WFT-E7(ver.2) for EOS R INSTRUCTION MANUAL

If transmitter errors are displayed on the camera’s monitor, refer to the

examples of corrective actions in this section to eliminate the cause of

the error. When an error has occurred, the <

LAN

> lamp on the

transmitter blinks and the error code number is shown on the LCD

panel. The error details can also be checked in the menu, [WFT

settings] 9 [Error description].

Click the error code number in the following table to jump to the

corresponding page.

When the error below is displayed

When “ERROR 01” is displayed on the

transmitter LCD panel, firmly reconnect

the transmitter and the camera with the

interface cable.

* This error is not displayed on the camera’s monitor.

* This error is also displayed when the transmitter is connected to a camera not

compatible with the transmitter.

Responding to Error Messages

11 (p.71) 12 (p.71)

21 (p.72) 22 (p.73) 23 (p.74) 24 (p.74)

41 (p.76) 42 (p.78) 43 (p.78) 44 (p.78) 45 (p.79)

46 (p.80) 47 (p.80)

61 (p.81) 62 (p.81) 63 (p.82) 64 (p.82) 65 (p.83)

66 (p.83) 67 (p.84) 68 (p.84) 69 (p.84)

81 (p.85) 82 (p.85)

91 (p.85)