VK-16/64 v2.1 Administrator's Manual

3-10
Set the [Settings] Tab
Enter [Recorded Video Settings]
1. [Maximum retained history] - Check the [Maximum retained history] option and enter a value from 1 to 999
and then select [Days] or [Weeks] from the pull-down menu.
2.
[Maximum file size/duration] - Check the [Maximum file size/duration] option, enter a value, and select [MB]
or [Hours]. You can enter 32 - 1024 for [MB] and 1 - 24 for [Hours]. If you do not enter a value, 1024 MB or
24 hours is used for the Maximum file size/duration value.
3. [Low disk space warning level] - Enter a percent value.
When the remaining space falls below the specified value, the event will be displayed and a notification will
be e-mailed ( P. 3-5, P. 3-23).
4.
[Reduce recording frame rate when disk is under high load] - When disk is highly loaded, recording frame
rate is temporarily reduced to prevent the recording from stopped. See Chapter 6 for details. This function is
available for JPEG video recording. It cannot be used for MPEG-4 video recording (VB-C500D, VB-C60).
Tip
If [Reduce recording frame rate when disk is under high load] is selected, you will receive an event
notification such as "Effective Recording rate (<recording rate before change> <recording rate after
change> %)" when the recording frame rate drops.
Ex. Effective Recording rate (100.0 90.0 %)
Note
When the free disk space has fallen below the value specified in the [Low Disk Space Warning Level] field,
an event occurs and an event notification mail is sent. Also, if the used disk space exceeds the value spec-
ified in the [Maximum disk space used] field, recorded video will not be saved until the required free disk
space is secured. See P. 3-17 for the disk space management.
VK-64_SysManual_Ev21.book 10 ページ 2009年3月2日 月曜日 午後1時3分
COPY