Network Video Recording Software RM Series Administrator’s Manual

Setting a Recording Schedule
5
85
(1) [Do not record]
Do not record even when a scream is detected.
(2) [Start Recording]
Start recording when a scream is detected. After selecting the item, configure the recording settings below the
item.
(3) [Priority]
Select the event priority. For details, please refer to “Check Events” (P. 117).
The other settings are the same as those for continuous recording (P. 78).
Scream detection recording is not available.
 Linked Event Recording Settings
Tabs named [Rule 1] through [Rule 4] are displayed as shown. Each tab can be configured individually.
(1) [Do not record]
Do not record even when linked events occur.
(2) [Start Recording]
Start recording when linked events occur. After selecting the item, configure the recording settings below the
item.
(3) [Priority]
Select the event priority. For details, please refer to “Check Events” (P. 117).
The other settings are the same as those for continuous recording (P. 78).
Important
• If the recording period for a schedule ends while scream detection recording is in progress, recording will stop.
• To use scream detection recording, you must first configure the scream detection recording settings on the camera. For details,
please refer to the camera manual.
H45 M44
H730MkII
S30MkII
S31MkII
S80xMkII
S90xMkII
RM
-
64/25/9
(3)
(2)
(1)