User Manual

Step Action Illustration
4 Hold the staple case by its left-hand and
right-hand sides, and lower the bracket on
the staple case.
5 Remove the jammed staples from the sta-
ple cartridge.
6 Return the bracket on the staple case to
its original position.
7 Return the staple case to its original posi-
tion in the saddle stitch unit. Make sure to
align the arrow on the staple case with
the arrow on the saddle stitch unit, as
shown below.
NOTE
When you return the staple
case, always make sure to insert
the staple case until the arrows
are aligned as shown in the il-
lustration.
4
Clear a staple jam in the saddle stitch unit
46
Chapter 4 - Troubleshooting
Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1