

100: 100 AACrms

125: 125 AACrms

* 4-32 VDC for RAM1A60...

Summary of content (12 pages)

PAGE 1
Solid State Relays Industrial, 1-Phase ZS w. LED and Built-in Varistor Types RAM1A..
PAGE 2
RAM..G General Specifications Operational voltage range Blocking voltage Zero voltage turn-on Operational frequency range Power factor Approvals CE-marking Isolation Input to Output Input and Output to case RAM1A23.. RAM1A60.. 24 to 265 VACrms 650 Vp ≤ 10 V 45 to 65 Hz > 0.5 @ 230 VACrms UR, cUR, CSA, VDE*, CCC, EAC Yes 42 to 660 VACrms 1200 Vp ≤ 10 V 45 to 65 Hz > 0.5 @ 600 VACrms UR, cUR, CSA, VDE*, CCC, EAC Yes** 4000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms * VDE0805, VDE0700 clause 29, 30.2.
PAGE 3
RAM..G Motor Ratings*: HP (UL508) 230 VAC 400 VAC 480 VAC 600 VAC RAM1..25 RAM1..50, 51 RAM1..100 RAM1..125 1.5 HP 3 HP 7.5 HP 10 HP 3 HP 5 HP 15 HP 15 HP 3 HP 7.5 HP 20 HP 25 HP 5 HP 10 HP 25 HP 30 HP * with suitable heatsink Output Power Dissipation 140 RAM..125G 120 RAM..100G Power dissipation in W 100 80 RAM..50G RAM..51G 60 40 RAM..
PAGE 4
RAM..
PAGE 5
X RAM..G Housing Specifications Weight 25 A, 50 A 100 A, 125 A Housing material Baseplate 25 A, 50 A 100 A, 125 A Glow wire Relay Mounting screws Mounting torque Approx. 60 g Approx. 100 g PA66, RAL7035 850°C, 750°C/2s according to EN60335-1 M5 1.5-2.
PAGE 6
RAM..G Functional Diagram +) A1( ~ Dimensions T1 REGULATION * ZC A2(~- ) L1 LED * Varistor across input applies to AC control versions only. APPLY HEATSINK COMPOUND All dimensions in mm. Connection Diagram L1 L2/N * LOAD (~-) * Depends on system requirements 6 (~+) Control Input Specifications are subject to change without notice (28.11.
PAGE 7
RAM..G Heatsink Dimensions (load current versus ambient temperature) RAM..25 RAM..50, 51 Load current [A] Thermal resistance [°C/W] Load current [A] Thermal resistance [°C/W] 25.0 3.23 2.80 2.37 1.94 1.51 1.09 0.66 50.0 1.25 1.07 0.88 0.70 0.52 0.34 0.16 22.5 3.70 3.21 2.73 2.24 1.75 1.26 0.78 45.0 1.46 1.25 1.04 0.84 0.63 0.42 0.21 20.0 4.30 3.74 3.17 2.61 2.05 1.49 0.92 40.0 1.73 1.49 1.25 1.01 0.77 0.52 0.28 17.5 5.07 4.41 3.76 3.10 2.44 1.
PAGE 8
RAM..G Heatsink Selection Ordering Key • • • • RHS.. Heatsinks and fans 5.40oC/W to 0.12oC/W thermal resistance DIN, panel or thru wall mounting Single or multiple SSR mounting Heatsink Range Overview: http://www.productselection.net/PDF/UK/ssr_accessories.pdf Heatsink Selector Tool: http://www.productselection.net/heatsink/heatsinkselector.
PAGE 9
RAM..G Short Circuit Protection Protection Co-ordination, Type 1 vs. Type 2: Type 1 protection implies that after a short circuit, the device under test will no longer be in a functioning state. In type 2 co-ordination the device under test will still be functional after the short circuit. In both cases, however, the short circuit has to be interrupted. The fuse between enclosure and supply shall not open. The door or cover of the enclosure shall not be blown open.
PAGE 10
RAM..G Type 2 Protection with Miniature Circuit Breakers (M.C.B.s) Solid State Relay type ABB Model no. for Z - type M. C. B. (rated current) ABB Model no. for Wire cross B - type M. C. B. sectional area [mm2] (rated current) Minimum length of Cu wire conductor [m]* RAM..25.. 1-pole S201-Z4 (4A) S201-B2 (2A) 1.0 21.0 S201-Z6 UC (6A) S201-B2 (2A) 1.0 21.0 1.5 31.5 RAM..50.. 1-pole RAM..51.. S201-Z10 (10A) S201-B4 (4A) 1.0 7.6 1.5 11.4 2.5 19.
PAGE 11
RAM..G Environmental Information The declaration in this section is prepared in compliance with People’s Republic of China Electronic Industry Standard SJ/ T11364-2014: Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products.
PAGE 12
RAM..G FASTON terminals • Faston tabs • Tab dimensions according to DIN 46342 part 1 • Pure tin-plated brass Faston terminals in packs of 20 RM48 ** F4 * RS, RM Solid State Relay Tab orientation * 0: flach (0º) 4: abgewinkelt (45º) ** 48: 4.8mm faston for input 63: 6.