User Manual

Clear a paper jam inside the stacker/stapler

Introduction

If a paper jam occurs inside the stacker/stapler, the control panel will display the location of the

paper jam and a procedure to clear the paper jam. Follow the procedure on the control panel to

clear the paper jam. The procedure below describes how to clear a paper jam inside the stacker/

stapler.

CAUTION

• When you remove jammed originals or paper, take care not to cut your hands on the edges

of the originals or paper.

• When you remove jammed originals or paper, take care not to cut your hands on the inside

of the machine. If you cannot remove the paper, contact your local authorised dealer.

• Be careful when you handle optional units that are attached to the machine. When you open

the door or cover of an optional unit to replace a staple cartridge, discard the punch waste, or

clear paper jams or staple jams, prints may still be output if other optional units are

operating normally, and are not involved in the paper or staple jam removal procedure.

Step Action Illustration

1 Open the front door of the stacker/stapler.

2 Open the guide (F-B1).

3 Turn the dial (F-B2) in the direction of the

arrow (clockwise).

Clear a paper jam inside the stacker/stapler

Chapter 4 - Troubleshooting

Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1