User Manual

130  Video
Dividing Scenes
You can divide scenes in order to leave out the best parts and later cut
out the rest.
Operating modes:
1 Play back the scene you want to divide.
2 Pause the playback at the point where you want to divide the
scene.
3 Open the scene division screen.
4 Bring the scene to a precise point, if necessary.
Playback controls will appear on the screen (A 56). Use any special
playback modes (fast playback, frame reverse/advance) as necessary
to locate the desired point.
5 Divide the scene.
• The video from the division point to the end of the scene will appear
as a new scene in the index screen.
NOTES
• When advancing/reversing frames while dividing the scenes, the interval
between frames is about 0.5 seconds.
• If the scene cannot be divided at the point where you paused the play-
back, advance/reverse a frame and then divide the scene.
• During the playback of a scene that was divided, you may notice some
anomalies in the picture/sound at the point where the scene was cut.
[Edit] > [Divide]
[µ Divide] > [Yes]