Network Video Recording Software RM Series Administrator’s Manual

Viewer Settings
7
123
You can also specify 0 minutes. However, two-way audio communication will not stop automatically in such
cases, so you must stop it manually. We recommend setting an arbitrary timeout duration to avoid
unintentional continuation of audio communication.
(8) [Send notification when time is out-of-sync with the storage server group]
Display a message if there is a time difference of five seconds or longer between the Storage Server and the
Viewer computer when connected to a Storage Server Group.
Configure Event Notification and Priorities
(1) [Show Events in Live Events Log]
Display an event in the [Live Events Log] dialog box.
[Equal to or higher than]
Specify the priority of events to be displayed.
Event priorities are configured in RM Manager (P. 64).
(2) [Show Events in Timeline]
Display an event on the timeline.
[Equal to or higher than]
Specify the priority of events to be displayed.
(3) [Show Video Window on Event]
Automatically display the camera’s video window when an event occurs.
[Equal to or higher than]
Specify the priority of events for which a video window is displayed.
(4) [Operator Notification]
Notify the Operator (guest user) that an event occurred.
[Equal to or higher than]
Specify the priority of events to be notified.
[Flash event indicator for]
Specify the time the event indicator flashes right after the event occurs, from 1 to 99 seconds.
[Play audio alert]
Beep when an event occurs.
1
Click the [Event Notification] tab.
2
Configure each item.
(1)
(2)
(3)
(5)
(4)