Network Video Recorder VK-64/VK-16 Ver.2.2 Administrator's Manual

3-11
Set the [Settings] Tab
Storage Server Configuration Reference
Select [Disk Drive Settings]
1. [Drive] - Select the disk drive to configure, from the drop-down menu.
2. [Maximum disk space used] - Check the box and enter a value in Megabytes (MB) or Gigabytes (GB), for
example, "50".
This establishes the maximum disk space used for all video files on the specified drive.
3. [Add Network Drive] - Add a disk drive on the network used as the network drive.
The added network drive is shown on the [Drive] drop-down menu.
4. [Delete Network Drive] - Delete an added network drive.
Adding/Removing a Network Drive
By adding a network drive, you can save recorded video data on a network drive such as NAS (Network
Attached Storage) in addition to the internal HDD.
If you add a network drive in the [Storage Server Configuration] window, the drive will be added to the list of the
pull-down menu of the [Add Camera Server] and [Edit Camera Server] dialog ( P. 4-18, P. 4-24).
Note
Use recommended NAS servers with Windows Storage Server 2003 or Windows Storage Server 2003 R2.
Tip
When using the Storage Server with the local system account, the [Add Network Drive] and [Delete Network
Drive] buttons are disabled.