User Guide

Camera and Picture Control
Various Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows
4-24
Overlaying Marker
You can display the overlaying marker in the preview. The safety zone (90% and 80% of the preview
image size), a center, a level and 8 types of aspect markers are predefined as the default markers.
When splitting the preview image ( 4-27), the markers are not displayed.
 Displaying Overlaying Markers and Settings
1
Right click on the preview and
select [Marker Settings] from the
menu.
Select a marker and click [OK] to display the
marker.
1
2
4
6
3
11
10
5
78
9
1 Marker List • Placing a check mark displays the marker on the preview.
• or that appears next to a marker name indicates that the marker is a
group marker which contains several markers in it. Select one of the
markers in the group. Clicking opens the group marker set and clicking
closes the displayed marker set, displaying only the group name.
• You can change the name and group that the marker belongs.
2 [Aspect ratio] Selects the aspect ratio of the marker preview.
3 [Marker preview] Displays the marker and allows you to edit it.
4 [Coordinates of
selected marker]
Taking the upper left corner as a base point, the coordinate of the marker is
displayed as a percentage. You can directly enter the coordinates.
5 [OK] Quits the marker setting, and displays the selected marker in the marker
preview.
6 [Up]/[Down] Moves the marker name in the marker list.
7 [Export] Saves the marker.
8 [Import] Adds a new marker in the marker list.
9 [Add] Creates a new marker.
10 [Delete] Deletes a marker.
11 [Property] The property of the selected marker is displayed. You can change the group
name and the marker name.