WFT-E7(ver.2) for EOS R INSTRUCTION MANUAL
32
These instructions are continued from Chapter 1.
1
Select an FTP mode.
To establish security for FTP transfer
using a root certificate, select [FTPS].
For root certificate settings, see page
35.
Select [OK] and press <0> to go
to the next screen.
2
Select [Address setting].
The virtual keyboard is displayed.
3
Enter the FTP server’s server
name or IP address.
If you have set the IP address setting
to [Auto setting] or the DNS address
setting to [Manual setting], the
screen on the left is displayed.
For instructions on screen operations,
see “Virtual Keyboard Operation”
(p.28).
If you have set the DNS address
setting to [Disable], the screen on the
left is displayed.
Turn the <6> dial to move the input
position in the upper area and select
a number with the <Y> <Z> keys.
Press <0> to enter the selected
number.
Configuring FTP Server Connection Settings