User manual

8
EN
“UEX-PLUS” +030220621 - rel. 1.1 - 30.05.2008
installeruserservice
secure the appliance to the wall through the hole in the centre on 4.
the rear of the unit. For the weights and dimensions see Figs. 1.a,
1.b, 1.c.
Wall-mounting
Models UE001 to UE130
bracket
X
Fig. 1.e
Spacing of the holes on the wall
Models UE001 to UE018
distance
mm (in)
Models
UE001 to
UE008
UE009 to
UE018
X 270 (10.7) 270 (10.7)
Y 496 (19.5) 591 (23.3)
Z 107 (4.2) 107 (4.2)
Z’ 163 (6.4) 163 (6.4)
Fig. 1.f
Models UE025 to UE065
X
Y
Z
=
==
=
distance
mm (in)
UE025 to
UE045
UE045* to
UE065
X 310 (12.2) 400 (15.7)
Y 655 (25.8) 730 (28.7)
Z 250 (9.8) 315 (12.4)
* 230 Vac models only
Fig. 1.g
Models UE090 to UE0130
XX
Y
XX
X
XX
==
==
Fig. 1.h
distance mm (in) Models UE090 to UE130
X 150 (5.9)
Y 740 (29.1)
Z 850 (33.5)
1.6 Removing the front cover
Models UE001 to UE018
1
2
4
3
5
Fig. 1.i
turn oval-shaped label with the Carel logo, revealing the head of the
1.
earth screw below;
remove the screw using a screwdriver;2.
hold the cover by the sides and lift it around 20 mm (0.79”), releasing 3.
it from the protruding edges of the humidi er;
remove the cover by moving it forwards;4.
remove the protective  lm 5.
Models UE025 to UE130
1
3
2
4
Fig. 1.j
remove the screws from the top of the humidi er using a
1.
screwdriver;
hold the cover/covers from the top and lift it around 20 mm (0.79”);2.
remove the cover/covers by moving it/them forwards;3.
remove the protective  lm (on all the outside surfaces of the 4.
humidi er).
1.7 Fitting the front cover
Models UE001 to UE018
1
3
4
2
Fig. 1.k
turn the red oval-shaped plate with the CAREL logo, revealing the
1.
fastening hole below;
slip the cover onto the frame (keeping it slightly raised and tilted), 2.
until it rests on the rear edges;
tighten the earth screw using a screwdriver;3.
X
Y
Z Z’
==