Instruction Manual

Automatic Exposure Recording Programs

NOTES

•[‚ Shutter-Pri. AE]:

- On screen only the denominator is displayed – [‚ 250] indicates a shutter speed of 1/250 second,

etc.

- When recording in dark surroundings, you can obtain a brighter picture by using slow shutter

speeds; however, image quality may not be as good and autofocus may not work well.

- The image may flicker when recording with fast shutter speeds.

- Recording movies under fluorescent lights: If the screen starts to flicker, select [‚ Shutter-Pri.

AE] and set the shutter speed to 1/100.

•[“ Aperture-Pri. AE]: The actual range of values available for selection will vary depending on the

initial zoom position.

• When setting a numeric value (aperture or shutter speed), the number displayed will flash if the

aperture value or shutter speed is not appropriate for the recording conditions. In such case, select

a different value.

• During exposure lock, the aperture value/shutter speed cannot be changed. Set the aperture value

or shutter speed before manually adjusting the exposure.

•If you set q > [CUSTOM Dial & Button] to [” Tv / Av] (A 96), you can adjust the shutter

speed or aperture value with the CUSTOM dial and button.

COPY