Operation Manual

124

[Always]

Preset tour is always performed.

Note

When [Disable] is selected, the following preset tour route settings cannot be configured.

[Route Name]

Enter the tour route name.

[Specify Active Time]

Select [Specified] to configure a preset tour at a predetermined time, and enter the start time and end time for the

preset tour.

If [Viewers Connected] is set for [Conditions to Enable Settings], the preset tour operates when the Viewer is

connected to the camera at the tour start time. If [Always] is set for [Conditions to Enable Settings], the preset tour

always operates.

[Reverse Route]

If you select [Enable], the preset tour order in [Edit Tour Route] will be reversed.

You can select multiple presets.

Note

If the preset position is outside the restrict view area, (a warning icon) is displayed on the left.

The preset is added to the [Edit Tour Route].

Select a preset in [Edit Tour Route] and click the [ ] or [ ] to change its position in the list.

If you select a preset in [Edit Tour Route] and then click [Delete], the preset will be deleted.

Select a preset name in the [Preset List] or [Edit Tour Route] list, and click [Preview]. The preset settings can be

checked in the video display area.

Click [Add] in [Edit Tour Route].

Select a preset to tour from the [Preset List].

HM4x

Click [Add].

HM4x