Digital Camera User Manual

145
 Contents 
Chapter Contents
Choosing Images Individually
1 Choose[Select].
 Following step 2 in “Using
the Menu” (=
144), choose
[Select] and press the <m>
button.
2 Chooseanimage.
 Press the <q><r> buttons or
turn the <5> dial to choose
an image, and then press the
<m> button. [
] is displayed.
 To cancel selection, press the
<m> button again. [
] is no
longer displayed.
 Repeat this process to specify
other images.
3 Protecttheimage.
 Press the <n> button.
Aconrmationmessageis
displayed.
 Press the <q><r> buttons or
turn the <5> dial to choose
[OK], and then press the <m>
button.
• Images will not be protected if you switch to Shooting
modeorturnthecameraoffbeforenishingthesetup
process in step 3.