Network Video Recording Software RM Series Administrator’s Manual

50
(1) [Host Name]
Enter the host name or IP address of the camera.
(2) [Port]
Enter the port number for the camera. Typically, leave [80] unchanged.
(3) [User Name]
Enter the user name for the camera.
(4) [Password]
Enter the password for the user specified in (3).
(5) [Storage Server Group]
Display the appropriate Storage Server Group name.
(6) [Tags]
Add camera tags. Click the [Edit] button to open the [Edit Tags] dialog box, and select tags from [Tags].
Adding camera tags ahead of time lets you search for and specify cameras by their tags.
Click the [Edit] button to create new camera tags. Created tags can also be used for other cameras
connected to the same Storage Server.
Close the [Add Camera] dialog and the cameras are added to the camera list in the [Cameras] tab.
Video from a camera connected to a multi-terminal VB-EX50 cannot be displayed live or recorded by this software.
2
Enter the information required to add the camera.
3
Click [OK].
Important
• Enter the camera’s user name and password in [User Name] and [Password].
• If the host name or IP address of the camera is changed after registration, you must also change the Storage Server setting. For
details, please refer to “Change Camera Information” (P. 51).
(2)
(1)
(3)
(4)
(5)
(6)
C50F
C50i