WFT-E4 II Instruction Manual

Load a charged battery into the camera. Before attaching the transmitter to the camera, set the

camera’s power switch to <

OFF

>. The transmitter does not have a power switch. It is turned on

and off in conjunction with the camera’s power switch.

Before removing the transmitter, set the camera’s power switch to <

OFF

Remove the terminal cap from the

camera.

Peel off the terminal cap on the camera bottom to

remove.

Attach the removed terminal cap to the

transmitter’s terminal cap holder.

Attach the transmitter.

As shown in the figure, align the transmitter and

the camera, and turn the attachment knob to

attach to the camera.

Attaching to the Camera

COPY