Technical information

3-28
SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 102. SCNT board, Power supply unit
(1) Perform Disassembly 101.
(2) Disconnect all the cables from the SCNT board.
(3) Remove the 4 screws (a), and detach the 4 grounding wires.
(4) Remove the 3 screws (b), and detach the SCNT holder.
(5) Remove the power supply cover.
(6) Remove the cable (c) from the SCNT board.
(7) Remove the 5 screws (d), and detach the SCNT board from the SCNT holder.
(8) Remove the 2 screws (e), and detach the power supply unit from the SCNT holder.
Figure 3-25 Disassembly 102
b
b
a
a
SCNT
board
Power supply unit
SCNT holder
Power supply cover
d
d
d
c
e