Owner manual

Safety Instructions
20
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not move the projector until you have switched off the power, removed the power
plug from the power outlet and unplugged any other cables.
• Before installing or replacing a lens unit, make sure to remove the power plug from
the outlet. Failure to do so could result in an electric shock or injury.
• Do not remove the cabinet from the projector or disassemble it. The interior of the
projector contains high-voltage components as well as parts that are hot. These
could cause an electric shock or burn. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
• Do not disassemble or modify the projector (including consumable parts) or the
remote control.
• Do not insert any object into vents in the projector, such as the air intake vent or
exhaust vents.
• Do not place a pressurized can in front of the exhaust vents. The pressure of the
contents of the can may increase due to heat from the exhaust vents and this could
result in an explosion.
• As strong light beams are emitted while the projector is in use, do not look directly
into the projector lens. Doing so could cause an eye injury. Pay particular attention in
preventing young children to do so.
• When giving a presentation in front of the projector while it is projecting an image,
conduct your presentation from a position where your shadow will not be cast on the
screen and where you do not feel blinded by light from the projector.
Pay attention to the following points regarding installation and handling of the projec-
tor.
• If the projector will not be used for a long period of time, be sure to remove the
power plug from the power outlet to ensure safety. Failure to do so could cause a
fire.
•
The temperature of the cabinet around and above the exhaust vents can become hot
during projector operation.
Touching these areas during operation could cause
burns to the hands.
Do not touch these areas. Doing so may cause burns. Pay particular attention in pre-
venting young children from touching these parts. Additionally, do not place any
metal objects on these areas. Due to the heat from the projector, doing so could
cause an accident or personal injury.
Warning
Caution