Owner's Manual

4-43

Change Camera Server Settings

Preset

• Presets should be set on the Camera Server in advance. You cannot set them with VK-64/VK-16.

• If the recording settings using a preset are used on the Camera Server, the preset position will

override camera positions set by VK-64/VK-16, including those in recording schedules and Camera

Server position. The camera control will be lost when starting to control the camera at the Camera

Server.

• If predefined presets are not shown in the [Preset] drop-down menu even though they have been

defined on the Camera Server, click [Get Camera Control] to display the [Camera Control] Panel,

obtain camera control, then configure the settings again.

Restrict Service Time

• If a Camera Server has been configured with [Restrict Service Time] enabled, VK-64/VK-16 will be

able to record from the Camera Server during restricted times.

External Device

• Specify the name of the external device, such as sensor name. You cannot configure it with VK-64/

VK-16.

• If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it.

Sensor Input, Recording to Camera Memory

• Camera Servers have certain features to capture image into its memory based on sensor input or

schedule. If settings are enabled on the Camera Server, those settings take precedence.

VK-64_SysManual_Ev21.book 43 ページ２００９年３月２日　月曜日　午後１時３分

COPY