XH G1S / XH A1S Brochure

Connection to a Standard Definition TV or Monitor

Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal

• Refer to the connection diagram in the previous section ( 80).

• Select the appropriate component video signal depending on the TV or monitor you connect.

Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting

option and close the menu.

Using the A/V1 or VIDEO 2 Terminal

• Refer to the connection diagram in the previous section ( 81).

• If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately.

Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and

close the menu.

 We recommend powering the camcorder from a household power outlet.

 TV sets equipped with the Video ID-1 System: Recordings made with a 16:9 aspect ratio ( 34)

will be played automatically in widescreen mode whether you connect the camcorder to the TV

using the A/V1 terminal or VIDEO 2 terminal.

 During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV

standard, the picture may be distorted.