Instruction Manual Digital Video Camcorder ZR20

Mastering

the Basics

When connecting for playback on a TV screen, make sure the AV/headphone

terminal is switched to AV. If PHONES appears in the display, switch the terminal.

• Use the S-150 S-video Cable to connect the S-video terminals. Use the

STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect the

white plug to the white AUDIO terminal L (left). Connect the red plug to the red

AUDIO terminal R (right). Do not connect the yellow plug.

• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on the

television to VIDEO.

• If you are connecting the camcorder to a VCR, set the input selector on the

VCR to LINE.

VIDEO

S(S1)-VIDEO

INPUT

AUDIO

IN/OUT

MIC

If your TV (or VCR) has an S (S1) -video input terminal

For higher picture quality, we recommend playing back recordings on a TV with

an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal,

recordings made in the 16:9 mode for wide screen TVs will automatically play

back in wide screen mode on the TV screen.

S-150 S-video Cable

STV-250N Stereo Video Cable

2_ZR20_E(08-34) 3/12/01 13:49 Page 31