Camera Management Tool User Manual

Detecting/Setting Cameras
2
37
Note
The settings configured on the Settings Page are saved to only the camera and are not reflected in this tool. After configuring the
settings, select the camera in the camera list of this tool and then click (Update Camera Information) on the toolbar to update
the settings in this tool.
Launching Viewer
You can launch Viewer to check the video of a camera for which the basic settings and the settings of [Settings Page] are
finished.
Perform this operation by selecting and setting one camera at a time.
Viewer appears.
For details on how to operate the Viewer, please refer to the camera’s “Operation Guide”.
Note
It may be necessary to enter the authentication information (user name and password), depending on the camera model and
settings.
1
In the camera list, select the camera for opening Viewer.
2
Click [Viewer].
Alternatively, you can select [Tools] > [Viewer].