Corel Application Disc Ver.2 Instruction Manual

9
4 Read the message and click [Yes]
to continue.
Click [No] to cancel and return to the
GuideMenu screen.
5 Click [OK].
When transferring movies back to the
camcorder, the computer requires
available hard disk space the same
size as the file sizes of the movies to be
transferred. You can change the
temporary folder used for this task by
performing the following steps.
1 Click in the main menu.
2 Click in the folder
configuration screen.
The folder selection screen appears.
3 Select a folder on a hard disk that
has sufficient available hard disk
space and click [OK].
4 Click [OK] in the folder
configuration screen.
IMPORTANT
• Movies originally recorded with this
camcorder can be transferred from the
computer. They can be transferred even
if they were edited with DVD
MovieFactory SE. If other types of
movies are transferred back, correct
playback cannot be guaranteed.
• Make sure to back up all data in the
camcorder before transferring movies.
• Do not disconnect the camcorder’s
power source or USB cable while
transferring movies back. Doing so may
result in damage to the camcorder’s
hard disk. Insert a fully charged battery
pack into the camcorder in advance
and use the compact power adapter.
Do not allow the USB cable to be
inadvertently disconnected.
• Movies transferred to this camcorder
will not play back properly if they
contain scenes that were recorded with
another camcorder or recorded in
another video specification/television
system.
• When transferring movies back to the
camcorder, the computer requires
available hard disk space the same size
as the file sizes of the movies to be
transferred.
• If the sum of the number of scenes in
the camcorder and the number of
scenes to be transferred is about 1,000
scenes, scenes may not be transferred
back.
• We recommend transferring back fewer
than 100 scenes at a time.
WHEN TRANSFERRING MOVIES WITH LARGE
FILE SIZES