Instruction manual

31
Cannot adjust the camera head angle properly.
Check: Will the camera head move to the limit of its operating range?
P.18
Response: Something has directly moved the camera head.Press the button on
the wireless controller. P.18
The camera head will not move to a preset position.
Check: Will the camera head move to the limit of its operating range?
P.18
Response: Something has directly moved the camera head.Press the button on
the wireless controller. P.18
The VC-C3 will not focus.
Check 1: Is the focus mode set to manual?
Response: Press the button for auto-focus mode. P.19
Check 2: Is the lens dirty?
Response: Clean the lens. P.32
Check 3: Did you restore a preset position?
Response: If a preset position is restored when the VC-C3 is in manual focus
mode, the VC-C3 may be out of focus once the VC-C3 is in the preset
position. Adjust the focus manually or press the button on the wireless
controller to switch the VC-C3 to auto-focus mode. P.20
Check 4: Is the distance between the VC-C3 and the subject outside the VC-
C3’s focusing range?
Response: Depending on the zoom position, the VC-C3 may not be able to focus,
regardless of whether auto-focus or manual focus is used. Adjust the
distance between the VC-C3 and the subject. P.19
Check 5: Is the sublect suitable for auto-focus?
Response: Change the camera head direction to a suitable subject matter. P.19
*VC-C3/E/US/QX3.32 5/29/01 3:26 PM Page 31