Manual

Recording Still Images on a Memory Card
You can record still images with the camcorder, from a tape in the camcorder or from
devices connected via the DV terminal or AV terminal. You can also record a still
image on the memory card while you record a movie on the tape.
PHOTO button
Card access k _\ _'_'/_
indicator _
ii! !!i
1. Set the camcorder to CARD CAMERA mode.
A white focusing frame appears in the center of the screen. The camcorder will focus on
the subject in the center of the screen. Tochange the focusing point, see Selecting the
Focusing Point (C_3 103).
2. Press the PHOTO button halfway. [ ....._.._>_ /
/
• O and focusing frame turn green when focus is adjusted. The
beep sounds twice. The picture may appear out of focus for a
moment while the camcorder is focusing.
• Exposure is locked.
• When you pressthe PHOTObutton on the wirelesscontroller, recording starts
immediately.
3. Press the PHOTO button fully.
• 0 and focusing frame disappear and you hear a shutter sound.
• The card accessindicator flashes and the card access display
appears.
• The still image shown on the screen will be recorded on the
memory card.
O Do not turn off the camcorder, change the position of the TAPE/CARDswitch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.
:b When you are using a SDMemory Card, make sure that the protect switch is
set to allow recording.
96