Operation Manual

Projecting an Image from a Digital Camera (SX80 II)
116
Operating the Projected Image
When images are projected, you can perform the following operations.
■ Switching to the Next Image
If you have specified multiple images for printing with the digital camera, you can switch
to the next image by pressing the OK button.
• You cannot switch to the previous image with the projector operation. To switch to the
previous image, you must retry the print command with the digital camera.
• Even if a slideshow is running, you can switch to the next image by pressing the OK
button.
■ Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [<] / [>].
• Even if a slideshow is running, you can rotate the image by pressing [<] / [>].
• If the image contains rotational information, the image is rotated to an appropriate
direction automatically.
Remote control Top control
[<] [>]
Rotate by 90° to
the left
Rotate by 90° to
the right
Remote control
Top control