Technical information

4-40
SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
Figure 4-19 Service Data (page 6)
If USER SW is selected from #8 CLEAR, the memory management of the user data is
not cleared. If TEL or SERVICE SW is selected, the memory management of the user
data is cleared.
For details on test mode, see 6.2 Service Test Functions on page 4-57 .
NOTE
#8 CLEAR
#9 ROM
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
(Data initialization mode
settings)
(ROM management)
Version No. and Checksum display
TEST MODE
(See page 4-57)
#10 CS SET
SERVICE REPORT
SERVICE & SYSTEM
SERVICE DATA
SYSTEM DUNP
EC-XX-XX