Product Brochure
- 12 -
• Air Gap/
Air Break
• Flow Control Device
• Flow direction
• Air Intake
• Cleanout
• Flow control orice
Key to hydromechanical function and performance is ow control. If designing for compliance
with PDI-G101 an external ow control(s) SHALL be required as part of the design and
installation. Where acceptable to the Authority Having Jurisdiction, internal means of ow
control can be employed providing that the interceptor is approved to the currently published
version of ASME A112.14.3 –Type C or D. Any method of ow control SHALL be accessible once
in operation for cleaning and maintenance purposes. The Endura® external ow control device
can be recessed into the oor if required. Extension sleeves available. (See Page 5)
Flow Control Location – Indirect Connection:
Some local jurisdictions require warewashing installations to be made on an indirect basis
incorporating an air gap.
An air gap prevents back up of contaminated water into the sinks/appliances in the event of a
system back ow. The ow control device must be incorporated before the indirect connection
to prevent overow occurring during high/maximum waste water discharge. If an air gap is
located within 6” of ow control device*, installation of the air intake tee is optimal. (*Verify
with Authority Having Jurisdiction)
Where required to be installed as an indirect plumbing system, the initial
means of ow control SHALL be installed upstream of the air gap to
prevent overow during xture/appliance discharge.
Dimensions - Flow Control Device Assembly
Flow Control Body Air Intake Tee
Connection
Iron Pipe
Size (Solvent
weld)
2” h x h 3” h x h 4” h x h 3” spg x h 4” spg x h
XL Models
4” h x h
A 3”
(76.2mm)
4.23”
(107.4mm)
6.13”
(155.7mm)
2.67”
(67.8mm)
3.19”
(81mm)
3.19”
(81mm)
B 3.84”
(97.5mm)
5.93”
(151mm)
6.84”
(173.7mm)
4.01”
(101.9mm)
5.04”
(128mm)
5.04”
(128mm)
C - - - 2.27”
(57.7mm)
2.72”
(69.1mm)
2.72”
(69.1mm)
1 Piece Compact Flow Control 2 Piece Flow Controls (3” Version Illustrated)
Flow Control & Air Intake Combined
Connection
Iron Pipe
Size (Solvent
weld)
Compact
2” h x h
A 3.94”
(100mm)
B 3.44”
(87.4mm)
C -
A
B
AIR INTAKE TEE on XL models 4” hxh
Technical Data
Grease Capacity Min - lb (kg): Industry minimum grease capacity based on GPM ow rate. Requires minimum 2 lb of grease capacity for each GPM of ow.
Grease Capacity Actual - lb (kg): Actual capacity at breakdown when tested to ASME A112.14.3 / NSF ES 15741 as indicated.
*
Not evaluated to breakdown capacity (PDI-G101)
Flow Control
CAPACITIES
Endura 7 Endura 10 Endura 15 Endura 20 Endura 25LO Endura 25 Endura 35 Endura 50 Endura XL75 Endura XL100
• Part Number 3907A02 3910A02 3915A02C 3920A02 3925A02LO 3925XTA02 (2”)
3925XTA03 (3”)
3935A03 (3”)
3935A04 (4”)
3950A03 (3”)
3950A04 (4”)
4075A04
4075A04M
40100A04
40100A04M
US Gallons Per Minute - GPM (L/Sec) 7 (0.44) 10 (0.63) 15 (0.94) 20 (1.26) 25 LO (1.6) 25 (1.6) 35 (2.2) 50 (3.2) 75 (4.74) 100 (6.3)
Average Eciency % (ASME
A112.14.3)
95.5% 92.5% 92.0% 95.4% 97.1%
96.7% (2”)
97.3% (3”)
98.6% 93.9% >98% >98%
Operating Temperature Capabilities
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
220˚F
(104˚C)
160˚F
(71˚C)
160˚F
(71˚C)
Cover Load Rating- CSA B481.0
(Proof Load for Approval)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
440 lb
(200 kg)
S 20,000 lb (9072 kg)
M 4000 lb (1814 kg)
S 20,000 lb (9072 kg)
M 4000 lb (1814 kg)
Unit Weight (Empty)
15.8 lb
(7.17 kg)
15.8 lb
(7.17 kg)
15.8 lb
(7.17 kg)
23 lb
(10.4 kg)
23.9 lb
(10.85 kg)
35.61 lb (16.153 kg) (2”)
37.77 lb (17.136 kg) (3”)
45 lb
(20.4 kg)
60 lb
(27.2 kg)
233 lb
(106 kg)
283 lb
(128 kg)
Liquid Capacity
12.96 gal
(49.06 L)
12.96 gal
(49.06 L)
12.96 gal
(49.06 L)
21.6 gal
(81.8 L)
18.9 gal
(71.54 L)
30.6 gal (115.83 L) (2”)
29.5 gal (111.67 L) (3”)
39.4 gal
(149.1 L)
52.0 gal
(197 L)
158 gal
(598 L)
257 gal
(973 L)
Connection size
(mechanical joint only)
2” 2” 2” 2” 2” 2” (3925XTA02)
3” (3925XTA03)
3” (3935A03)
4” (3935A04)
3” (3950A03)
4” (3950A04)
4” 4”
Min. Grease Capacity - lb (kg) 14 (6.35) 20 (9.07) 30 (13.6) 40 (18.1) 50 (22.68) 50 (22.68) 70 (31.8) 100 (45.4) 150 (68.2) 200 (90.8)
Grease Capacity Actual
(ASME A112.14.3) - lb (kg)
†
NSF ES 15741
31.95 (14.49) 38.07 (17.28) 40.97 (18.58) 76.4 (34.65) 53.4 (24.22)
72.55 (32.90) (2”)
73.01 (33.11) (3”)
138.5 (62.8)
122.07 (55.3)*
559 (253)
†
1058 (480)
†
NOTE: Endura® XL models are supplied as standard with an internal
ow control. External ow controls are available separately.
L L L L L L L L