SELPHY ES1 User Guide

68
Print is not ejected.
Paper has jammed inside the
printer.
z Remove the cover below
the paper-handling slot
(the cover can be opened
by laying the printer down,
placing your fingers on
both sides of the cover and
lifting up) and remove the
jammed paper.
Re-attach the cover.
The print receptacle cover
did not open.
z If the print receptacle cover does not open automatically
and paper gets jammed, press the print receptacle button
on the left side of the operation panel to open the print
receptacle cover and remove the jammed paper.
The printer’s power button lights red without the camera’s LCD monitor displaying
any error message.
There is a malfunction in the
printer.
z Remove the paper from the paper-handling slot and take
up any slack in the ink sheet. Turn the printer’s power off
and turn it on again.
Print quality is not good.
The ink sheet or paper is
dirty.
z Use a clean cartridge.
z Store the cartridge so that dust does not accumulate on it.
Condensation has formed
inside the printer.
z Wait for condensation to evaporate (p. 13).
Faint stripes appear in the print.
Dust has accumulated inside
the printer.
z Remove the dust inside the printer using the cleaner unit
(p. 66).
Printed images are distorted.
The printer is too close to a
TV, video game machine, or
other electromagnetic
source.
z Move the printer so that it is at least 1 meter (3.3 ft.) away
from the electromagnetic source.
The printer is too close to a
stereo speaker, large motor,
or other strong magnetic
source.
z Move the printer away from the strong magnetic source.
There is not enough ink left for the allotted sheets in the set.
You turned the printer’s
power on and off repeatedly.
z Please avoid turning the printer’s power on and off
needlessly as the printer initialization consumes ink. There
may not be enough ink left for the allotted sheets in the
set.
You pulled on the ink sheet. z Do not forcefully pull on the ink sheet.