User Manual

Wi-Fi Connection and Settings

Wi-Fi Connection Using an Access Point

The camcorder can connect to a Wi-Fi network using an access point

(wireless router). You can save settings for up to 4 different access

points.

General requirements

• Correctly configured router that complies with the

802.11b/g/n protocol and is Wi-Fi certified (bears the

logo shown to the right) and a home network.

1 Open the [— Network Setup] screen.

2 Touch the desired setup method.

• Depending on the setup method chosen, the procedure will be

different. Read the descriptions below and continue with the pro-

cedure described in the relevant page.

†

ƒ ’

y }

PlaybackShooting mode

0 > [ Remote Control+Streaming] (from record standby

mode) or [— Wi-Fi] (from any movie index screen in playback

mode) > [w Check/Edit Settings] > [OK] > [Access Point

Connection Settings] > [Not configured]