Instruction manual

44
[Server name]
[Image transfer (LAN) settings] / [LAN setting] / [Set up] / [FTP server] / [Target
server] / [Server name]: Enter server name or address.
[Port No.]
[Image transfer (LAN) settings] / [LAN setting] / [Set up] / [FTP server] / [Target
server] / [Port No.]: Enter a number less than 65535.
You can enter the server name using the following
method.
Moving the cursor:
Hold down the <k> button and turn the <c> dial.
Deleting a character in the entry field:
Press the <d> button and the cursor will delete the character on its left.
Selecting a keyboard character and entering it:
Hold down the <b> button and turn the <c> dial to select a character. When you
let go of the button, the character will be entered at the cursor’s position.
Exiting the entry screen:
Press the <e> button. The entries will be registered and the previous screen will
reappear.
Canceling the entry:
Press the <f> button and no changes will be made to the entry. The previous screen
will reappear.
Setting the FTP Server
Target Server
Virtual Keyboard Operation
With EOS-1D-Series Cameras