Operation Manual

119

Projecting Data on USB Flash Memory (SX80 II)

Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II)

3 Connect a USB flash memory.

Connect a USB flash memory to the USB terminal.

Use a USB cable to connect a digital camera or USB memory card reader.

Be sure to use the USB cable supplied with the equipment connected to the projec-

tor.

If the projector recognizes a USB flash memory, The "USB file browser" appears.

• Only the drive which has been set in advance is displayed.

• If multiple memory devices are attached to a multiple-card reader, the folder up

one level in the hierarchy is displayed.

If connection to the USB flash memory fails, the screen as

shown in the right appears.

Disconnect the USB flash memory, and connect it again.

If the projector does not recognize the device, the screen as

shown in the right appears.

• If a USB hub is connected, the screen as shown in the right

appears.

• You cannot connect a USB hub to this projector.

• When connecting a device which consumes large amount

of power such as USB hard disk, use a commercial power

supply.

• If the power supplied from the USB terminal is insufficient, malfunction of the USB

flash memory may result or the projector unable to recognize the device.

USB flash memory

USB cable

Hard disk

USB memory

card reader