Operation Manual

111
Setting Various Function
Setting Up Functions from Menus
Initializing network settings (SX80 II)
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• Initialized are “IP address” and other
items set in "Connecting the Projector to
Network (SX80 II)" (P125).
• You can do this initialization also from a
Web browser. (P134)
Resetting to the Default Setting
[Other settings] - [Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for
confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• This function cannot reset the value of
[Lamp counter], [Language], [Remote
control], [Input signal] and [Network set-
ting] to default.
• For factory defaults settings, refer to the
page 164 - 166.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Ye s The network settings is initialized.
No Initialization is aborted.
Other settings
System settings
Network setting initialization
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
OK Settings are reset to default.
Cancel Settings are not reset to default.
Other settings
System settings
Factory defaults